Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"kit oil pressure" Page 1 of 6

  • Classic Instruments SN57F Ford Oil Pressure Sender Bushing Kit Adaptor
    Classic Instruments SN57F Ford Oil Pressure Sender Bushing Kit Adaptor
    x
                Classic Instruments' brass angled-bushing kits allow for easy installation on most Ford engines. 

    The Oil Pressure Sender will not clear either the back of the intake manifold or the distributor body on many installations unless the Bushing Kit is used.

    • Bushing kit to install oil pressure sender
    • Ford applications
  • Braided Pressure Gauge Line Kit
    Braided Pressure Gauge Line Kit
    x
                This braided pressure gauge line kit makes it a snap to hook up your pressure gauge.  Can be used with oil, water, fuel or air. Includes AN 4 braided line,  AN4 to 1/8" NPT male and AN4 to 1/8" NPT female. Choose from lengths of  25", 36" or 48".
            
  • Best Gasket 1949-53 Ford Flathead Short Block Gasket Set
    Best Gasket 1949-53 Ford Flathead Short Block Gasket Set
    x
                

    BESTgasket is the world's premier manufacturer of gaskets for vintage and classic American cars and trucks.  These quality gasket sets are for use with 1949-53 Ford Flathead V-8 engines.

    Includes:

    • Oil pan gasket
    • Improved "rope" rear main seal
    • Drain plug gasket
    • Oil pump gasket
    • Oil pump idler cover gasket
    • Water pump gaskets
    • Front cover gasket
    • Distributor gasket
    • Fuel pump stand gasket
  • 401-425 Buick Nailhead Oil Pump Rebuild Kit
    401-425 Buick Nailhead Oil Pump Rebuild Kit
    x
                

    This oil pump rebuild kit fits '62-'66 401 and '63-'66 425 engines only.

  • Budget 40-Amp Relay Kit
    $9.99
    Product Rating: 4.63 Stars
    Budget 40-Amp Relay Kit
    x
                

    Use this handy 40 amp relay to wire up your 12 volt horn, electric fuel pump, electric fan with sensor, shaved door handles, or whatever! Contains relay, plug, wire, and instructions.

    The wiring would be as follows (included in kit instructions):

    • Red Wire #30 Prong = main 12V power source
    • Black Wire #85 Prong = Electric fan sensor OR low (oil) pressure switch OR grounding switch
    • Blue Wire #86 Prong = 12V toggle switch OR ignition switch "ACC" terminal
    • Yellow Wire #87 Prong = to fan or fuel pump + lead
    • White Wire or Center Prong = not normally used 

    Fan or Fuel Pump Relay Installation Instructions (PDF)

  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • 1966-67 Cadillac 429 Oil Pump Rebuild Kit
    1966-67 Cadillac 429 Oil Pump Rebuild Kit
    x
                

    These oil pump rebuild kits are for 1966-67 429 c.i. Cadillac engines.  They consist of quality parts, made to preserve the life of your oil pump.

    • Oil pump rebuild kit
    • Fits 1966-67 Cadillac engines:
      • 429 c.i.

     

  • 1954-58 Cadillac 331/365 Oil Pump Rebuild Kit
    1954-58 Cadillac 331/365 Oil Pump Rebuild Kit
    x
                These oil pump rebuild kits are for 1954-55 331 c.i. and 1956-58 365 c.i. Cadillac engines.  They consist of quality  parts, made to preserve the life of your oil pump.
    • Oil pump rebuild kit
    • Fits Cadillac V8 engines:
      • 1954-1955 331 c.i.
      • 1956-1958 365 c.i.
  • Stewart Warner 82323 Deluxe 2-2/16 Mech Oil Pressure Gauge, 5-100 PSI
    Stewart Warner 82323 Deluxe 2-2/16 Mech Oil Pressure Gauge, 5-100 PSI
    x
                

    These Deluxe Series 2-1/16" mechanical oil pressure gauges from Stewart Warner feature classic styling with modern accuracy.

    • Classic easy-to-read white graphics on black face dials with white pointers
    • Patented 12 volt light ring for night-time illumination
    • Low profile, polished stainless steel bezel and metal cases

    Oil line kit NOT included. Use kit listed.

    665-82323 Instructions (PDF)

  • 1959-60 Oldsmobile 371/394 Oil Pump Rebuild Kit
    1959-60 Oldsmobile 371/394 Oil Pump Rebuild Kit
    x
                

    These oil pump rebuild kits are for 1959-60 371 c.i. and 394 c.i. Oldsmobile engines.  They consist of quality parts, made to preserve the life of your oil pump.

