Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"lightweight pumps pump" Page 1 of 2

  • Small Block Chevy Aluminum Double Upper Pulley, Short Pump
    Small Block Chevy Aluminum Double Upper Pulley, Short Pump
    x
                Cast aluminum double groove V-belt pulley for '55-'68 Small Block Chevy short style water pumps. Fits over 5/8" water pump snout, but can be drilled out to 3/4" if needed. 
    • Precision machined aluminum construction
    • Lightweight and strong
    • Double grooves for two V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    x
                

    Cast aluminum 3-groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Three grooves for 3 V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Moroso 65750 Lightweight Fuel Pump Pushrod
    Moroso 65750 Lightweight Fuel Pump Pushrod
    x
                

    This lightweight fuel pump push rod helps prevent fuel pump arm float at high RPM and subsequent fuel starvation. Fits both Small Block Chevy (SBC) and Big Block Chevy (BBC).

    • For use in Drag, Oval Track and Street-Performance applications

     

  • Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11140 Instructions (PDF)

  • Aeromotive 11142 340 Stealth Fuel Pump, Offset Inlet and Outlet
    Aeromotive 11142 340 Stealth Fuel Pump, Offset Inlet and Outlet
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11142 Instructions (PDF)

  • Aeromotive 11141 340 Stealth Fuel Pump, Offset Inlet
    Aeromotive 11141 340 Stealth Fuel Pump, Offset Inlet
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11141 Instructions (PDF)

  • Garage Sale -  Small Block Chevy Cast Alum. Short Pump Double Gro
    Garage Sale - Small Block Chevy Cast Alum. Short Pump Double Gro
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 910-15482
      • 6-5/8" O.D.

    Available for Short style pumps ('55-'68). Fits a 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Aluminum Single Upper Pulley, Short Pump
    Small Block Chevy Aluminum Single Upper Pulley, Short Pump
    x
                

    Cast aluminum single groove V-belt upper pulley for '55-'68 Small Block Chevy short style water pumps. Fits over 5/8" water pump snout, but can be drilled out to 3/4" if needed.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • From inside at fan hub to back side of pulley is 2-3/4"
    • From back edge of pulley to center of V-belt groove is 5/16"
    • Fits over a 5/8" water pump shaft (can be drilled to 3/4" if needed)
    • Diameter is 6-5/8"

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Aluminum Double Lower Pulley, Short Pump
    Small Block Chevy Aluminum Double Lower Pulley, Short Pump
    x
                

    Cast aluminum double groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Double grooves for two V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Cast Alum. Short Pump Double Groove Lower Pulley
    Small Block Chevy Cast Alum. Short Pump Double Groove Lower Pulley
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 5-7/16" diameter

    Available for Short style pumps ('55-'68). Fits a 5/8" shaft.

    Note: The lower crank pulleys are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended. 

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • 1969-1985 Small Block Chevy Aluminum Double Lower Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Double Lower Pulley, Long Pump
    x
                

    Cast aluminum double groove V-belt crankshaft pulley for use with '69-'85 Small Block Chevy long style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Two grooves for V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Aluminum Single Lower Pulley, Short Pump
    Small Block Chevy Aluminum Single Lower Pulley, Short Pump
    x
                

    Cast aluminum single groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • This pulley has "0" offset and is flat against balancer
    • From edge of pulley to center of V-belt groove is 5/16"
    • Diameter is 6-5/8"

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

     

  • 1969-1985 Small Block Chevy Aluminum Single Upper Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Single Upper Pulley, Long Pump
    x
                

    Cast aluminum single groove V-belt upper pulley for '69-'85 Small Block Chevy long style water pumps. Fits over 5/8" water pump snout, but can be drilled out to 3/4" if needed.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • From inside of pulley at fan hub to rear edge of pulley is 2"
    • From rear edge of pulley to center of V-belt groove is 5/16"
    • Center hole fits a 5/8" shaft (can be drilled out to 3/4" if needed)
    • Diameter is 6-5/8"

    Note:  When using in conjunction with an electric fan assembly, be sure to consider the pulley installation screw kit # 910-15440 shown below.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Alum. Long Pump Double Groove Upper Pulley
    Small Block Chevy Alum. Long Pump Double Groove Upper Pulley
    x
                Cast aluminum double groove V-belt upper pulley for '69-'85 Small  Block Chevy long style water pumps. Fits over 5/8" water pump snout, but can be  drilled out to 3/4" if needed. 
    • Precision machined aluminum construction
    • Lightweight and strong
    • Two grooves for V-belts
    • Hub surface to first groove center: 2.415"
    • Center-to-center of grooves:  11/16"
    • Center hole fits a 5/8" shaft (can be drilled out to 3/4" if needed)
    • Diameter:  6-5/8"

    It may be necessary to shim either or both of the pulleys to achieve perfect belt alignment. There are variances between manufacturers of both water pumps and pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • AFCO 37380 Power Steering Pump w/ V-Pulley 1100#
    AFCO 37380 Power Steering Pump w/ V-Pulley 1100#
    x
                

    AFCO ported power steering pumps were developed with a matched pump volume and pressure to meet the requirements of today's gear box and rack and pinion steering systems.  We dyno-test each pump to ensure its quality. 

