Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"lokar stainless throttle cable" Page 1 of 1

New (0)

Garage Sale (0)

  • Lokar Hi-Tech Stainless Throttle Cable Kit
    Lokar Hi-Tech Stainless Throttle Cable Kit
    x
                

    Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

  • Lokar SRK-4000 Carburetor Bracket and Return Spring
    Lokar SRK-4000 Carburetor Bracket and Return Spring
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includes allen wrench to adjust the set screw.

  • Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
    Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
    x
                These Lokar stainless throttle cable brackets mount  to the rear of your Holley, Edelbrock, AFB, Quadrajet, or inline dual  carburetors. These brackets are used to mount Lokar's throttle cable and  kickdown assemblies.
    • Mounts to carburetor base
    • Accepts Transmission Kickdown Cable
    • Accepts Throttle Return Spring
    • Return Spring Included
    • Hardware Included
    • Stainless steel bracket
    • Black powdercoated
    • Sold individually
  • Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
    Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
    x
                

    These bracket kits are Lokar's answer to LT1 cable problems. Stainless throttle and kickdown brackets replace factory brackets. Kit includes stainless arm to mount on LT1 throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.

    • Stainless throttle and kickdown brackets
    • Replace factory brackets
    • Includes stainless arm to mount on LT1 throttle body to operate kickdown
    • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns (see below for part #s)
  • Lokar TRP-4003 Tri-Power Throttle Cable Bracket and Springs, Stainless
    Lokar TRP-4003 Tri-Power Throttle Cable Bracket and Springs, Stainless
    x
                

    Designed for Rochester Tri-Power. Kit includes stainless steel throttle cable bracket and stainless steel springs. Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up. Cables operate from center carburetor. Stainless bracket and dual stainless springs are used to mount Lokar's throttle cable and kickdown assemblies.

    • For Rochester Tri-Power
    • Includes stainless steel throttle cable bracket and stainless steel springs
    • Mounts under rear carburetor on Rochester 3-2 set-up
    • Cables operate from center carburetor
  • Lokar XTC-1000HT36 36 Inch Black Stainless Hi-Tech Throttle Cable
    Lokar XTC-1000HT36 36 Inch Black Stainless Hi-Tech Throttle Cable
    x
                Lokar's "U-Cut-to-Fit" Hi-Tech Throttle Cables are available in black  stainless steel braided housing. They are              designed with a  specially extruded liner for extended life  of the cable – not to be  confused with ordinary brake hose. 36" throttle cable features aluminum fittings  with ferrule to eliminate frayed cable ends. These throttle cables are adaptable  for all types of manifolds including tunnel  ram, blower manifolds and  Weber induction systems.  Mount our throttle cable  with our Stainless Steel             Carburetor Bracket and Return Springs (sold separately).    Complete instructions included in kit.
            
  • Lokar TC-1000EFI EFI 1994 & 1995 Ford EFI Only Hi-Tech Throttle Cable
    Lokar TC-1000EFI EFI 1994 & 1995 Ford EFI Only Hi-Tech Throttle Cable
    x
                

    Lokar Hi-Tech Throttle Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in a 24" length with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Cables mount nicely with Lokar's array of Brackets and Return Springs (sold separately). Kits complete with installation instructions.

    • Designed with a specially extruded liner for extended life of the cable 
    • Equipped with aluminum fittings and aluminum ferrules to eliminate fraying
    • Adapts to factory and aftermarket pedals
    • Complete with installation instructions

    Note: For 1986 - 1993 EFI, use # 491-1000HT-24 or 491-1000U-24 cables

    Throttle Body and Carb End Fittings Guide (Link)

    EFI Throttle Cable Installation Instructions (PDF)

  • Lokar TC-1000TPV Vortec Hi-Tech Throttle Cable, 36 Inch
    Lokar TC-1000TPV Vortec Hi-Tech Throttle Cable, 36 Inch
    x
                

    Lokar Hi-Tech Throttle Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in  36" lengths with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Cables mount nicely with Lokar's array of Brackets and Return Springs (sold separately). Kits complete with installation instructions.