    • Oil pump rebuild kit
    • Fits 1959-1960 Oldsmobile engines:
      • 371 c.i. and 394 c.i.

     

  • 1949-58 Oldsmobile 303-324-371 Oil Pump Rebuild Kit
    1949-58 Oldsmobile 303-324-371 Oil Pump Rebuild Kit
    x
                

    These oil pump rebuild kits are for 1949-53 303 c.i., 1954-56 324 c.i. and 1957-58 371 c.i. Oldsmobile engines.  They consist of quality parts, made to preserve the life of your oil pump.

    • Oil pump rebuild kit
    • Fits Oldsmobile engines:
      • 1949-1953 303 c.i.
      • 1954-1956 324 c.i.
      • 1957-1958 371 c.i.
  • Auto Meter 5284 GM LS Engine Gauge Adapter Kit
    Auto Meter 5284 GM LS Engine Gauge Adapter Kit
    x
                

    Swapping an GM LS or LQ series engine into your project and trying to figure out how and where to connect all your gauges? This is what you need! This LS Install Kit from Auto Meter includes a full color booklet with step by step instructions and photos documenting the most common installation points for essentials like oil pressure, coolant temp, RPM and more! In addition to the handy manual compiled by Auto Meter's R&D staff, the kit also includes a package of commonly used adapter fittings to assist with the mounting of your gauge sensors, a short depth temperature sensor specific to the LS / LQ installation requirements, and a pull up resistor used when connecting a tachometer to your engine's ECU.

    Includes;

    • 10,000 Ohm Pull Up Resistor
    • 1/8"NPTF Short Depth Eletric Water Temp Sensor
    • M16x1.5 Male to 1/8" NPTF Female adapter for oil pressure
    • M12x1.5 Male to 1/8" NPTF Female adapter for water temperature
    • For installation of Auto Meter Full Sweep and Short Sweep Electric Gauges ONLY!
  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • Stewart Warner 82322 Deluxe 2-1/16 Mech Oil Pressure Gauge, 5-80 PSI
    Stewart Warner 82322 Deluxe 2-1/16 Mech Oil Pressure Gauge, 5-80 PSI
    x
                

    These Deluxe Series 2-1/16" mechanical oil pressure gauges from Stewart Warner feature classic styling with modern accuracy.

    • Classic easy-to-read white graphics on black face dials with white pointers
    • Patented 12 volt light ring for night-time illumination
    • Low profile, polished stainless steel bezel and metal cases

    Oil line kit NOT included. Use kit listed.

    665-82322 Instructions (PDF)

  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • Auto Meter 1200 Gauge Kit Old Tyme White II
    Auto Meter 1200 Gauge Kit Old Tyme White II
    x
                Please view the product's page for more information
            
  • 20 Lb. Oil Pressure Warning Light Kits
    20 Lb. Oil Pressure Warning Light Kits
    x
                

    Alerts driver to any problem before it becomes a hazard. Easy to install. Available with 3/4" or 1" diameter light.

    • Red color light
    • Light comes on at 20 lbs. of pressure
    • Sender has 1/8" NPT threads
    • Brass tee fitting has 1/8" NPT threads
    • Includes 3 ft. of 14 ga. wire 

    604-50600 Instructions (PDF)

  • ARP 230-7003 High Volume Oil Pump Stud Kit, Chevy V8, Black, Hex
    New
    ARP 230-7003 High Volume Oil Pump Stud Kit, Chevy V8, Black, Hex
    x
                

    These oil pump fasteners are for use with Chevy V8 high-volume pumps.  They come as a complete kit featuring a black oxide finish.

    • High-Volume Pump
    • Studs-Hex Head
    • Chromoly-Black Oxide
    • Chevy-Big/Small Block
  • Auto Meter 1201 Gauge Kit, Designer Black II Instruments Pack
    Auto Meter 1201 Gauge Kit, Designer Black II Instruments Pack
    x
                Please view the product's page for more information
            
  • ARP 134-7901 Small Block Chevy Oil Pump Driveshaft Kit
    New
    ARP 134-7901 Small Block Chevy Oil Pump Driveshaft Kit
    x
                

    These oil pump drive shaft kits from ARP are designed for use with heavy duty oil pumps for small block Chevy engines.

    • Black oxide finish
    • HD oil pumps
    • Small Block Chevy
    • Made in the U.S.A
  • ARP 154-7904 Small Block Ford 289-302/Boss 302 Oil Pump Driveshaft Kit
    New
    ARP 154-7904 Small Block Ford 289-302/Boss 302 Oil Pump Driveshaft Kit
    x
                

    These oil pump drive shaft kits from ARP are designed for use with heavy duty oil pumps for 289-302 small block Ford engines.