    • Correct pressure (6AN) & return (10AN) fittings installed
    • 100% pressure-tested
    • Plated Body
    • Lightweight pulley design
    • Popular racing design
    • Available in 1100# pressure
    • 6" V-Pulley

     

  • AFCO 37382 Power Steering Pump Without Pulley 1100#
    AFCO 37382 Power Steering Pump Without Pulley 1100#
    x
                

    AFCO ported power steering pumps were developed with a matched pump volume and pressure to meet the requirements of today's gear box and rack and pinion steering systems.  We dyno-test each pump to ensure its quality. 

    • Correct pressure (6AN) & return (10AN) fittings installed
    • 100% pressure-tested
    • Plated Body
    • Lightweight pulley design
    • Popular racing design
    • Available in 1100# pressure

     

  • 1969-1985 Small Block Chevy Aluminum Triple Lower Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Triple Lower Pulley, Long Pump
    x
                

    Cast aluminum triple groove V-belt crankshaft pulley for use with '69-'85 Small Block Chevy long style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Three grooves for V-belts
    • Mounting face to first groove:  1.090"
    • First groove to second groove:  .625"
    • Second groove to third groove:  .687"
    • Overall Thickness:  2.77"
    • Diameter:  6-5/8"
  • 1969-1985 Small Block Chevy Aluminum Single Lower Pulley, Long Pump
    1969-1985 Small Block Chevy Aluminum Single Lower Pulley, Long Pump
    x
                

    Cast aluminum single groove V-belt crankshaft pulley for use with '69-'85 Small Block Chevy long style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • From balancer to outer edge of pulley is 2-3/4"
    • From outer edge to center of V-belt groove is 5/16"
    • Diameter is 6-5/8"
  • Small Block Chevy Electric Water Pump
    Small Block Chevy Electric Water Pump
    x
                

    Small Block Chevy Electric Racing Water Pumps feature a specially machined housing to maximize flow. The lightweight aluminum assembly is flow-rated at 35+ gallons per minute and weighs less than 6 lbs. Pump draws 6-7 amps.

    • Joints feature “O” ring gaskets for a perfect seal
    • Black powdercoat finish
    • Includes mounting hardware and wiring pig tail
    • Lenth of aluminum inlet 3.75" (1.00" of which is threaded 3/4")
    • Outlet holes: 1.00" ID
    • Block mount center to center: 1.80"
    • From pump bottom to mounting surface: 1.50"
    • From top of outlet shoulder to mounting surface: 3.5"
    • Diameter of the pump: 4.00"
    • Lenth outside to outside shoulders: 10.00"
    • 10.00" of wiring off the pump, 5.00" off pigtail

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Small Block Chevy Aluminum Water Pump, Long
    Small Block Chevy Aluminum Water Pump, Long
    x
                

    Lightweight aluminum long style pump for S/B Chevy. Has provisions for your power steering mount.

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM.

    910-15590 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Low-drag impeller adds 14HP @ 7,500 RPM 
    • Includes integral cam stop boss
    • Overall length of 5.603" from rear mounting face to hub face  

    Fits 1955-1968 “Short” design 5/8" shaft S/B Chevy appliactions. Note: Pump will not clear a billet 910-11040 timing cover.

    545-63500 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • Hilborn Fuel Injection F1200-12/149 -12 AN Short Fuel Filter
    Hilborn Fuel Injection F1200-12/149 -12 AN Short Fuel Filter
    x
                

    A small, lightweight, in-line fuel filter that weighs under 7 ounces. It will handle flows through Hilborn's #1 size fuel pump. The stainless steel element can be cleaned and never needs replacement.  149 micron for mechanical injection applications. 

    Short body filters with stainless steel elements. AN 12 size is for before the pump. AN 6 size goes after the pump to protect the nozzles.

    Fuel Filter Configuration

    AN Thread Sizing Guide

     

  • B/B Chevy 396-454 Electric Water Pumps
    B/B Chevy 396-454 Electric Water Pumps
    x
                

    Electric Racing Water Pumps feature a specially machined housing to maximize flow. The lightweight aluminum assembly is flow-rated at 35+ gallons per minute and weighs less than 7 lbs. Pump draws 6-7 amps.