    • Designed with a specially extruded liner for extended life of the cable 
    • Equipped with aluminum fittings and aluminum ferrules to eliminate fraying
    • Adapts to factory and aftermarket pedals
    • Complete with installation instructions

    Throttle Body and Carb End Fittings Guide (Link)

    Vortec Throttle Cable Installation Instructions (PDF)

     

  • Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Pedal pad is 2” by 6-3/4”
    • Pad is parallelogram in shape and NOT rectangle
    • Brushed billet aluminum finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

     

  • Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
    Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops. Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Use 48" cable for LS1, Ramjet and Vortec applications.

    • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
    • Mounts in multiple positions for floor and toe board angles
    • Designed with built-in pedal travel stops
    • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
    • Black finish

    Eliminator Throttle Pedal Installation Instructions (PDF)

  • Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
    x
                

    Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

    • Recipient of NSRA best new product
    • Eliminates routing cables through firewall
    • Billet aluminum splined adjustable shaft
    • Stainless steel "under-the-floor" cable mounting bracket
    • Mounts in multiple positions
    • Built-in pedal travel stops

    Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

  • Lokar Universal Black Throttle Cable Kit
    Lokar Universal Black Throttle Cable Kit
    x
                

    Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

    491-1000U Instructions (PDF)

  • Lokar TCB-40EFI Stainless Steel Ford EFI Throttle Cable Bracket
    Lokar TCB-40EFI Stainless Steel Ford EFI Throttle Cable Bracket
    x
                

    These Ford EFI Brackets fit 1986 to 1993 Ford 302 and 351 electronic fuel injection systems that have installed the Mustang EGR spacer. This Stainless Bracket mounts in stock location for easy installation of Lokar Kickdown Cables and Throttle Cables. (1986 to 1993 uses  4911000HT-24)

    • 1986 to 1993 Ford 302 and 351 electronic fuel injection systems with Mustang EGR spacer
    • Mounts in stock location for easy installation of Lokar Throttle Cable (4911000HT)

    Note: The EFI Bracket does not fit B.A.P. throttle bodies.

  • Lokar XTC-1000HT Midnight Series Hi-Tech Throttle Cable, 24 Inch
    Lokar XTC-1000HT Midnight Series Hi-Tech Throttle Cable, 24 Inch
    x
                These Lokar Midnight Series hi-tech throttle cables have a  PTFE inner liner and a black stainless steel outer covering, along with  aluminum clevis ends for smooth, no-bind cable operation. They can be  easily adapted to fit most gas pedals and throttle assemblies. 
    • 24" long
    • Universal
    • Black, braided stainless steel cable Jacket
    • Braided stainless wire
    • End Fittings Included
  • Lokar DP-1000HT 24 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    Lokar DP-1000HT 24 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    x
                

    These Lokar Duo-Pak throttle cables have a PTFE inner liner and a stainless steel outer covering, along with aluminum Clevis ends for smooth, no-bind cable operation. The cables easily adapt to most gas pedals and throttle assemblies. They include a throttle return spring and mounting bracket to complete installation.

    • 24" cable length
    • Braided stainless steel cable jacket
    • Natural finish
    • Braided stainless wire cable
    • Brackets included
    • End fittings included
    • Sold as a kit

     

  • Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    x
                Please view the product's page for more information
            
  • Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
    x
                Save with Lokar's Duo-Pak Hi-Tech Throttle Cable Kits.  The kit is   equipped with a Throttle Cable in stainless housing plus our  Stainless  Steel Carburetor Bracket and Return Spring Kit.  Duo-Pak only  available  for carbureted applications with Holley, Edelbrock, AFB,  Quadrajet and  In-Line Dual Quad carbs.
            
  • Lokar TC-1000BLD Blower Drive Hi-Tech Throttle Cable
    Lokar TC-1000BLD Blower Drive Hi-Tech Throttle Cable
    x
                

    Blower Drive Cables are designed to operate with BDS linkage, Enderle linkage and Weiand linkage for side mounted carburetors. Throttle cables designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing is available in a 24" length with a "U-Cut-to-Fit" stainless inner wire. Blower Throttle Cable comes complete with stainless mounting bracket and rod end.

