Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"lowering aluminum blocks" Page 1 of 8

  • Speedway Aluminum Extruded Leaf Spring Lowering Blocks
    Speedway Aluminum Extruded Leaf Spring Lowering Blocks
    x
                

    Our lightweight extruded aluminum lowering blocks are stronger than billet!  Available in several heights, all 2-1/2" wide, 5" long.  The centering pin is 9/16".  These blocks will increase or decrease suspension height on most leaf spring applications and can be installed below the leaf spring to raise the vehicle or on top of the leaf spring to lower the vehicle. These lowering blocks allow you to lower your leaf spring vehicle by up to 4 inches.  Heavy Duty U-bolts and hardware are available separately.

    • Lightweight aluminum lowering blocks are stronger than billet
    • 2-1/2" wide
    • 5" long
    • 9/16" centering pin
    • Increase or decrease suspension height on most leaf spring applications
    • Allows you to lower your leaf spring vehicle by up to 4 inches
    • U-bolts and hardware available separately

    Lowering blocks are sold individually (each).

    THICKNESS options explained:

    • 025 = 1/4" thick
    • 050 = 1/2" thick
    • 075 = 3/4" thick
    • 100 = 1" thick
    • 150 = 1.5" thick
    • 200 = 2" thick
    • 250 = 2.5" thick
    • 300 = 3" thick
    • 350 = 3.5" thick
    • 400 = 4" thick
  • Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    x
                

    Cast aluminum 3-groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Three grooves for 3 V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head with a standard exhaust port design.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Five angle valve job
    • Bronze guides
    • Straight plug
    • 3/8" screw-in studs and guide plates
    • Port for temperature probe
    • Works well with most flat tappet street cams

    Flow Numbers:

    • Valve Lift     .400"     .500"     .600"
    • Intake           206       237       244   
    • Exhaust        165       177       187
  • Small Block Chevy Aluminum Double Lower Pulley, Short Pump
    Small Block Chevy Aluminum Double Lower Pulley, Short Pump
    x
                

    Cast aluminum double groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Double grooves for two V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Cast Alum. Short Pump Double Groove Lower Pulley
    Small Block Chevy Cast Alum. Short Pump Double Groove Lower Pulley
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 5-7/16" diameter

    Available for Short style pumps ('55-'68). Fits a 5/8" shaft.

    Note: The lower crank pulleys are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended. 

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • 1969-1985 Small Block Chevy Aluminum Triple Lower Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Triple Lower Pulley, Long Pump
    x
                

    Cast aluminum triple groove V-belt crankshaft pulley for use with '69-'85 Small Block Chevy long style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Three grooves for V-belts
    • Mounting face to first groove:  1.090"
    • First groove to second groove:  .625"
    • Second groove to third groove:  .687"
    • Overall Thickness:  2.77"
    • Diameter:  6-5/8"
  • 1969-1985 Small Block Chevy Aluminum Double Lower Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Double Lower Pulley, Long Pump
    x
                

    Cast aluminum double groove V-belt crankshaft pulley for use with '69-'85 Small Block Chevy long style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Two grooves for V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • 1969-1985 Small Block Chevy Aluminum Single Lower Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Single Lower Pulley, Long Pump
    x
                

    Cast aluminum single groove V-belt crankshaft pulley for use with '69-'85 Small Block Chevy long style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • From balancer to outer edge of pulley is 2-3/4"
    • From outer edge to center of V-belt groove is 5/16"
    • Diameter is 6-5/8"
  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • Small Block Chevy Aluminum Single Lower Pulley, Short Pump
    Small Block Chevy Aluminum Single Lower Pulley, Short Pump
    x
                

    Cast aluminum single groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • This pulley has "0" offset and is flat against balancer
    • From edge of pulley to center of V-belt groove is 5/16"
    • Diameter is 6-5/8"

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

     

  • Reduction Pulley Combo for Small Block Chevy Long Pump
    Reduction Pulley Combo for Small Block Chevy Long Pump
    x
                

    Combo includes cast aluminum double-groove aluminum water pump pulley, crank pulley, and matched pair of heavy duty belts. Slows water pump speed by 20% for increased horsepower.

    For Small Block Chevy V8s with '69-'86 long style water pumps with 5/8" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • KRC Small Block Chevy Aluminum Lower Pulley Spacer
    KRC Small Block Chevy Aluminum Lower Pulley Spacer
    x
                Billet aluminum lower crankshaft pulley spacer for Small Block Chevy engines. Choose thickness.
            