    • Joints feature “O” ring gaskets for a perfect seal
    • Black powdercoat finish
    • Includes mounting hardware and wiring pig tail
    • Length of aluminum inlet 3.375" (.75" of which is threaded 3/4")
    • Block mount center to center: 2.30"
    • From pump bottom to mounting surface: 1.625"
    • From top of outlet shoulder to mounting surface: 3.625"
    • Diameter of the pump: 4.00"
    • Length outside to outside shoulders: 11.75"
    • 10.00" of wiring off the pump, 5.00" off pigtail
  • Chevy Fuel Pump Push Rod for Roller Cams
    Chevy Fuel Pump Push Rod for Roller Cams
    x
                

    These lightweight fuel pump pushrods are specifically for use with 8620 and 9310 steel billet roller and slot hardfaced camshafts. One end of the pushrod has a bronze tip to bear against the fuel pump eccentric on the camshaft, eliminating the wear problems that occur when using a standard fuel pump pushrod (especially in endurance type applications).

    • Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990)
    • Heat treated tubular steel construction
    • Centerless ground for concentricity
    • Much lighter than solid steel O.E. type pushrods

     

     

  • Carter M60565 2.3 Ford Gas Fuel Pump
    Carter M60565 2.3 Ford Gas Fuel Pump
    x
                

    This high volume fuel pump for the 2.3L Ford 4 cylinder engine has all the desireable features you would want in a racing mechanical fuel pump. Delivers 4-1/2 to 6-1/2 psi with a 40 gph flow rating. Compatible with GASOLINE only. Has ¼ npt ports for both inlet and outlet.

    • Heavy-duty diaphragm
    • High-speed “anti-float” springs
    • Large “full-flow” valves
    • Lightweight, all-aluminum castings
    • Tough, heat-treated lever
  • Small Block Ford 302-351W Electric Water Pumps
    Small Block Ford 302-351W Electric Water Pumps
    x
                

    Small Block Ford Electric Racing Water Pumps feature a specially machined housing to maximize flow. The lightweight aluminum assembly is flow-rated at 35+ gallons per minute and weighs less than 6 lbs. Pump draws 6-7 amps.

    • Joints feature “O” ring gaskets for a perfect seal
    • Black powdercoat finish
    • Includes mounting hardware and wiring pig tail
    • Length of aluminum inlet 3.375" (.75" of which is threaded 3/4")
    • Plate mount center to center: 2.00"
    • From pump bottom to mounting surface: 1.50"
    • From top of outlet shoulder to mounting surface: 3.25"
    • Diameter of the pump: 4.00"
    • Length outside to outside shoulders: 10.125"
    • 10.00" of wiring off the pump, 5.00" off pigtail
    • Plate thickness .15"
  • AFCO 37390 Aluminum Power Steering Pump w/ Pulley & Reservoir
    AFCO 37390 Aluminum Power Steering Pump w/ Pulley & Reservoir
    x
                

    These new power steering pumps feature an aluminum housing with an integral reservoir.  This lightweight assembly eliminates the additional lines normally required to get from the pump to a remote reservoir.  These pumps are fully ported and 100% flow tested.

    • Correct pressure (6AN) and return (6AN) fittings installed
    • 100% pressure tested
    • Vented cap
    • Popular racing design
    • Saves 4 lbs over remote reservoir systems

     

  • Small Block Chevy Cast Alum. Long Pump Double Groove Lower Pulley
    Small Block Chevy Cast Alum. Long Pump Double Groove Lower Pulley
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    This is a 25% reduction pulley when used with the correct upper pulley, part number 91015476.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 910-15488
      • 5-7/16" O.D.

    Available for long water pumps. 5/8" shaft.

    Note: The lower crank pulleys are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended. 

     

  • Walbro GSL392 Inline Racing Fuel Pump
    Walbro GSL392 Inline Racing Fuel Pump
    x
                These aluminum racing Walbro GL392 inline fuel pumps feature a 255 LPH free flow rate and 60 psi maximum pressure.  They have a lightweight, compact design for durability and simplicity.
    • Overall Length: 6.44"
    • Outside Diameter: 1.70"
    • Aluminum material
    • Natural finish
    • 255 LPH free flow rate
    • 60 psi maximum pressure
    • 10mm X 1.0 inlet size
    • One inlet, female threads
    • 10mm X 1.0 outlet size
    • One outlet, female threads
    • Lightweight, compact design
    • Hardware NOT included

