Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"lens led taillight" Page 1 of 3

  • 1941-1948 Chevy LED Tail Light Conversion Lens
    1941-1948 Chevy LED Tail Light Conversion Lens
    x
                

    These direct replacement lenses will convert your 1941-1948 Chevy passenger car tail lights to powerful and bright LED lights.

    • 39 Super Bright Red LED's
    • Polycarbonate Lens
    • 1157 plug
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems

     

    1941-1948 Chevy LED Tail Light Conversion Instructions (pdf)

  • 1938-1939 Ford LED Conversion Stop/Tail Light Lens
    1938-1939 Ford LED Conversion Stop/Tail Light Lens
    x
                

    Lens with a built-in LED cluster for 1938-1939 Ford taillight. Red lens only - no bezel. Plugs into existing taillight housing socket.

    • 47 Super Bright Red LEDs, Complete with Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards are Designed for 7.7 - 14.0 VDC
    • DOT/SAE Certified

    911-37012 Instructions (pdf)

  • 1950 Pontiac LED Tail Light Conversion Lens
    1950 Pontiac LED Tail Light Conversion Lens
    x
                

    This LED tail light conversion kit converts your 1950 Pontiac tail, stop, and turn signal lights into very bright and visible LED's. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac tail light housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

    Kit Contents:

    • (2) LED arrays
    • (4) solderless connectors
    • (2) LED to car electrical harness
    • Installation instructions

    The red wire is for stop light/turn signal. The black wire is for the tail light.

    1950 Pontiac LED Tail Light Conversion Instructions (PDF)

  • 1942-1948 Ford LED Tail Light Conversion Lens
    1942-1948 Ford LED Tail Light Conversion Lens
    x
                

    These direct replacement tail light lenses will convert your 1942-1948 Ford tail lights to powerful and bright LED lights. This unit is very easy to connect as it simply plugs in where the taillight bulb used to be.
     

    • 40 Super Bright Red LED's
    • Epoxy coated, fully sealed electronics
    • Polycarbonate Lens
    • 1157 plug
    • Solid state circuit board for 12V systems
    • Lens portion that protrudes through the bezel (not included) is 4 1/8" x 1 7/8"
  • 1937-1938 Chevy LED Tail Light Conversion Lens
    1937-1938 Chevy LED Tail Light Conversion Lens
    x
                

    These direct replacement lenses will convert your 1937-1938 Chevy passenger car tail lights to powerful and bright LED lights. Although listed as a 1937-1938 Chevy, this taillight is very universal.

    • 45 Super Bright Red LED's
    • Polycarbonate Lens
    • Drivers side (Left side) includes a 6 LED White License Light
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems


    911-37011-R Instructions (pdf)

    911-37011-L Instructions (pdf)

  • 1953 Chevy Red LED Tail Light Lens
    1953 Chevy Red LED Tail Light Lens
    x
                These red polycarbonate tail light lens for 1953 Chevy passenger cars feature 26 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing tail light lens.
    • Red polycarbonate lens with 26 super bright red LEDs
    • Epoxy coated
    • Fully sealed electronics
    • Upper Outer Tail Lens
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1949-1950 Chevy Red LED Tail Light Lens
    1949-1950 Chevy Red LED Tail Light Lens
    x
                These red polycarbonate tail light lens for 1949-1950 Chevy passenger cars feature 16 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing taillight lens.
    • Red polycarbonate lens with 16 super bright red LED's
    • Epoxy coated
    • Fully sealed electronics
    • 1157 style plug for easy installation
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1959 Impala LED Tail Lights - Retrofit - No Lens
    1959 Impala LED Tail Lights - Retrofit - No Lens
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions.

    • 98 Super Bright LEDS
    • Circuit Board Only to Retrofit Existing Lens
    • Epoxy Coate
    • Fully Sealed Electronics
    • 1157 Plug
    • Solid State Circuit Boards designed for 7.7 - 14.0 VDC
  • 1949-1950 Chevy LED Tail Light Reflector Lens
    1949-1950 Chevy LED Tail Light Reflector Lens
    x
                These reflector lens for tail light assembly fit all original 1949-1950 Chevy passenger cars. They feature 5 super bright red LED's and are a conversion replacement for your old damaged or missing tail light reflector lens.
    • Red polycarbonate reflector lens with 5 super bright red LEDs
    • Fits all original 1949-1950 Chevy tail lamps
    • Easy Hook Up
    • 12 Volt only
  • 1959 Impala LED Tail Light Lenses
    1959 Impala LED Tail Light Lenses
    x
                Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 
            
