Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"led tail light" Page 1 of 4

  • Sequential LED Tail Light Kit
    Sequential LED Tail Light Kit
    x
                
    • Convert any three LED tail lights to sequential operation
    • Also upgrades Speedway Motors brand 1969 Camaro and 1967-'69 Mustang LED tail lights to three sequence
    • Three segment sequence with "all-at-once" brake light
    • Kit includes two modules, wires, connectors and instructions

    Sequential LED Tail Light Wiring Instructions (PDF)

  • LED 1157 Tail Light Bulb, 1 Inch, Red
    LED 1157 Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

     

  • LED Cat Eye Tail Light
    $39.99
    Product Rating: 4.80 Stars
    LED Cat Eye Tail Light
    x
                

    This 12-volt, 12-LED tail light can be used as a stop/turn/tail or just use as a third stop light. Measures 7.25" long x 1-50" tall x .730" thick with a chrome bezel. Light is flat on the back side and comes with a mounting gasket.

    10-32 mounting bolts (not) included.

    LED Cat Eye Tail Light Installation Instructions (PDF) 

  • 1938-39 Ford Red LED Tail-Stop Lights
    1938-39 Ford Red LED Tail-Stop Lights
    x
                

    Each of these complete 1938-39 Ford LED taillights are optimized for visibility and proper fit on the car. Taillights include a pressure cast polished stainless bezel, glass lens, and stainless steel hardware.

    • 28 super-bright LEDs
    • Glass lens
    • Epoxy coated, fully-sealed electronics
    • Stainless steel rim and black housing 

    911-37014 Instructions (PDF)

  • 1941-1948 Chevy LED Tail Light Conversion Lens
    1941-1948 Chevy LED Tail Light Conversion Lens
    x
                

    These direct replacement lenses will convert your 1941-1948 Chevy passenger car tail lights to powerful and bright LED lights.

    • 39 Super Bright Red LED's
    • Polycarbonate Lens
    • 1157 plug
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems

     

    1941-1948 Chevy LED Tail Light Conversion Instructions (pdf)

  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • 1940-1953 Chevy Truck LED Tail Lights
    1940-1953 Chevy Truck LED Tail Lights
    x
                

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • Billet Aluminum LED Third Brake Light
    Billet Aluminum LED Third Brake Light
    x
                Wire this third brake light in conjunction with tail lights. Billet aluminum with red lens. 

    This LED third brake light is 2" tall and 7" wide. There is one wire coming through the base for power. A ground wire would be attached to the bottom of the mounting bolts at the base.


  • 1938-1939 Ford LED Conversion Stop/Tail Light Lens
    1938-1939 Ford LED Conversion Stop/Tail Light Lens
    x
                

    Lens with a built-in LED cluster for 1938-1939 Ford taillight. Red lens only - no bezel. Plugs into existing taillight housing socket.

    • 47 Super Bright Red LEDs, Complete with Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards are Designed for 7.7 - 14.0 VDC
    • DOT/SAE Certified

    911-37012 Instructions (pdf)

  • 1928-1931 Ford Model A LED Tail Light
    1928-1931 Ford Model A LED Tail Light
    x
                

    Made of polished stainless steel with glass lens. This LED tail light is an excellent replacement or addition to your 1928-1931 Model 'A'. Choose right or left.

    • 19 Super Bright Red LED's
    • Drivers side (Left side) includes a 4 LED White License Light
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems 

    1928-1931 Tail Light Installation Instructions (pdf)

  • 1950 Pontiac LED Tail Light Conversion Lens
    1950 Pontiac LED Tail Light Conversion Lens
    x
                

    This LED tail light conversion kit converts your 1950 Pontiac tail, stop, and turn signal lights into very bright and visible LED's. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac tail light housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

    Kit Contents:

    • (2) LED arrays
    • (4) solderless connectors
    • (2) LED to car electrical harness
    • Installation instructions

    The red wire is for stop light/turn signal. The black wire is for the tail light.