  • Speedway Lower Crank Pulley Spacers for Small Block Chevy
    Speedway Lower Crank Pulley Spacers for Small Block Chevy
    x
                Billet aluminum lower crankshaft pulley spacers for  Small Block Chevy engines. Available in 3 widths, .200", .250", and  .375" to provide precise pulley alignment for your application.
    • Billet aluminum
    • Natural finish
    • 3-bolt configuration
    • 4" O.D.
    • 0.88" I.D.
    • .200", .250", or .375" thick
    • Sold each
  • Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    x
                

    You don't need to spend a fortune to get a set of top-performing, lightweight aluminum cylinder heads for your small-block Ford V8. These Flo-Tek heads have a long list of high-end features, minus the hefty price tag. Sold as complete assemblies only.

    • 180cc intake runners
    • 62cc exhaust runners
    • 1.94" intake and 1.54" swirl-polished exhaust valves
    • 58cc chambers
    • Performance valve springs (.550 lift)
    • 115 lbs. spring seat pressure
    • Compatible with most flat tappet camshafts
    • Hardened locks and retainers
    • PC seals
    • High-temp exhaust seats
    • Multi angle valve job
    • Bronze guides
    • 3/8" rocker studs and guide plates

    See how these Flo-Tek heads stack up against the competition in Car Craft Magazine's tech article; 6 Small Block Ford Cylinder Heads That Work.

    Head Flow Specs:

    Lift        Intake        Exhaust
    .400      209          137
    .500      223          161
    .600      248          191

  • AFCO 20247 Aluminum Leaf Spring Lowering Block, 1-1/2 Inch
    AFCO 20247 Aluminum Leaf Spring Lowering Block, 1-1/2 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • AFCO 20246 Aluminum Leaf Spring Lowering Block, 1 Inch
    AFCO 20246 Aluminum Leaf Spring Lowering Block, 1 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • AFCO Aluminum Leaf Spring Lowering Block, 1/4 Inch
    AFCO Aluminum Leaf Spring Lowering Block, 1/4 Inch
    x
                

    AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long.

  • AFCO 20245 Aluminum Leaf Spring Lowering Block, 3/4 Inch
    AFCO 20245 Aluminum Leaf Spring Lowering Block, 3/4 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • AFCO Aluminum Leaf Spring Lowering Block, 3 Inch
    AFCO Aluminum Leaf Spring Lowering Block, 3 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • AFCO Aluminum Leaf Spring Lowering Block, 2 Inch
    AFCO Aluminum Leaf Spring Lowering Block, 2 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • AFCO Aluminum Leaf Spring Lowering Block, 1/2 Inch
    AFCO Aluminum Leaf Spring Lowering Block, 1/2 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • AFCO Aluminum Leaf Spring Lowering Block, 2-1/2 Inch
    AFCO Aluminum Leaf Spring Lowering Block, 2-1/2 Inch
    x
                AFCO lightweight extruded aluminum lowering blocks are stronger than billet. Lowering blocks act like a weight jack and put wedge into the race car. All sizes are 2-1/2" wide x 5" long with a 9/16" diameter centering pin.
            
  • Universal Lowering Block Kit, 2 Inch
    Universal Lowering Block Kit, 2 Inch
    x
                

    Kit includes 2 extruded aluminum lowering blocks complete with four 1/2" U-bolts and hardware. Blocks are 2-1/2" wide x 5" long. U-bolts fit 3" diameter axle housings and are 10" long. 

    910-43809 Instructions (PDF)


  • Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    x
                
    • Positions lower hose (inlet) on the passenger side (1-3/4" diameter)
    • Allows use of a Chevy style radiator
    • 2" shorter than stock Ford pump 
    • Weighs 13.75 lbs. less than stock cast iron pump set-up
    • Fits 1963-1988 Ford 302 and 351 (Cleveland or Windsor)
    • Includes standard aluminum water pump
    • Aluminum adapter included
    • Machined aluminum 2-groove crank pulley and 1-groove water pump pulley
  • Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Speedway Double Pass Aluminum Radiator, Ford-Mopar
    Speedway Double Pass Aluminum Radiator, Ford-Mopar
    x
                

    Leave it to Speedway Motors to offer you a professional quality aluminum racing radiator at an affordable price. This aluminum double pass racing radiator works for Ford/Mopar applications with both necks on the driver's side. 

    • All-aluminum, furnace-brazed construction
    • No epoxy glue or crimped in gaskets
    • Maximum amount of fins per inch allows greater heat transfer
    • Two rows of 1" aluminum tubes (out cools five rows of copper)
    • Billet filler neck, neck not stamped

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

     

  • Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, Multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Multi angle valve job
    • Bronze guides
    • 3/8" screw-in studs and guide plates
  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Gaerte Engines GEP 8001 Small Block Chevy Billet Aluminum Timing Cover
    Gaerte Engines GEP 8001 Small Block Chevy Billet Aluminum Timing Cover
    x
                

    This billet aluminum timing cover for small block Chevys is both strong and lightweight. Cover fits SBC engines 1955-84 model years. Gaerte designed this cover for use in dirt late model racing applications but can be used in other forms of racing. 

    Add an adjustable timing pointer (sold separately) and you're good to go.

  • Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove water pump pulley and double groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with either a 5/8" or 3/4" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • 1960-72 Chevy Pickup Rear Lowering Block Kit, 1 Inch
    1960-72 Chevy Pickup Rear Lowering Block Kit, 1 Inch
    x
                This is an easy and inexpensive way to lower your truck without affecting ride quality. Kits include aluminum blocks and new u-bolts.
            
  • Small Block Chevy Aluminum Windage Tray
    Small Block Chevy Aluminum Windage Tray
    x
                

    Bolt-in replacement, louvered windage tray for S/B Chevy champ style pan. Add horsepower and lower oil temperatures.

    Works great with pan 91015108 when replacing the steel plate bolted to the bottom of the pan.

    Fits in pan 91015137 but there is no way to attach the tray. Will need to come up with a way to mount it in the pan.

    Fits with pan 91015106 but it doesn't fit the existing bolt pattern and would require a new way to mount as well as removing the studs in the pan.

    Note: Not applicable to # 91015104 champ style pan.

  • KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    x
                Please view the product's page for more information
            
  • Small Block Chevy Cast Alum. Long Pump Double Groove Lower Pulley
    Small Block Chevy Cast Alum. Long Pump Double Groove Lower Pulley
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    This is a 25% reduction pulley when used with the correct upper pulley, part number 91015476.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 910-15488
      • 5-7/16" O.D.

    Available for long water pumps. 5/8" shaft.

    Note: The lower crank pulleys are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended. 

     

  • Ford 302/351W High Performance Aluminum Short Water Pump
    Ford 302/351W High Performance Aluminum Short Water Pump
    x
                

    Each aluminum pump is manufactured from T6 aluminum and features a revised impeller entry with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation.

    • Fan hub has a 1-3/4" bolt pattern
    • The lower hose comes out on the driver's side and uses a 1-3/4" lower hose

    Includes a heavy duty bearing and 3/4" shaft and pulley snout; and 1/2" NPT hole on the passenger side (for heater hose) and on the top (for by-pass hose). Thicker (0.100") stamped steel rear plate. Weighs 6 lbs.

    Ford 302/351W Water Pump Installation Instructions (PDF)

  • Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Low-drag impeller adds 14HP @ 7,500 RPM 
    • Includes integral cam stop boss
    • Overall length of 5.603" from rear mounting face to hub face  

    Fits 1955-1968 “Short” design 5/8" shaft S/B Chevy appliactions. Note: Pump will not clear a billet 910-11040 timing cover.

    545-63500 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • KRC KIT16320015 Serpentine Drive Kit-GM-Block Mt Pump/Idler Tensioner
    KRC KIT16320015 Serpentine Drive Kit-GM-Block Mt Pump/Idler Tensioner
    x
                Please view the product's page for more information
            
  • Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    x
                
    This intake for 3 deuces on a small block Ford does NOT have clearance for the Powerfire, Flamethrower, OEM, or any HEI style distributor. It requires the smaller cap as available on distributor 547-8352
    • 289-302 Small Block Ford 3 deuce aluminum intake
    • Designed to use 3 bolt carburetors such as the Speedway 9 Super 7's
    • For Stock/OEM standard deck
    • RPM range, Idle-5,500
    • Low Rise, Dual-plane design
    • Improved throttle response
    • Made of aluminum
    • Natural finish
Goto Previous PagePrevious Page
1 2 3 4 5 ... 8