    • Black oxide finish
    • HD oil pumps
    • 289-302/Boss 302 SBF
    • Made in the U.S.A
  • Adjustable Oil Pressure Warning Light Kits
    Adjustable Oil Pressure Warning Light Kits
    x
                

    Alerts driver to any problem before it becomes a hazard. Easy to install. Available with 3/4" or 1" diameter light.

    • Red color light
    • Sender is preset at 30 lbs. (adjustable +/- 10 lbs.)
    • Sender has 1/8" NPT threads
    • Brass tee fitting has 1/8" NPT threads
    • Includes 3 ft. of 14 ga. wire 

    604-50604 Instructions (PDF)

  • Stewart Warner 82324 Dlx 2-1/16 Oil Pressure Gauge, Mech, 10-200 PSI
    Stewart Warner 82324 Dlx 2-1/16 Oil Pressure Gauge, Mech, 10-200 PSI
    x
                

    These Deluxe Series 2-1/16" mechanical oil pressure gauges from Stewart Warner feature classic styling with modern accuracy. 

    • Classic easy-to-read white graphics on black face dials with white pointers
    • Patented 12 volt light ring for night-time illumination
    • Low profile, bright, stainless steel bezel and metal cases

    Oil line kit NOT included. Use kit listed.

    665-82324 Instructions (PDF)

  • Speedway Stewart-Warner 2-1/16 Inch Oil Pressure and Water Temp Gauge Set
    Speedway Stewart-Warner 2-1/16 Inch Oil Pressure and Water Temp Gauge Set
    x
                

    Speedway offers this 2-1/16" black face Stewart-Warner gauge set. Oil pressure gauge has easy to read 0-100 psi black face. Water pressure gauge has easy to read 100° – 250° F black face. Both gauges are a standard 2-1/16 inches and feature a stainless steel bezel.

    Kit includes:

    • Stewart-Warner 2-1/16" mechanical oil pressure gauge
    • Stewart-Warner 2-1/16" water temperature gauge
    • 2-1/16" aluminum gauge panel
    • Oil pressure gauge is 0-100 psi
    • Water pressure gauge is 100° – 250° F 
     
  • Kevlar Oil Pressure Gauge Line Kit
    Kevlar Oil Pressure Gauge Line Kit
    x
                This 3 piece kit includes a Kevlar 18” -4 AN line with 90° gauge fitting and a straight block fitting.
            
  • Quick Change Cam Cover Kit, Plain
    Quick Change Cam Cover Kit, Plain
    x
                

    Quick change cam cover eliminates the need for dropping the oil pan when replacing timing chain or advancing camshaft. Fits small block Chevy with "long" style (1969-1986) water pump.

    Use of this cover with a "short" water pump typically causes clearance issues with the back of the pump. It can be used with a short pump, but the pump would need to be shimmed for clearance.

  • AFCO 85190 Warning Light Kit, Oil Pressure
    AFCO 85190 Warning Light Kit, Oil Pressure
    x
                

    These units allow the driver to maintain focus on the race.

    Wiring Instructions (PDF)

  • GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • Speedway 2-5/8 Inch Oil Pressure and Water Temp Gauge Set
    Speedway 2-5/8 Inch Oil Pressure and Water Temp Gauge Set
    x
                

    Speedway offers this 2-5/8" backlit white face gauge set. Oil pressure gauge has easy to read 0-100 psi white face. Water pressure gauge has easy to read 100° – 280° F white face. Both gauges are 2-5/8 inches and feature a chrome bezel.

    Kit includes:

    • Speedway 2-5/8" mechanical oil pressure gauge
    • Speedway 2-5/8" water temperature gauge
    • 2-5/8" aluminum gauge panel
    • Oil pressure gauge is 0-100 psi
    • Water pressure gauge is 100° – 280° F 
    • Gauges are backlit with a white face, making them easy to read
     
  • Longacre 904749 SMi Oil Pressure Gauge Replacement Power Wire
    New
    Longacre 904749 SMi Oil Pressure Gauge Replacement Power Wire
    x
                These power wires from Longacre are replacement for AccuTech oil pressure gauges. 
  • Stewart Warner 3 Gauge Oil Pressure, Fuel Pressure & Water Temp. Panel
    Stewart Warner 3 Gauge Oil Pressure, Fuel Pressure & Water Temp. Panel
    x
                This 3 gauge oil pressures, fuel pressure and water temperature panel features 2-5/8" gauges and comes with warning lights, senders and instructions. Includes an easy to hook up wiring harness.
            