    1950 Pontiac LED Tail Light Conversion Instructions (PDF)

  • Oval LED Tail Light
    $39.99
    Product Rating: 4.75 Stars
    Oval LED Tail Light
    x
                

    This 12-volt LED tail light has a stop/turn/tail and can be mounted on a flat surface. Measures 4-1/2" long x 2-9/16" tall.  Includes a rubber mounting gasket.

    Requires 10-32 mounting bolts (not included).

    LED Tail Light Installation Instructions (PDF) 

  • 1932 Ford LED Tail Light Assembly
    1932 Ford LED Tail Light Assembly
    x
                

    Polished stainless steel housing with powerful red LED tail lights. An excellent replacement or addition to your 1932 Ford Deuce. Choose right or left.

    • 17 super bright red LED's
    • 4" diameter
    • 3" deep
    • Drivers side (Left side) includes a 4 LED white license light
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems

    1932 Ford LED Tail Light Installation Instructions (PDF)

  • 1937-1938 Chevy LED Tail Light Assembly
    1937-1938 Chevy LED Tail Light Assembly
    x
                

    Use these brilliant polished stainless steel LED tail lights to upgrade your 1937-1938 Stovebolt or hang 'em on the back of a T-bucket for a different look! Choose left or right.

    • 45 super bright red LED's
    • Polycarbonate lens
    • Polished stainless steel housing
    • For 12V systems
    • Left-side taillight has licence plate light

    This taillight works best with a 1937-38 mount bracket. If you desire a universal-mount light, 91137013 pickup housings have an almost flat back for ease of mounting.

    1937-1938 Chevy Tail Light Installation Instructions (PDF)

  • 1955 Chevy LED Tail Light Conversion Kit
    1955 Chevy LED Tail Light Conversion Kit
    x
                The 1955 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED tail light conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1955 Chevy LED Tail Light Conversion Instructions (pdf)

  • Technostalgia 6046 1946-1948 Plymouth LED Tail Lights
    Technostalgia 6046 1946-1948 Plymouth LED Tail Lights
    x
                

    These LED tail lights are among the best you will find for your old Plymouth. They feature chrome plated die-cast metal housings with stainless steel mounting studs, nuts and washers. They are a direct replacement with the benefits of LED brightness (14 LED's per light). Simple, clear wiring directions (12 volt only) and includes wiring and even taillight-to-body gaskets.

    • Includes RapidFire brake lights function
    • Brake lights are pulsed rapidly three times within the first 1/2 second of pressing the brake pedal followed by constant ON
    • Cycle is repeated every time the brake pedal is pressed
    • This is a valuable safety feature, but can be overridden at time of installation

     

  • Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    x
                

    These beautiful LED tail lights are carved out of a solid billet of 6061-T6 aluminum and then chrome plated. They only protrude 3/16".

    • Bright LED lights for safety and function
    • Integrated design with 3 functions: tail, turn & brakes
    • Extremely bright LED's, generate virtually no heat, use little power and have long life
    • Fully assembled for easy installation
    • Detailed instructions with color coded wiring for easy installation
    • Oval style with smooth recessed lens and internal prism
    • Design matches other Lokar Oval style products
    • Stainless hardware and zinc plated mounting brackets

    Lokar LED Tail Light Installation Instructions (PDF)

  • 1940 Ford LED Tail Lights
    $119.99
    1940 Ford LED Tail Lights
    x
                

    Complete tail light assembly with very bright and visible LED's for the stop, tail, and turn signal functions. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This led taillight is designed to bolt into a 1940 Ford fender in place of the original taillight.

    Kit Contents: (2) LED complete taillamp assemblies, (4) solderless connectors, (2) LED to car electrical harness, (2) custom molded taillamp to body seal, installation instructions.

    • Bezel re-shaped to fit tightly to fender
    • External screw hole eliminated for cleaner look
    • 14 high intensity LED's per lamp 
    • Rust-proof composite taillamp bucket
    • Stainless steel studs, nuts, and washers
    • Acrylic lens
    • Dual built-in reflectors for lights off safety
    • Chromed plastic bezel
    • Taillamp-to-body gasket seal

    1940 Ford Tail Light Installation Instructions (PDF) 

  • 1937-1938 Chevy LED Tail Light Conversion Lens
    1937-1938 Chevy LED Tail Light Conversion Lens
    x
                

    These direct replacement lenses will convert your 1937-1938 Chevy passenger car tail lights to powerful and bright LED lights. Although listed as a 1937-1938 Chevy, this taillight is very universal.

