Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"link kits tie rod" Page 1 of 4

  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                

    These tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. 

  • Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • Chrome Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Chrome Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                Please view the product's page for more information
            
  • Chrome Tie Rod/Drag Link Kit with Stainless 11/16 Inch Tie Rod Ends
    Chrome Tie Rod/Drag Link Kit with Stainless 11/16 Inch Tie Rod Ends
    x
                Please view the product's page for more information
            
  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                

    These unpolished stainless steel tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Specify desired length in comments section of shopping cart. No returns/exchange on custom length links.Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die o

  • Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    x
                Please view the product's page for more information
            
  • Chrome Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    Chrome Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

     

  • Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available in a custom length. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends, Custom Length
    x
                

     

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Specify desired length in comments section of shopping cart. No returns/exchange on custom length links. Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    x
                

     

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    x
                Please view the product's page for more information
            
  • Wishbone Splitting Kit for Tie Rod Ends
    Wishbone Splitting Kit for Tie Rod Ends
    x
                

    To get that traditional look you need to have split wishbones. This kit allows you to weld up your own split bones and includes 11/16" weld-in bungs for the wishbones, jam nuts and 11/16" tie rod ends.

    Cutting & welding required.

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • 1968-1988 GM A/G Body Center Drag Links
    1968-1988 GM A/G Body Center Drag Links
    x
                We stock these hard to find replacement center drag links that are a must when    rebuilding your classic vehicle.  They will give your 1968-1988 GM A/G Body vehicle  overall   better handling and a positive feel while cruising the strip or on the race track.  
    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel

    We stock these hard-to-find stock-style center drag links for:

    • 1968-72 A-Body
    • 1973-77 A-Body
    • 1978-88 A and G-Body
  • Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    x
                Includes standard upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, new black stock type springs and  shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 11" brake kit features GM Metric calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Stock Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-

  • Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    x
                

    Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2&qu

  • Tru-Lite Titanium One Nut Tie Rod-Drag Link Kit
    Tru-Lite Titanium One Nut Tie Rod-Drag Link Kit
    x
                

    Titanium one nut tie rod/drag link 12 piece kit.

    • Thread size is .495-.497 or ½” x 20 threads per inch
    • Threaded end is 1-3/32” long
    • Shouldered end is 1” long
    • Comes with the ¾” thin nylock nuts
  • Basic 1923 T-Bucket Frame Kit
    From: $1,999.99
    Basic 1923 T-Bucket Frame Kit
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

     

     

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
    Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
    x
                Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.) 
    • Not for use with flat steering arms
    • Use only with Ford type steering arms with a tapered hole
    • Not normally used with Chevy spindles

    Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Coilover Springs
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you w

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    x
                Please view the product's page for more information
            
  • Nostalgia 1923 T-Bucket Frame Kit
    From: $2,499.99
    Product Rating: 5.00 Stars
    Nostalgia 1923 T-Bucket Frame Kit
    x
                

    The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link) 

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Mustang II IFS w/ New Stock Control Arms, Springs, Shocks, and Spindles
    Mustang II IFS w/ New Stock Control Arms, Springs, Shocks, and Spindles
    x
                Please view the product's page for more information
            
  • Chrome Cross Steering Tie Rod End, 11/16-18 LH Threads
    Chrome Cross Steering Tie Rod End, 11/16-18 LH Threads
    x
                

    Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.)

    • Not for use with flat steering arms
    • Use only with Ford type steering arms with a tapered hole
    • Not normally used with Chevy spindles

    Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

  • Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, steel 2" dropped spindles, Rubber Brake Lines, Carrera coil-over shock & spring, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • Carrera coil-over shock & spring
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (

Goto Previous PagePrevious Page
1 2 3 4