    • Designed to operate with BDS linkage, Enderle linkage and Weiand linkage for side mounted carburetors
    • Specially extruded liner for extended life of the cable
    • Equipped with aluminum fittings and aluminum ferrule to eliminate fraying
    • Complete with stainless mounting bracket and rod end

    Throttle Body and Carb End Fittings Guide (Link)

    Blower Drive Throttle Cable Installation Instructions (PDF)

  • Lokar TCP-1000HT Polished Hi-Tech Throttle Cable, 24 Inch
    Lokar TCP-1000HT Polished Hi-Tech Throttle Cable, 24 Inch
    x
                

    Looking for more shine in your engine compartment? Try Lokar's 24" Polished Hi-Tech Throttle Cables.  They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

     

  • Lokar KD-20C6HT Ford C6 Hi-Tech Kickdown Cable Kit-Stainless Housing
    Lokar KD-20C6HT Ford C6 Hi-Tech Kickdown Cable Kit-Stainless Housing
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Ford C6 Kickdown Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. These C6 transmission kickdowns feature a stainless steel braided housing and aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems.  Complete instructions included in kit.

    • For Ford C6 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included

    Throttle Body and Carb End Fittings Guide (Link)

    49102060 Installation Instructions (PDF)

     

  • Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs
    Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs
    x
                This slick billet aluminum bracket mounts at the back of your Edelbrock carb and makes throttle cable, return spring and kickdown cable mounting easy. Includes zinc coated allen head bolts measuring 1-1/2" in length.
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Bracket designed to fit single or dual quad carbs
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Recommended by Edelbrock
    • Attaches to both rear and carb bolts to eliminate bracket movement
    • Bracket utilizes either bolt pattern offered on Edelbrock carbs & manifolds
  • Lokar TC-1000HT48 Hi-Tech Throttle Cable, 48 Inch
    Lokar TC-1000HT48 Hi-Tech Throttle Cable, 48 Inch
    x
                

    All Lokar Hi-Tech Throttle Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 48" lengthswith a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

     

  • Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    x
                

    Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

    Can be mounted in a variety of locations within 48" of carburetor.

  • Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
    x
                Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
    Kits come complete with installation instructions.
  • Lokar TCB-40RJ Stainless 350 Ramjet Throttle Cable Brackets
    Lokar TCB-40RJ Stainless 350 Ramjet Throttle Cable Brackets
    x
                

    These brackets fit the GM Ramjet 350 engine. These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle. When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.

    • GM Ramjet 350 engine
    • Allows the Ramjet to work properly in any vehicle
  • Lokar TCB-40BG Throttle & Kickdown Cable Bracket for BG Six Shooter
    Lokar TCB-40BG Throttle & Kickdown Cable Bracket for BG Six Shooter
    x
                This slick billet aluminum bracket mounts at the back of the rear carb on your Barry Grant Six Shooter setup and makes the throttle cable, return spring and kickdown cable mounting easy. 
    • CNC machined from 6061-T6 billet aluminum for strength and style
    • Easy installation of Lokar Throttle Cable and Kickdown kits
    • Dual Stainless Steel Return Springs
    • All hardware and detailed mounting instructions included
    • Utilizes existing SixShooter Progressive Linkage
  • Lokar TRP-4006 Stainless Steel 3 Bolt Carb Throttle Cable Mounting Bracket
    Lokar TRP-4006 Stainless Steel 3 Bolt Carb Throttle Cable Mounting Bracket
    x
                

    Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s.  In Stainless steel with throttle return springs.

    • Fits most early carbs with 3 bolt mounting flange
    • Stainless Steel
    • With throttle return springs

     

  • Lokar DP-1000U36 36 Inch Duo-Pak Black Throttle Cable Kit, Stainless
    Lokar DP-1000U36 36 Inch Duo-Pak Black Throttle Cable Kit, Stainless
    x
                Please view the product's page for more information
            
  • Lokar TRP-4007 Stainless Steel 3 Bolt Carb Throttle Cable Mounting Plate
    Lokar TRP-4007 Stainless Steel 3 Bolt Carb Throttle Cable Mounting Plate
    x
                

    Designed to be used with early 3 bolt carburetors like the  Stromberg 97, and 94’s.  They will also work on current replacement carburetors like the Speedway Motors 9 Super 7’s, and Edelbrock 94’s. 