    • 45 Super Bright Red LED's
    • Polycarbonate Lens
    • Drivers side (Left side) includes a 6 LED White License Light
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems


    911-37011-R Instructions (pdf)

    911-37011-L Instructions (pdf)

  • 1956 Chevy LED Tail Light Conversion Kit
    1956 Chevy LED Tail Light Conversion Kit
    x
                The 1956 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1956 Chevy LED Tail Light Conversion Instructions (pdf)

  • 1157 LED Tail Light Bulb, 1-3/4 Inch, Amber
    1157 LED Tail Light Bulb, 1-3/4 Inch, Amber
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are amber when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED taillights will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) 

  • 1156 LED Tail Light Bulb, 1 Inch, Red
    1156 LED Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) LED lights require so little “juice” that the conventional flasher can’t cope.

    These LED bulbs are made to serve as a conversion replacement for old damaged or missing original bulbs.  They essentially work the same but with greater quality and brighter, clearer light. They can be used as a running light, a brake light, or both.

    • 12 Volt Bulb
    • 1156 bulbs have the pins straight across and a single contact on the plug
    • Red when illuminated
    • 1" Diameter
    • Efficient and use such small amounts of power
    • Requires the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong)
  • 1957 Chevy LED Tail Light Conversion Kit
    1957 Chevy LED Tail Light Conversion Kit
    x
                The 1957 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1957 Chevy LED Tail Light Conversion Instructions (pdf)

  • 1953 Chevy LED Tail Light/Stop Light
    1953 Chevy LED Tail Light/Stop Light
    x
                These red polycarbonate tail light lens for 1953 Chevy passenger cars feature 40 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing tail light lens.
    • Red polycarbonate lens with 40 super bright red LED's
    • Epoxy coated
    • Fully sealed electronics
    • Center Tail Lens 
    • Stop/Tail/Turn Function
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1942-1948 Ford LED Tail Light Conversion Lens
    1942-1948 Ford LED Tail Light Conversion Lens
    x
                

    These direct replacement tail light lenses will convert your 1942-1948 Ford tail lights to powerful and bright LED lights. This unit is very easy to connect as it simply plugs in where the taillight bulb used to be.
     

    • 40 Super Bright Red LED's
    • Epoxy coated, fully sealed electronics
    • Polycarbonate Lens
    • 1157 plug
    • Solid state circuit board for 12V systems
    • Lens portion that protrudes through the bezel (not included) is 4 1/8" x 1 7/8"
  • 1941-1948 Chevy LED Tail Light Assembly
    1941-1948 Chevy LED Tail Light Assembly
    x
                

    These powerful bright red LED tail lights are an excellent replacement or addition to your 1941-1948 Chevy passenger car.

    • 39 Super Bright Red LED's
    • Polycarbonate Lens
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems
     

    1941-1948 Chevy LED Tail Light Installation Instructions (pdf)

  • Technostalgia 6043 1940 Chevy Car LED Tail Lights
    Technostalgia 6043 1940 Chevy Car LED Tail Lights
    x
                

    These powerful LED tail lights are a direct replacement for 1940 Chevy passenger cars. Features 14 LED's per tail light, a pressure cast bezel, a molded-in reflector for lights-off safety, and stainless steel hardware. 

  • 1968 Camaro LED Tail Light/Stop Lights
    1968 Camaro LED Tail Light/Stop Lights
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 68 Camaro Tail Light
    • 48 Super Bright LEDS
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1157 LED Tail Light Bulb, 1-3/4 Inch, Red
    1157 LED Tail Light Bulb, 1-3/4 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) 

  • 1958-60 Chevy, 1958-67 Corvette LED Tail/Stop Lights
    1958-60 Chevy, 1958-67 Corvette LED Tail/Stop Lights
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. Fits 1958-1960 Chevy fullsize car, 1958-1960 Corvette inner red, and 1961-67 Corvette tail light.