    Be sure to include our hardware installation kit and AN 8 fitting for these Walbro GL392 inline fuel pumps before purchasing. (960929 and 9603040)

  • Moroso 64060 Chevy Short Pump Double Groove Crank Pulley
    Moroso 64060 Chevy Short Pump Double Groove Crank Pulley
    x
                S/B Chevy, double groove cast aluminum lower pulley, 25% reduction. Available for short water pumps. 5/8" shaft.
    • Precision machined from high grade, lightweight aluminum castings
    • Extra-deep belt grooves provide added belt retention during rapid changes in engine RPM
    • Small pulley diameter slows fan, water pump, and alternator speed to reduce horsepower-robbing drag
    • High RPM water pump operation is improved, reducing impeller speed below cavitation threshold
    • 5-3/8" diameter
  • Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs

    Includes 12550 chromoly intermediate shaft, stud kit and +10# and -10# relief springs.

  • Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in. 

    Includes 12550 chrome moly intermediate shaft, stud kit and +10# and -10# relief springs.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs
  • Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    x
                

    Carter Super mechanical pumps contain heavy-duty diaphragms, high speed anti-float springs, large full flow valves, lightweight all-aluminum castings and a tough, heat-treated lever. The fittings are installed at the factory, not welded on like many competitors. Plus, they are made of steel to resist damage from cross threading.

    • AN 10 inlet fitting, AN 8 outlet fitting
    • Rated 172 GPH flow
    • 6-8 PSI (no regulator required)
    • Viton check valves
    • SOTO diaphrams
    • Gas only! Not for use with alcohol
  • Moroso 63520 Big Block Chevy Aluminum Short Water Pump
    Moroso 63520 Big Block Chevy Aluminum Short Water Pump
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Prevents localized boiling, detonation, head warping and cracking
    • Overall length of 5.80" from rear mounting face to hub face

    Fits 1965-68 "Short" design 5/8" shaft B/B Chevy applications.

     

    545-63520 Instructions (PDF)

  • AFCO 37391 Aluminum Power Steering Pump W/ Reservoir, No Pulley
    AFCO 37391 Aluminum Power Steering Pump W/ Reservoir, No Pulley
    x
                

    These new power steering pumps feature an aluminum housing with an integral reservoir.  This lightweight assembly eliminates the additional lines normally required to get from the pump to a remote reservoir.  These pumps are fully ported and 100% flow tested.

    • Correct pressure (6AN) and return (6AN) fittings installed
    • 100% pressure tested
    • Vented cap
    • Popular racing design
    • Saves 4 lbs over remote reservoir systems

     

  • Racing Power Steering Pump Mount
    $44.99
    $49.99
    Racing Power Steering Pump Mount
    x
                

    These racing power steering pump mounts are ultra-light and slotted to be used with standard and raised cam engines.  These mounts eliminate the need for different mounts when you have different block designs. They feature 2 horizontally mounting tabs.

    • Light Weight
    • 2 horizontally mounting tabs
    • Works with raised or standard camshafts
  • AFCO 37384 Power Steering Pump Replacement 6 Inch V-Pulley Only
    AFCO 37384 Power Steering Pump Replacement 6 Inch V-Pulley Only
    x
                

    AFCO Power Steering Pump Replacement 6 Inch V-Pulley Only

    • Lightweight pulley design

     

  • AFCO 37191 Small Block Chevy Power Steering Pump Mount-Bolts to Block
    AFCO 37191 Small Block Chevy Power Steering Pump Mount-Bolts to Block
    x
                
    • CNC-machined lightweight aluminum
    • Mounts racing type power steering pumps
    • Fits Small Block Chevy V8
  • AFCO 37190 Small Block Chevy Power Steering Pump Mount (Bolts to Head)
    AFCO 37190 Small Block Chevy Power Steering Pump Mount (Bolts to Head)
    x
                
    • CNC-machined lightweight aluminum
    • Mounts racing type power steering pumps
    • Fits Small Block Chevy V8
  • Carter M4891 Small Block Chevy 120 GPH Mechanical Fuel Pump
    Carter M4891 Small Block Chevy 120 GPH Mechanical Fuel Pump
    x
                

    These Super Street Racing mechanical fuel pumps from Carter feature high speed anti-float springs, a heavy duty diaphragm with special springs and rugged lightweight aluminum castings. It also has large, full-flow valves and a tough heat-treated lever.

    • For gasoline only
    • 8 PSI shutoff
    • High speed anti-float springs
    • Heavy duty diaphragm w/ special springs
    • Rugged lightweight aluminum castings
    • Large full-flow valves
    • Tough heat-treated lever arm
    • Has 1/4" NPT inlet & outlet
Goto Previous PagePrevious Page
1 2