  • 1954 Chevy Red LED Upper Tail Light Lens
    1954 Chevy Red LED Upper Tail Light Lens
    x
                These red polycarbonate tail light lens for 1954 Chevy passenger cars feature original style lens pattering.  They fit the factory housing and are a conversion replacement for your old damaged or missing taillight lens.
    • Red polycarbonate lens with 40 super bright red LED's
    • Upper lens
    • Epoxy coated
    • Fully sealed electronics
    • 1157 style plug for easy installation
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1955-1959 Chevy Stepside Pickup LED Tail Light Conversion Lens
    1955-1959 Chevy Stepside Pickup LED Tail Light Conversion Lens
    x
                

    Convert your 1955-1959 Chevy Pickup Truck's dim tail lights to powerful LED light. Kit converts your housing to LED by simply replacing the lens and plugging into the 1157 socket. For 12V systems.

    • 41 Super Bright Red LEDs
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics
    • 1157 socket
    Works with Chevy Step side trucks.  Does NOT work with a Fleetside truck.
  • 1953 Chevy LED Tail Light/Stop Light
    1953 Chevy LED Tail Light/Stop Light
    x
                These red polycarbonate tail light lens for 1953 Chevy passenger cars feature 40 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing tail light lens.
    • Red polycarbonate lens with 40 super bright red LED's
    • Epoxy coated
    • Fully sealed electronics
    • Center Tail Lens 
    • Stop/Tail/Turn Function
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1939 Chevy LED Taillight Assembly
    From: $59.99
    New
    1939 Chevy LED Taillight Assembly
    x
                

    These complete taillight assemblies are the perfect replacement for 1939 Chevy passenger cars and pickups. They feature LED lenses with your choice of a chrome housing or with a primered housing ready for paint.  

    • Original replacements
    • 1939 Chevy passenger car and pickup
    • Complete assemblies feature steel housing
    • Red plastic lens with 17 red lens on LED version
    • Choose Left Hand/Driver Side or Right Hand/Passenger Side
    • Choose chrome or primered housing
    • Sold each
  • 1951-1952 Chevy Red LED Lens / Tail Light
    1951-1952 Chevy Red LED Lens / Tail Light
    x
                These red polycarbonate tail light lens for 1951-1952 Chevy passenger cars feature 16 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing tail light lens.
    • Red polycarbonate lens with 16 super bright red LEDs
    • Epoxy coated
    • Fully sealed electronics
    • 1157 style plug for easy installation
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1951-1952 Chevy LED Tail Light Assembly
    1951-1952 Chevy LED Tail Light Assembly
    x
                These completely assembled tail light bezels are for 1951-1952 Chevy passenger cars. They feature a red polycarbonate lens with 16 super bright red LED's. These tail light assemblies are a conversion replacement for your old damaged or missing tail lights. 
    • Red Polycarbonate Lens with 16 Super Bright Red LED's
    • Chrome Zinc Die Cast Bezel with red reflector
    • Epoxy Coated, Fully Sealed Electronics 
    • Fits All Passenger Cars
    • Left or Right side
    • Includes Chrome Housing, Mounting Hardware, Round Reflector, Socket and Wires
    • 12V only
  • 1932 Ford Tail Light LED Conversion Lens
    1932 Ford Tail Light LED Conversion Lens
    x
                These direct replacement tail light lenses will convert your 1932 Ford Deuce tail lights to powerful and bright LED lights. Choose left or right sides.
    • 17 Super Bright Red LEDs
    • Drivers side (Left side) includes a 4 LED White License Light (primary picture)
    • Epoxy coated, fully sealed electronics
    • Two 1156 plugs
    • Solid state circuit board for 12V systems 
    1932 Ford LED Tail Light Conversion Instructions (pdf)
  • Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    x
                

    Hagan has made it simple to add a set of flush mount '39 Ford style LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 1/4" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1928-1931 Ford Model A LED Tail Light Conversion Lens
    1928-1931 Ford Model A LED Tail Light Conversion Lens
    x
                These direct replacement tail light lenses will convert your Model A taillights to powerful and bright LED lights. Choose left or right sides.
    • 19 Super Bright Red LEDs
    • Drivers side (Left side) includes a 4 LED White License Light (pictured)
    • Epoxy coated, fully sealed electronics
    • Two 1156 plugs
    • Solid state circuit board for 12V systems 

    1928-1931 LED Tail Light Conversion Instructions (pdf)

  • 1940-1953 Chevy Truck LED Tail Lights
    1940-1953 Chevy Truck LED Tail Lights
    x
                

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • LED Cat Eye Tail Light
    $39.99
    Product Rating: 4.80 Stars
    LED Cat Eye Tail Light
    x
                

    This 12-volt, 12-LED tail light can be used as a stop/turn/tail or just use as a third stop light. Measures 7.25" long x 1-50" tall x .730" thick with a chrome bezel. Light is flat on the back side and comes with a mounting gasket.