    • 13 Super Bright Red LEDs
    • Polycarbonate lenses
    • Epoxy Coated
    • Fully Sealed Electronics
    • 1157 Plugs
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC
  • Technostalgia 6064 1940-1941 Willys LED Tail Lights
    Technostalgia 6064 1940-1941 Willys LED Tail Lights
    x
                

    This is the perfect finishing touch for your 1940-1941 Willys coupe project. These beautiful tail lights have a cast bezel that is chrome plated and ultra bright LED's let everyone know if you are stopping. 

    1940-1941 Willys Tail Light Installation Instructions (pdf)

  • 1963 Impala LED Tail/Stop Lights
    1963 Impala LED Tail/Stop Lights
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1959 Impala LED Tail Lights - Retrofit - No Lens
    1959 Impala LED Tail Lights - Retrofit - No Lens
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions.

    • 98 Super Bright LEDS
    • Circuit Board Only to Retrofit Existing Lens
    • Epoxy Coate
    • Fully Sealed Electronics
    • 1157 Plug
    • Solid State Circuit Boards designed for 7.7 - 14.0 VDC
  • 1156 LED Tail Light Bulb, 1 Inch, Amber
    1156 LED Tail Light Bulb, 1 Inch, Amber
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are amber when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

  • 1951-1952 Chevy LED Tail Light Assembly
    1951-1952 Chevy LED Tail Light Assembly
    x
                These completely assembled tail light bezels are for 1951-1952 Chevy passenger cars. They feature a red polycarbonate lens with 16 super bright red LED's. These tail light assemblies are a conversion replacement for your old damaged or missing tail lights. 
    • Red Polycarbonate Lens with 16 Super Bright Red LED's
    • Chrome Zinc Die Cast Bezel with red reflector
    • Epoxy Coated, Fully Sealed Electronics 
    • Fits All Passenger Cars
    • Left or Right side
    • Includes Chrome Housing, Mounting Hardware, Round Reflector, Socket and Wires
    • 12V only
  • 1959 Impala LED Tail Light Lenses
    1959 Impala LED Tail Light Lenses
    x
                Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 
            
  • 1953 Chevy Red LED Tail Light Lens
    1953 Chevy Red LED Tail Light Lens
    x
                These red polycarbonate tail light lens for 1953 Chevy passenger cars feature 26 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing tail light lens.
    • Red polycarbonate lens with 26 super bright red LEDs
    • Epoxy coated
    • Fully sealed electronics
    • Upper Outer Tail Lens
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
  • 1937 Ford LED Tail Light Assembly
    1937 Ford LED Tail Light Assembly
    x
                

    Authentic reproduction of the 1937 Ford passenger car tail light housing complete with modern LED lens. Black painted housing. Choose left or right side.

    • 17 Super Bright Red LEDs
    • Polycarbonate Lens
    • Drivers side (Left) includes a 6 LED White License Plate Light
    • Solid state circuit boards designed for 7.7 - 14.0 VDC 
  • 1949-1950 Chevy LED Tail Light Reflector Lens
    1949-1950 Chevy LED Tail Light Reflector Lens
    x
                These reflector lens for tail light assembly fit all original 1949-1950 Chevy passenger cars. They feature 5 super bright red LED's and are a conversion replacement for your old damaged or missing tail light reflector lens.
    • Red polycarbonate reflector lens with 5 super bright red LEDs
    • Fits all original 1949-1950 Chevy tail lamps
    • Easy Hook Up
    • 12 Volt only
  • 1949-1950 Chevy Red LED Tail Light Lens
    1949-1950 Chevy Red LED Tail Light Lens
    x
                These red polycarbonate tail light lens for 1949-1950 Chevy passenger cars feature 16 super bright red LED's.  They fit the factory housing and are a conversion replacement for your old damaged or missing taillight lens.
    • Red polycarbonate lens with 16 super bright red LED's
    • Epoxy coated
    • Fully sealed electronics
    • 1157 style plug for easy installation
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • 12V only
Goto Previous PagePrevious Page
1 2 3 4