  • Speedway Mechanical Oil Pressure Gauge, 2-1/16 Inch
    Speedway Mechanical Oil Pressure Gauge, 2-1/16 Inch
    x
                These mechanical oil pressure gauges have a competition appearance and provide reliable performance. They feature black markings on a white  face and an orange pointer for quick-glance easy monitoring. These quality engineered gauges will look and perform great in your street rod or race car.
    • 2-1/16”
    • Mechanical 0-100 psi range
    • Stainless steel bezel
    • Backlit white face
    • Includes installation kit
    • Overall Diameter: 2.25"
    • Body Diameter: 2.06"
    • Body Length: 1.00"
    • Stud Length: .80"
    • Tube O.D.: .11"
    • Full Sweep
  • Speedway 2 5/8 Inch Oil Pressure Gauge
    Speedway 2 5/8 Inch Oil Pressure Gauge
    x
                

    Lightweight 2-5/8” Speedway Motors gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlight, white face makes these gauges easy to read from 0 – 100PSI. Also included with the gauge is a mounting bracket with all necessary hardware, tubing kit, and complete installation instructions.

    910-65013 Instructions (pdf)

  • Gauge Tubing Kit
    $7.99
    Product Rating: 3.00 Stars
    Gauge Tubing Kit
    x
                Kit includes 4 feet of nylon tubing with brass fittings. Ideal for hooking up your mechanical oil pressure gauge.
            
  • Speedway Two Gauge Panel Kit
    $69.99
    Product Rating: 3.50 Stars
    Speedway Two Gauge Panel Kit
    x
                This 2 5/8" gauge panel kit includes an oil pressure gauge, water temperature gauge, panel, warning lights, sending units and hardware.
            
  • Painless 10123 1966-1976 Ford Muscle Car 21 Circuit Wiring Harness
    Painless 10123 1966-1976 Ford Muscle Car 21 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. This customizable 21 circuit harness can be used in almost any application where you want Ford color coded wires. This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation.

    Designed for 1966-1976 Ford muscle cars including Galaxie, LTD, Falcon, Fairlane, Mustang, Maverick, Torino, and Ranchero.

    NOTE: Will not work with Thunderbirds. 

    1966-1976 Ford Muscle Car Wiring Instructions (PDF)

  • Stewart Warner 3 Gauge Oil Pressure, Oil Temp. & Water Temp. Panel
    Stewart Warner 3 Gauge Oil Pressure, Oil Temp. & Water Temp. Panel
    x
                This 3 gauge oil pressures, oil temperature and water temperature panel features 2-5/8" gauges and comes with warning lights, senders and instructions. Includes an easy to hook up wiring harness.
            
  • Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • Stock Volume Pump or High Volume Pump (both 55-65 psi preset)
  • Moroso 22850 Ford 351C High Pressure Oil Pump Spring
    Moroso 22850 Ford 351C High Pressure Oil Pump Spring
    x
                

    Need an increase in oil pressure? Look no farther then these oil pump springs. Provides a 20% increase in pressure to approximately 100 psi for proper lubrication under sustained high rpm conditions. Fits Melling M84A and M84AHV oil pumps in Ford 351C and 400 engines.

  • Plain 9 Super 7   Carbs on Eddie Meyer Intake Manifold Kit, 1949-53 Ford V8
    Plain 9 Super 7 Carbs on Eddie Meyer Intake Manifold Kit, 1949-53 Ford V8
    x
                

    This kit uses the Eddie Meyer Flathead Ford intake with Speedway's 9 Super 7 ® carbs. It includes two 9Super7 carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line.   The assembled height on this is 16.25".  Assembly required. 

    9 Super 7 ® Linkage Instructions (PDF)

    Eddie Meyer 49-53 Intake Manifold - 

    These Eddie Meyer intake manifolds are reproduced from the original tooling. This '49-'53 Ford version is a 2-piece, long runner, exhaust heated manifold that is better suited to street use.

    • Precision cast and machined aluminum 
    • Works with stock generator/mount (and aftermarket brackets)
    • 4-3/4" carb centers
    • Provisions for original draft tube and oil filler
    • Accepts common 3-bolt carburetors
    • Overall Height:  7-1/2"
    • Draft Tube Hole:  1.25"
    • Oil Filler Tube Hole:  1.39"

    9 Super 7® Primary Carbs -

    Speedway Motors has incorporated many improvements in the 9 Super 7® while maintaining the Stromberg 97 carburetor's original l

Goto Previous PagePrevious Page
1 2 3 4 5 6