    10-32 mounting bolts (not) included.

    LED Cat Eye Tail Light Installation Instructions (PDF) 

  • 1928-1931 Ford Model A LED Tail Light
    1928-1931 Ford Model A LED Tail Light
    x
                

    Made of polished stainless steel with glass lens. This LED tail light is an excellent replacement or addition to your 1928-1931 Model 'A'. Choose right or left.

    • 19 Super Bright Red LED's
    • Drivers side (Left side) includes a 4 LED White License Light
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems 

    1928-1931 Tail Light Installation Instructions (pdf)

  • 1939 Chevy LED Taillight Lens
    $24.99
    $29.99
    New
    1939 Chevy LED Taillight Lens
    x
                These red LED tail light lenses are replacements for your 1939  Chevy   passenger car.  
    • Original replacements
    • 1939 Chevy passenger car
    • Red plastic lens with 17 red LEDs
    • Sold each
    • 2-5/8" in diameter
    • 3/4" deep
    • Bezel is 1"
  • 1938-39 Ford Red LED Tail-Stop Lights
    1938-39 Ford Red LED Tail-Stop Lights
    x
                

    Each of these complete 1938-39 Ford LED taillights are optimized for visibility and proper fit on the car. Taillights include a pressure cast polished stainless bezel, glass lens, and stainless steel hardware.

    • 28 super-bright LEDs
    • Glass lens
    • Epoxy coated, fully-sealed electronics
    • Stainless steel rim and black housing 

    911-37014 Instructions (PDF)

  • 1937 Ford LED Tail Light Lens Conversion
    1937 Ford LED Tail Light Lens Conversion
    x
                

    LED conversion kit for your 1937 Ford passenger car tail light housings. Choose left or right side.

    • 17 Super Bright Red LEDs
    • Polycarbonate Lens
    • Drivers side (Left side, in primary picture) includes a 6 LED White License Plate Light
    • Epoxy coated, fully sealed electronics
    • 1157 plug
    • Solid state circuit boards designed for 7.7 - 14.0 VDC 
  • Hagan Street Rods fm6DSR-LEDH Flush Mount 6 Inch LED Tail Lights Red Dual
    Hagan Street Rods fm6DSR-LEDH Flush Mount 6 Inch LED Tail Lights Red Dual
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 0.5" x 0.25" thick
    • Lenses are spaced 0.5" apart
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Delta 01-1159-SMDA Euro 7 Inch Headlights w/ Xenon Bulb/LED Blinkers
    Delta 01-1159-SMDA Euro 7 Inch Headlights w/ Xenon Bulb/LED Blinkers
    x
                

    This DOT photometrically perfect European optics will outperform any stock headlights 4 to1. The headlights feature lead-crystal prismatic glass lens, vacuum metalized steel reflectors and silicone boot with vents to seal from dust and moisture.

    • Lens color: Clear
    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Lens Material: Lead Crystal
    • Size: 7"
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
      • Built-in high output LED turn signals
      • Hi/Lo Beam
  • 1940 Ford LED Tail Lights
    $119.99
    1940 Ford LED Tail Lights
    x
                

    Complete tail light assembly with very bright and visible LED's for the stop, tail, and turn signal functions. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This led taillight is designed to bolt into a 1940 Ford fender in place of the original taillight.

    Kit Contents: (2) LED complete taillamp assemblies, (4) solderless connectors, (2) LED to car electrical harness, (2) custom molded taillamp to body seal, installation instructions.

    • Bezel re-shaped to fit tightly to fender
    • External screw hole eliminated for cleaner look
    • 14 high intensity LED's per lamp 
    • Rust-proof composite taillamp bucket
    • Stainless steel studs, nuts, and washers
    • Acrylic lens
    • Dual built-in reflectors for lights off safety
    • Chromed plastic bezel
    • Taillamp-to-body gasket seal

    1940 Ford Tail Light Installation Instructions (PDF) 

  • Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    x
                

    These beautiful LED tail lights are carved out of a solid billet of 6061-T6 aluminum and then chrome plated. They only protrude 3/16".

    • Bright LED lights for safety and function
    • Integrated design with 3 functions: tail, turn & brakes
    • Extremely bright LED's, generate virtually no heat, use little power and have long life
    • Fully assembled for easy installation
    • Detailed instructions with color coded wiring for easy installation
    • Oval style with smooth recessed lens and internal prism
    • Design matches other Lokar Oval style products
    • Stainless hardware and zinc plated mounting brackets

    Lokar LED Tail Light Installation Instructions (PDF)

  • 1937-1938 Chevy LED Tail Light Assembly
    1937-1938 Chevy LED Tail Light Assembly
    x
                

    Use these brilliant polished stainless steel LED tail lights to upgrade your 1937-1938 Stovebolt or hang 'em on the back of a T-bucket for a different look! Choose left or right.

    • 45 super bright red LED's
    • Polycarbonate lens
    • Polished stainless steel housing
    • For 12V systems
    • Left-side taillight has licence plate light

    This taillight works best with a 1937-38 mount bracket. If you desire a universal-mount light, 91137013 pickup housings have an almost flat back for ease of mounting.

    1937-1938 Chevy Tail Light Installation Instructions (PDF)

  • 1941-1948 Chevy LED Tail Light Assembly
    1941-1948 Chevy LED Tail Light Assembly
    x
                

    These powerful bright red LED tail lights are an excellent replacement or addition to your 1941-1948 Chevy passenger car.

    • 39 Super Bright Red LED's
    • Polycarbonate Lens
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems
     

    1941-1948 Chevy LED Tail Light Installation Instructions (pdf)

  • Billet Aluminum LED Third Brake Light
    Billet Aluminum LED Third Brake Light
    x
                Wire this third brake light in conjunction with tail lights. Billet aluminum with red lens. 

    This LED third brake light is 2" tall and 7" wide. There is one wire coming through the base for power. A ground wire would be attached to the bottom of the mounting bolts at the base.


  • LED 7 Inch Headlamp Bulb
    $289.99
    LED 7 Inch Headlamp Bulb
    x
                

    Tested by our troops in Iraq, these headlights have proven to be efficient, rugged and bright. They are the common 7" diameter and will fit most applications that use the 6014 style bulb. The lens does extend out approximately 1" farther than the original so check for clearance issues. These are the latest technology in headlights and is that cure for the 'I can't see at night' blues.

    • DOT Approved, High Beam and Low Beam performance
    • Provides light output closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility
    • Solid-state design resists damage from shock & vibration
    • Offers as much as 50x longer life (10,000 hrs vs 400 hrs) than comparable incandescent lamps, saving the time and expense of replacing lamps multiple times
    • Hard wired design, fully encapsulated electronics & anodized aluminum housing protect from damage caused by corrosive elements
    • Impact resistant polycarbonate lens protected against damage caused by debris and other hazards
    • Direct replacement for Par 56, H6014 and H6024 lamps
    • Sold each, two required.

    911-27250 Instructions (PDF)

  • Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 15 super bright red LED's
    • Lens is 1/2" by 4"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 30 super bright red LED's
    • Lens is 1/2" by 8"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 20 super bright red LED's
    • Lens is 1/2" by 6"
    • Comes with T bolts to hold housing in place
  • 1937 Ford LED Tail Light Assembly
    1937 Ford LED Tail Light Assembly
    x
                

    Authentic reproduction of the 1937 Ford passenger car tail light housing complete with modern LED lens. Black painted housing. Choose left or right side.

    • 17 Super Bright Red LEDs
    • Polycarbonate Lens
    • Drivers side (Left) includes a 6 LED White License Plate Light
    • Solid state circuit boards designed for 7.7 - 14.0 VDC 
  • 1964-66 Mustang LED Tail Lights
    1964-66 Mustang LED Tail Lights
    x
                

    Face it, it's hard to see those tail and brake lights on older Mustangs. Now is the time to change out those broken or faded lights for new LED versions. 

    • 68 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1967 Chevelle LED Tail Light
    $34.99
    Product Rating: 5.00 Stars
    1967 Chevelle LED Tail Light
    x
                

    Face it, it's hard to see those tail and brake lights on older cars. Now is the time to change out those broken or faded lights for new LED versions.

    • 68 Super Bright LEDs, complete with Polycarbonate lens
    • Epoxy coated, fully sealed electronics, 1157 plug
    • Solid state circuit board designed for 7.7 - 14.0 VDC
  • Hagan Street Rods fm4DSR-LEDH Flush Mount 4 Inch Tail Lights Red Dual
    Hagan Street Rods fm4DSR-LEDH Flush Mount 4 Inch Tail Lights Red Dual
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Lenses are spaced 0.5" apart
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

Goto Previous PagePrevious Page
1 2 3