    • For use with 3-bolt carburetors 
    • Stainless Steel
    • Mounting plate only
  • Lokar KD-2FMXHT Ford FMX Hi-Tech Kickdown Cable Kit
    Lokar KD-2FMXHT Ford FMX Hi-Tech Kickdown Cable Kit
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Kickdown Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with Lokar's Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit.

    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included

    Throttle Body and Carb End Fittings Guide (Link)

    Hi-Tech Kickdown Cable Installation Instructions (PDF)

  • Lokar XKD-2AODHT Black Hi-Tech Ford AOD Kickdown Cable Kit
    Lokar XKD-2AODHT Black Hi-Tech Ford AOD Kickdown Cable Kit
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

    • Ford AOD transmission applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included in kit

    Throttle Body and Carb End Fittings Guide (Link)

  • Polished Stainless Carburetor Throttle Cable Bracket
    Polished Stainless Carburetor Throttle Cable Bracket
    x
                Polished stainless steel throttle cable bracket mounts to the rear base of most Holley, Edelbrock, AFB, Quadrajet, or dual quad carburetors. Works well with Lokar universal throttle cables.
            
  • Lokar KDP-20C4HT Ford C4 Hi-Tech Kickdown Cable Kit, Polished
    Lokar KDP-20C4HT Ford C4 Hi-Tech Kickdown Cable Kit, Polished
    x
                

    To add more shine to your Ford C4 engine compartment, try Lokar's "U-Cut-to-Fit" Polished Kickdown Cable which features a stainless steel braided housing and polished aluminum fittings with polished ferrule. Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features polished aluminum fittings with polished ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit.

    • Ford C-4 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included

    Throttle Body and Carb End Fittings Guide (Link)

    Hi-Tech Kickdown Cable Installation Instructions (PDF)

  • Lokar XKD-2700HT 700R4 GM Hi-Tech Kickdown Cable Kit, Black
    Lokar XKD-2700HT 700R4 GM Hi-Tech Kickdown Cable Kit, Black
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech 700R4 Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

    • GM 700-R4 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included in kit

    Throttle Body and Carb End Fittings Guide (Link)

    49102700 Installation Instructions (PDF) 

  • Lokar XKD-2350HT GM TH350 Hi-Tech Kickdown Cable Kit, Black
    Lokar XKD-2350HT GM TH350 Hi-Tech Kickdown Cable Kit, Black
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Turbo 350 Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

    • GM TH-350 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included in kit

    Throttle Body and Carb End Fittings Guide (Link)

    49103250 Installation Instructions (PDF) 

  • Lokar TC-1000TP36 GM TPI Throttle Cable, 36 Inch
    Lokar TC-1000TP36 GM TPI Throttle Cable, 36 Inch
    x
                

    36" cut-to-fit braided stainless cable with special end required to attach to GM Tuned Port Injection units.

  • Lokar KD-20C6U Ford C6 Universal Kickdown Cable Kit, Black Housing
    Lokar KD-20C6U Ford C6 Universal Kickdown Cable Kit, Black Housing
    x
                

    To add more shine to your Ford C6 engine compartment, try Lokar's "U-Cut-to-Fit" Polished Kickdown Cables which feature a black housing. Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features polished aluminum fittings with polished ferrule to eliminate frayed cable ends. Ford C6  Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit.

    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included

    Throttle Body and Carb End Fittings Guide (Link)

    Hi-Tech Kickdown Cable Installation Instructions (PDF)

  • Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
    • Stainless steel
    • Improved clearance on Edelbrock carbs
    • Includes tension screw to prevent bracket movement under extreme pressure

    49104001 Installation Instructions (PDF) 

  • Lokar KD-2400U TH400 Electric Kickdown Kit, Black
    Lokar KD-2400U TH400 Electric Kickdown Kit, Black
    x
                

    Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts. Turbo 400 transmission kickdown kit includes "U-Cut-to-Fit" black outer housing. Designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket.  This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal.

    Complete installation instructions for TH400 included in kit.