Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"lokar throttle cable" Page 1 of 2

  • Lokar SRK-4000 Carburetor Bracket and Return Spring
    Lokar SRK-4000 Carburetor Bracket and Return Spring
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includes allen wrench to adjust the set screw.

  • Lokar Hi-Tech Stainless Throttle Cable Kit
    Lokar Hi-Tech Stainless Throttle Cable Kit
    x
                

    Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

  • Lokar Universal Black Throttle Cable Kit
    Lokar Universal Black Throttle Cable Kit
    x
                

    Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

    491-1000U Instructions (PDF)

  • Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
    Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
    x
                These Lokar stainless throttle cable brackets mount  to the rear of your Holley, Edelbrock, AFB, Quadrajet, or inline dual  carburetors. These brackets are used to mount Lokar's throttle cable and  kickdown assemblies.
    • Mounts to carburetor base
    • Accepts Transmission Kickdown Cable
    • Accepts Throttle Return Spring
    • Return Spring Included
    • Hardware Included
    • Stainless steel bracket
    • Black powdercoated
    • Sold individually
  • Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
    Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
    x
                

    These bracket kits are Lokar's answer to LT1 cable problems. Stainless throttle and kickdown brackets replace factory brackets. Kit includes stainless arm to mount on LT1 throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.

    • Stainless throttle and kickdown brackets
    • Replace factory brackets
    • Includes stainless arm to mount on LT1 throttle body to operate kickdown
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns (see below for part #s)
  • Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Pedal pad is 2” by 6-3/4”
    • Pad is parallelogram in shape and NOT rectangle
    • Brushed billet aluminum finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

     

  • Lokar TC-1000EFI EFI 1994 & 1995 Ford EFI Only Hi-Tech Throttle Cable
    Lokar TC-1000EFI EFI 1994 & 1995 Ford EFI Only Hi-Tech Throttle Cable
    x
                

    Lokar Hi-Tech Throttle Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in a 24" length with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Cables mount nicely with Lokar's array of Brackets and Return Springs (sold separately). Kits complete with installation instructions.

    • Designed with a specially extruded liner for extended life of the cable 
    • Equipped with aluminum fittings and aluminum ferrules to eliminate fraying
    • Adapts to factory and aftermarket pedals
    • Complete with installation instructions

    Note: For 1986 - 1993 EFI, use # 491-1000HT-24 or 491-1000U-24 cables

    Throttle Body and Carb End Fittings Guide (Link)

    EFI Throttle Cable Installation Instructions (PDF)

  • Lokar TC-1000TPV Vortec Hi-Tech Throttle Cable, 36 Inch
    Lokar TC-1000TPV Vortec Hi-Tech Throttle Cable, 36 Inch
    x
                

    Lokar Hi-Tech Throttle Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in  36" lengths with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Cables mount nicely with Lokar's array of Brackets and Return Springs (sold separately). Kits complete with installation instructions.

    • Designed with a specially extruded liner for extended life of the cable 
    • Equipped with aluminum fittings and aluminum ferrules to eliminate fraying
    • Adapts to factory and aftermarket pedals
    • Complete with installation instructions

    Throttle Body and Carb End Fittings Guide (Link)

    Vortec Throttle Cable Installation Instructions (PDF)

     

  • Lokar TRP-4003 Tri-Power Throttle Cable Bracket and Springs, Stainless
    Lokar TRP-4003 Tri-Power Throttle Cable Bracket and Springs, Stainless
    x
                

    Designed for Rochester Tri-Power. Kit includes stainless steel throttle cable bracket and stainless steel springs. Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up. Cables operate from center carburetor. Stainless bracket and dual stainless springs are used to mount Lokar's throttle cable and kickdown assemblies.

    • For Rochester Tri-Power
    • Includes stainless steel throttle cable bracket and stainless steel springs
    • Mounts under rear carburetor on Rochester 3-2 set-up
    • Cables operate from center carburetor
  • Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
    Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops. Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Use 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Black finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

  • Lokar XTCB-40DQ Throttle Cable Bracket For Edelbrock Performer Carbs
    Lokar XTCB-40DQ Throttle Cable Bracket For Edelbrock Performer Carbs
    x
                Throttle Cable Bracket, Manifold Mounting. For Edelbrock Performer or Performer AVS Carbs.
    • Black anodized
    • Billet aluminum
    • Bracket Mounts to intake manifold
    • Accepts Transmission Kickdown Cable
    • Accepts Throttle Return Spring
    • Return Spring NOT Included
    • Hardware NOT Included
  • Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    x
                Please view the product's page for more information
            
  • Lokar XTC-1000HT36 36 Inch Black Stainless Hi-Tech Throttle Cable
    Lokar XTC-1000HT36 36 Inch Black Stainless Hi-Tech Throttle Cable
    x
                Lokar's "U-Cut-to-Fit" Hi-Tech Throttle Cables are available in black  stainless steel braided housing. They are              designed with a  specially extruded liner for extended life  of the cable – not to be  confused with ordinary brake hose. 36" throttle cable features aluminum fittings  with ferrule to eliminate frayed cable ends. These throttle cables are adaptable  for all types of manifolds including tunnel  ram, blower manifolds and  Weber induction systems.  Mount our throttle cable  with our Stainless Steel             Carburetor Bracket and Return Springs (sold separately).    Complete instructions included in kit.
            
  • Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

    • Recipient of NSRA best new product
    • Eliminates routing cables through firewall
    • Billet aluminum splined adjustable shaft
    • Stainless steel "under-the-floor" cable mounting bracket
    • Mounts in multiple positions
    • Built-in pedal travel stops

    Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

  • Lokar BAG-6142 68-72 Nova Billet Aluminum Throttle Pedal Assembly
    Lokar BAG-6142 68-72 Nova Billet Aluminum Throttle Pedal Assembly
    x
                

    Direct replacement throttle pedal assemblies for 1962-1972 Chevy II/Nova with rubber inserts eliminate the factory rod linkage, are designed to mount in the original firewall location, and utilize a modern Lokar throttle cable system. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad, which is spring-loaded and measures 2"x5". Available in a brushed finish.

    • Direct replacement to eliminate the factory rod linkage
    • Mount in the original firewall location
    • Utilize a modern Lokar throttle cable system
    • Splined arms for fine adjustment
    • Arms can be mounted on right or left side of throttle pad
    • Spring-loaded pad measures 2" x 5"
    • Rubber inserts
    • Brushed finish

    Tech Note:
    Lokar's 1968-1972 Nova throttle pedal is designed to replace rod style throttle linkage only. Part Nos. BAG-6142 and XBAG-6142. To complete the installation use Lokar's throttle cables and mounting brackets.

  • Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    x
                Save with Lokar's Duo-Pak Hi-Tech Throttle Cable Kits.  The kit is   equipped with a Throttle Cable in stainless housing plus our  Stainless  Steel Carburetor Bracket and Return Spring Kit.  Duo-Pak only  available  for carbureted applications with Holley, Edelbrock, AFB,  Quadrajet and  In-Line Dual Quad carbs.
            
  • Lokar TCP-1000HT Polished Hi-Tech Throttle Cable, 24 Inch
    Lokar TCP-1000HT Polished Hi-Tech Throttle Cable, 24 Inch
    x
                

    Looking for more shine in your engine compartment? Try Lokar's 24" Polished Hi-Tech Throttle Cables.  They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

     

  • Lokar XBAG-6074 55-57 Chevy Black Billet Alum Throttle Pedal Assembly
    Lokar XBAG-6074 55-57 Chevy Black Billet Alum Throttle Pedal Assembly
    x
                

    The Lokar 1955-1957 Chevy billet aluminum throttle assembly is designed to convert original rod linkage to Lokar's modern throttle cable system. It is designed to mount in original firewall location with offset bezel washers to align cable through firewall. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. The throttle pad is spring-loaded like OEM design and measures 2" x 5".

    • Converts original rod linkage to Lokar's modern throttle cable system
    • Mounts in original firewall location
    • Offset bezel washers align cable through firewall
    • Splined arms for fine adjustment
    • Arms can be mounted on right or left side of throttle pad
    • Spring-loaded pad
    • Pad measures 2" x 5"

    49106074 Installation Instructions (PDF)

  • Lokar BAG-6113 55-57 Chevy Throttle Pedal Assembly for Big Block Chevy
    Lokar BAG-6113 55-57 Chevy Throttle Pedal Assembly for Big Block Chevy
    x
                

    The Lokar 1955-1957 Chevy billet aluminum throttle assembly is designed to convert original rod linkage to Lokar's modern throttle cable system. It is designed to mount in original firewall location with offset bezel washers to align cable through firewall. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. The throttle pad is spring-loaded like OEM design and measures 2" x 5".

    • Converts original rod linkage to Lokar's modern throttle cable system
    • Mounts in original firewall location
    • Offset bezel washers align cable through firewall
    • Splined arms for fine adjustment
    • Arms can be mounted on right or left side of throttle pad
    • Spring-loaded pad
    • Pad measures 2" x 5"
    • 1" longer upper arm for Big Block applications

    4916113 Installation Instructions (PDF)

  • Lokar BAG-6165 71-72 Chevy/GMC C10 Billet Alum Throttle Pedal Assembly
    Lokar BAG-6165 71-72 Chevy/GMC C10 Billet Alum Throttle Pedal Assembly
    x
                

    These direct replacement throttle assemblies for 1971-1972 Chevy Truck feature rubber inserts and are designed to convert original rod linkage to Lokar's modern throttle cable system. They are designed to mount in original firewall location with offset bezel washers to align cable through firewall. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. The throttle pad is spring-loaded like OEM design and measures 2" x 5". These billet aluminum assemblies are available in a brushed finish.

    • Direct replacement (mounts into the factory location)
    • Billet aluminum construction
    • Adjustable upper and lower arms
    • 48 tooth fine spline
    • Delrin bushings for smooth operation
    • Compatible with Lokar cables
    • Brushed finish

      * Replaces factory rod linkage with cable linkage

    4916165 Installation Instructions (PDF)

  • Lokar BAG-6164 67-70 Chevy/GMC C10 Billet Alum Throttle Pedal Assembly
    Lokar BAG-6164 67-70 Chevy/GMC C10 Billet Alum Throttle Pedal Assembly
    x
                

    These direct replacement throttle assemblies for 1967-1970 Chevy Truck feature rubber inserts and are designed to convert original rod linkage to Lokar's modern throttle cable system. They are designed to mount in original firewall location with offset bezel washers to align cable through firewall. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. The throttle pad is spring-loaded like OEM design and measures 2" x 5". These billet aluminum assemblies are available in a brushed finish.

    • Direct replacement (mounts into the factory location)
    • Billet aluminum construction
    • Adjustable upper and lower arms
    • 48 tooth fine spline
    • Delrin bushings for smooth operation
    • Compatible with Lokar cables
    • Brushed finish

      * Replaces factory rod linkage with cable linkage

    4916164 Installation Instructions (PDF)

  • Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs
    Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs
    x
                This slick billet aluminum bracket mounts at the back of your Edelbrock carb and makes throttle cable, return spring and kickdown cable mounting easy. Includes zinc coated allen head bolts measuring 1-1/2" in length.
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Bracket designed to fit single or dual quad carbs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • Attaches to both rear and carb bolts to eliminate bracket movement
    • Bracket utilizes either bolt pattern offered on Edelbrock carbs & manifolds
  • Lokar TCB-40EFI Stainless Steel Ford EFI Throttle Cable Bracket
    Lokar TCB-40EFI Stainless Steel Ford EFI Throttle Cable Bracket
    x
                

    These Ford EFI Brackets fit 1986 to 1993 Ford 302 and 351 electronic fuel injection systems that have installed the Mustang EGR spacer. This Stainless Bracket mounts in stock location for easy installation of Lokar Kickdown Cables and Throttle Cables. (1986 to 1993 uses  4911000HT-24)

    • 1986 to 1993 Ford 302 and 351 electronic fuel injection systems with Mustang EGR spacer
    • Mounts in stock location for easy installation of Lokar Throttle Cable (4911000HT)

    Note: The EFI Bracket does not fit B.A.P. throttle bodies.

  • Lokar XBAG-6127 62-67 Chevy II/Nova Aluminum Throttle Pedal Assembly
    Lokar XBAG-6127 62-67 Chevy II/Nova Aluminum Throttle Pedal Assembly
    x
                

    Direct replacement Throttle Pedal Assemblies for 1962-1972 Chevy II/Nova with ball-milled pads or rubber inserts eliminate the factory rod linkage, are designed to mount in the original firewall location and utilize a modern Lokar Throttle Cable system. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad, which is spring-loaded and measures 2"x5".

    For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads. These curved brake/clutch pedal pads add style and function to your classic car. Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake/clutch pedal. Each brake/clutch pedal pad has been fashioned after its corresponding factory rubber pad and is available in a black finish.

    • Direct replacement for 1962-1972 Chevy II/Nova
    • Ball-milled pads with rubber inserts
    • Eliminate the factory rod linkage
    • Mount in the original firewall location and utilize a modern Lokar Throttle Cable system
    • Arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad
    • Spring-loaded and measures 2"x5"
    • Black finish

    Throttle Pedal Assembly Installation Instructions (PDF)

  • Lokar DP-1000HT 24 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    Lokar DP-1000HT 24 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    x
                

    These Lokar Duo-Pak throttle cables have a PTFE inner liner and a stainless steel outer covering, along with aluminum Clevis ends for smooth, no-bind cable operation. The cables easily adapt to most gas pedals and throttle assemblies. They include a throttle return spring and mounting bracket to complete installation.

    • 24" cable length
    • Braided stainless steel cable jacket
    • Natural finish
    • Braided stainless wire cable
    • Brackets included
    • End fittings included
    • Sold as a kit

     

  • Lokar TCB-40BG Throttle & Kickdown Cable Bracket for BG Six Shooter
    Lokar TCB-40BG Throttle & Kickdown Cable Bracket for BG Six Shooter
    x
                This slick billet aluminum bracket mounts at the back of the rear carb on your Barry Grant Six Shooter setup and makes the throttle cable, return spring and kickdown cable mounting easy. 
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Utilizes existing SixShooter Progressive Linkage
  • Lokar XTC-1000HT Midnight Series Hi-Tech Throttle Cable, 24 Inch
    Lokar XTC-1000HT Midnight Series Hi-Tech Throttle Cable, 24 Inch
    x
                These Lokar Midnight Series hi-tech throttle cables have a  PTFE inner liner and a black stainless steel outer covering, along with  aluminum clevis ends for smooth, no-bind cable operation. They can be  easily adapted to fit most gas pedals and throttle assemblies. 
    • 24" long
    • Universal
    • Black, braided stainless steel cable Jacket
    • Braided stainless wire
    • End Fittings Included
  • Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    x
                Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
    Kits come complete with installation instructions.
  • Lokar TC-1000HT48 Hi-Tech Throttle Cable, 48 Inch
    Lokar TC-1000HT48 Hi-Tech Throttle Cable, 48 Inch
    x
                

    All Lokar Hi-Tech Throttle Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 48" lengthswith a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

     

  • Lokar XBAG-6115 64-68 Mustang Billet Aluminum Throttle Pedal w/Rubber
    Lokar XBAG-6115 64-68 Mustang Billet Aluminum Throttle Pedal w/Rubber
    x
                Replace your worn out Mustang hard throttle with  Lokar's 1964-68 Mustang Throttle Pedal. Designed as a direct  replacement for the stock assembly when paired with Lokar Throttle Cable  and Brackets.  Throw away your old stock hard linkages and get a high  quality look that functions smoothly.
    • 6061-T6 Aluminum
    • CNC machined for looks and durability
    • Direct replacement for stock assemblies
    • Spring-loaded Throttle Pedal
    • Delrin bushings for smooth pedal movement
    • Rubber inserts on all pads for traction
    • 3M black adhesive included for installing rubber inserts
    • Easy to install with basic hand tools
    • Black finish

    1964-1968 Mustang Throttle Pedal Assembly Instructions (PDF)

  • Lokar TC-1000BLD Blower Drive Hi-Tech Throttle Cable
    Lokar TC-1000BLD Blower Drive Hi-Tech Throttle Cable
    x
                

    Blower Drive Cables are designed to operate with BDS linkage, Enderle linkage and Weiand linkage for side mounted carburetors. Throttle cables designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing is available in a 24" length with a "U-Cut-to-Fit" stainless inner wire. Blower Throttle Cable comes complete with stainless mounting bracket and rod end.

    • Designed to operate with BDS linkage, Enderle linkage and Weiand linkage for side mounted carburetors
    • Specially extruded liner for extended life of the cable
    • Equipped with aluminum fittings and aluminum ferrule to eliminate fraying
    • Complete with stainless mounting bracket and rod end

    Throttle Body and Carb End Fittings Guide (Link)

    Blower Drive Throttle Cable Installation Instructions (PDF)

  • Lokar KD-2727HT Chrysler 727 Hi-Tech Kickdown Kit
    Lokar KD-2727HT Chrysler 727 Hi-Tech Kickdown Kit
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Kickdown Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems.  Complete instructions included in kit.

    Throttle Body and Carb End Fittings Guide (Link)

    4912727 Installation Instructions (PDF) 

     

  • Lokar TCB-40RJ Stainless 350 Ramjet Throttle Cable Brackets
    Lokar TCB-40RJ Stainless 350 Ramjet Throttle Cable Brackets
    x
                

    These brackets fit the GM Ramjet 350 engine. These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle. When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.

    • GM Ramjet 350 engine
    • Allows the Ramjet to work properly in any vehicle
  • Lokar XTRP-4006 Midnight Series 3 Bolt Carb Throttle Cable Mounting Bracket
    New
    Lokar XTRP-4006 Midnight Series 3 Bolt Carb Throttle Cable Mounting Bracket
    x
                

    Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s.  In Black finish with throttle return springs.

    • For use with 3-bolt Stromberg style carburetors
    • Tri-Power throttle cable / kickdown cable bracket
    • Black finish
    • With throttle return springs
  • Lokar XTRP-4007 Midnight Series 3 Bolt Carb Throttle Cable Mounting Plate
    New
    Lokar XTRP-4007 Midnight Series 3 Bolt Carb Throttle Cable Mounting Plate
    x
                

    Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s. 

    • For use with 3-bolt Stromberg style carburetors
    • Tri-Power throttle cable / kickdown cable bracket
    • Black finish
    • Mounting plate only
  • Lokar TC-1000LS1 Universal LS1 / 350 Ramjet Throttle Cable, 36 Inch
    Lokar TC-1000LS1 Universal LS1 / 350 Ramjet Throttle Cable, 36 Inch
    x
                You will need the correct throttle cable for your LS1 / 350 Ramjet swap. This cut-to-fit cable looks good and gets the job done.
            
Goto Previous PagePrevious Page
1 2