Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"long alloy ball joint" Page 1 of 1

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .5 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .5 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .5" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.346"
    • Dimension "L" - 3.84"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint.  They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720038-1 and MOOG #K6117.

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joints Illustration (GIF)

  • Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.
    • Bolt-in (4-bolt) style and cross reference with MOOG #K6136.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1995 Chevy & GMC Trucks 

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • GM F-Body - 1969-81 Camaro/Firebird
    • GM X-Body - 1968-79 Nova/Apollo/Ventura, etc.
    • GM B-Body - 1971-96 Impala/Caprice
    • GM A-Body - 1964-81 Chevelle/Malibu/El Camino
    • GM G-Body - 1978-88 Monte Carlo/Regal/Cutlass

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22421 GM K5103 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22421 GM K5103 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K5103.
    • 1964-72 Chevelle ball joint
    • 1967-1969 Camaro/Firebird ball joint

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22421S GM K5103 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22421S GM K5103 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, 1 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, 1 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • 1" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.846"
    • Dimension "L" - 4.34"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .75 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .75 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .75" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.596"
    • Dimension "L" - 4.09"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .2" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.046"
    • Dimension "L" - 3.54"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, steel adjuster - IMCA Approved

    Precision Ball Joint Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, aluminum adjuster

    These are press-in style and cross reference Speedway part #91720038 and MOOG #K6141.

    Precision Ball Joints Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • Howe Racing 22320S 1968-89 Chrysler K772 Style Upper Ball Joint Steel
    Howe Racing 22320S 1968-89 Chrysler K772 Style Upper Ball Joint Steel
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    IMCA Approved. Same as Moog # K772.

    Precision Ball Joint Illustration

  • Howe 22300S 1963-71 Truck K6024 Style Upper Ball Joint/Steel Adjuster
    Howe 22300S 1963-71 Truck K6024 Style Upper Ball Joint/Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    1. This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds.
    2. This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Fits:

    • Mastersbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Howe, Shaw, Bullitt, Rayburn, Harris

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22300 1963-71 Truck K6024 Style Upper Ball Joint/Alum Cap
    Howe Racing 22300 1963-71 Truck K6024 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    1. This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds.
    2. This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Fits:

    • Mastersbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Howe, Shaw, Bullitt, Rayburn, Harris

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap
    Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    NOT IMCA Approved.

    Precision Ball Joint Illustration

    Precision Lower Ball Joint Application Chart

  • Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
    Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    IMCA Approved.

    Precision Ball Joint Illustration

    Precision Lower Ball Joint Application Chart

  • Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K6145.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Upper 917-22302

    • Bolt-in (4-bolt) style and cross reference with MOOG #K5208.
    Fits
    • 1970-81 Camaro/Firebird
    • 1973-81 Chevelle A-body
    • 1975-79 Nova
    • 1978-88 Monte Carlo G-body
    • 1971-96 Impala/Caprice 

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22320 68-89 Chrysler K772 Style Upper Ball Joint Aluminum Cap
    Howe Racing 22320 68-89 Chrysler K772 Style Upper Ball Joint Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    NOT IMCA Approved.

    Precision Ball Joint Illustration

  • Howe Racing 22420 GM K6145 Style Lower Ball Joint w/ Alum Cap
    Howe Racing 22420 GM K6145 Style Lower Ball Joint w/ Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720039 and MOOG #K6145.

    Precision Ball Joints Illustration (GIF)

    See Application tab for corresponding vehicle models. 

  • Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1976 Chevy Impala 

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22480 Repl Ball Joint Stud for 917-22421 K5103 Style
    Howe Racing 22480 Repl Ball Joint Stud for 917-22421 K5103 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1964-1972 Chevelle & Malibu 

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22470 Repl Ball Joint Stud for 917-22420 K6145 Style
    Howe Racing 22470 Repl Ball Joint Stud for 917-22420 K6145 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1977-1989 Impala
    • 1970-1981 Camaro
    • 1973-1988 Chevelle & Malibu

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22350 Repl Ball Joint STud for 917-22301 K6136 Style
    Howe Racing 22350 Repl Ball Joint STud for 917-22301 K6136 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1973-1995 Chevy Blazer and GMC Truck

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22360 Repl Ball Joint Stud for 917-22302 K5208 Style
    Howe Racing 22360 Repl Ball Joint Stud for 917-22302 K5208 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1994 Impala
    • 1970-1981 Camaro
    • 1973-1988 Chevelle & Monte Carlo

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22440 Repl Ball Joint Stud for 917-22412 K727 Style
    Howe Racing 22440 Repl Ball Joint Stud for 917-22412 K727 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1960-1966 Chrysler Imperial

    For Howe Precision Ball Joints ONLY.

  • Garage Sale - Howe GM K5103 Lower Precision Ball Joint
    Garage Sale
    Garage Sale - Howe GM K5103 Lower Precision Ball Joint
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K5103.
    • 1964-72 Chevelle ball joint
    • 1967-1969 Camaro/Firebird ball joint

    Precision Ball Joint Illustration (GIF)

     

    This ball joint is garage sale priced because it has been test fit and returned. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS