Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"iron caliper brake kit" Page 1 of 3

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • 1958-1964 Chevy Disc Brake Kit for Drop Spindles
    1958-1964 Chevy Disc Brake Kit for Drop Spindles
    x
                

    Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets.

    Kit includes:

    • Street brake pads
    • 12" brake rotors
    • GM '69-'77 mid-size single piston iron calipers
    • Caliper slide bolts
    • Rubber brake Lines
    • Bearings & Seals
    • Spindle nut kit 

    Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when compared to the OEM drum brake track width.

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Wilwood 120-9333 GM Iron Metric Caliper, 2 Inch Piston
    Wilwood 120-9333 GM Iron Metric Caliper, 2 Inch Piston
    x
                

    These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories and low cost disc brake conversions. Not IMCA pproved.

    Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability and performance. 

    To address these needs, Wilwood has tooled up two separate castings that are fitted with either 2.75" or 2" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when u

  • Wilwood 120-8924 GM Iron Metric Caliper, 2-3/4 Inch Piston
    Wilwood 120-8924 GM Iron Metric Caliper, 2-3/4 Inch Piston
    x
                

    These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories and low cost disc brake conversions. Not IMCA pproved.

    Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability and performance. 

    To address these needs, Wilwood has tooled up two separate castings that are fitted with either 2.75" or 2" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when u

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • 11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    x
                This rotor allows the use of GM Metric calipers along with a GM car bolt pattern. Vented stock 11" diameter brake rotors for 1974-1980  Mustang  II, Pinto, or Bobcat spindles (or popular GM Metric calipers and brackets). Brake rotors are new, not plugged or re-drilled. Has a   5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread   wheel studs.
    • 5 on 4.75" Bolt circle
    • Granada type rotor
    • For use with popular GM Metric calipers and brackets
    • Bearing and seal kit sold separately (910-31052)
  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Wilwood Midget Inboard Brake Kit
    Wilwood Midget Inboard Brake Kit
    x
                

    .350" x 10.50" drilled steel rotor. 31-spline axle hub for use with all 6" on 5 1/2" bolt circle rotors. Dynalite caliper and pads.

    The Billet Dynalite caliper is powerful, compact and super lightweight. Advanced computer engineering keeps this caliper extremely rigid, resulting in incredible brake torque at a bare minimum in weight, starting at 2.66 pounds. Internal fluid crossover eliminates external tubes and the four position, two-piece bleed screws allow for convenient mounting and easy bleeding. The Billet Dynalite uses standard quick change Dynalite pads, deep cup stainless steel pistons and high temperature seals, and has a black anodized finish. The time proven Dynalite caliper design is stronger and lighter than ever - ideal for Late Models, Modifieds, Sprints, Road Racers and Dragsters.

    Wilwood's steel rotors have applications in all types of motorsports. Weighing in at 4.7 lbs these steel rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. With their 6" on 5 1/2" bolt centers these rotors can stop anything from a hard stopping drag race car at the end of a quarter mile, or a high speed stock car coming in from a qualifier at a super speedway. Steel rotors can also be found in lighter weight open wheel cars such as sprints and modifieds, and a variety of light weight, open

  • QTM Brakes SDK-5 Sprint/Dirt Track Racing Rear Inboard Brake Kit
    QTM Brakes SDK-5 Sprint/Dirt Track Racing Rear Inboard Brake Kit
    x
                Please view the product's page for more information
            
  • Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles.

    Kit features:

    • 9-1/4" brake rotor, 5 x 4-3/4" wheel bolt pattern
    • Remanufactured Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, hardware and instructions included

    Note:

    • Will not work with traditional style steering (no room for upper steering arm).
    • Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.
    • For use only on street rod tube or I-beam front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends.

    910-31948 Instructions (PDF)

  • Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto rotors and calipers onto your machined Chevy 1949-54 car spindles. Disc brake kit is desigend for use only on street rod tube front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends. This kit includes two 9-1/4" rotors with a Ford bolt pattern.

    • 9-1/4" brake rotor, 5 x 4-1/2" wheel bolt pattern
    • Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, and hardware
    • Instructions included

    Note: Will not work with traditional style steering (no room for upper steering arm). Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.

    910-31947 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Steering and Brake Kit for 48 Inch Ford Axle
    Steering and Brake Kit for 48 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    11.00" Pro Series Brakes feature:

    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels.

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-14010996 Instructions (PDF)

     

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, vented iron rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .810" wide x 10-3/4" diameter Ultralite HP 30 Vane rotors - plain finish
    • Caliper has a 1/8" NPT inlet

    835-140152 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • QTM Brakes SDK-2 Sprint Car Rear Inboard Brake Kit, Dirt Track Racing
    QTM Brakes SDK-2 Sprint Car Rear Inboard Brake Kit, Dirt Track Racing
    x
                

    QTM’s standard blade rotors features proprietary friction surface that generates a higher coefficient of friction over traditional iron, aluminum, Ti or other rotors. This allows for a lighter brake package that generates more power with no brake fade.

    QTM calipers are aluminum alloy for both pistons and calipers, allowing for dimensional stability through thermal cycle. Internal tolerances are maintained at all temps – unlike stainless piston and aluminum caliper combinations.

    QTM Hard-Coating of pistons & bores resists corrosion and significantly improves wear. They’re engineered to resist caliper flex a high line pressures and improve pedal feel. Inboard rear calipers have 0.005” deflection at 1500 PSI.

    QTM is used by some of the best in the business, including Donny Schatz, Tony Stewart, Cody Darrah, Bud Kaeding, Levi Jones, Bobby East and more.

    Kit includes:

    • Rear inboard caliper – including Ti heat shields & knock back springs
    • Rear inboard rotor for use with standard 6 bolt clamp
    • Inboard mounting bracket
    • QTM Sintered pad
  • AFCO 7250-0110 GM 10 & 12 Bolt Axle Brake Kit
    AFCO 7250-0110 GM 10 & 12 Bolt Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disc brakes on your GM 12 Bolt rearend. Includes two bolt-on caliper brackets, two vented rotors, two new GM Metric calipers and hardware. Has both 5 x 4-1/2" and 5 x 4-3/4" bolt pattern.

    Kit includes:

    • 11-1/4" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

    Minor fitting to axle housing may be required. 

  • AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disk brakes onto your 7.5" GM rearend. Includes two bolt-on caliper brackets, two vented rotors, two new single-piston GM Metric calipers and hardware. Has 5 x 4-3/4" bolt pattern.

    Minor fitting to axle housing may be required. 

    Kit includes:

    • 11-5/8" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

     

  • QTM Brakes SDK-4 Sprint Car Inboard Rear Brake Kit, Dirt Track Racing
    QTM Brakes SDK-4 Sprint Car Inboard Rear Brake Kit, Dirt Track Racing
    x
                

    QTM’s standard blade rotors features proprietary friction surface that generates a higher coefficient of friction over traditional iron, aluminum, Ti or other rotors. This allows for a lighter brake package that generates more power with no brake fade.

    QTM calipers are aluminum alloy for both pistons and calipers, allowing for dimensional stability through thermal cycle. Internal tolerances are maintained at all temps – unlike stainless piston and aluminum caliper combinations.

    QTM Hard-Coating of pistons & bores resists corrosion and significantly improves wear. They’re engineered to resist caliper flex a high line pressures and improve pedal feel. Inboard rear calipers have 0.005” deflection at 1500 PSI.

    QTM is used by some of the best in the business, including Donny Schatz, Tony Stewart, Cody Darrah, Bud Kaeding, Levi Jones, Bobby East and more!

    Kit includes:

    • Rear inboard caliper, with Ti heat shields & knock back springs
    • Rear inboard rotor
    • Inboard mounting bracket
    • Rotor clamp with Ti hardware
    • QTM Sintered pad
  • QTM Brakes SDK-1 Sprint Car Front Brake Kit, Dirt Track Racing
    QTM Brakes SDK-1 Sprint Car Front Brake Kit, Dirt Track Racing
    x
                

    QTM’s standard blade rotors features proprietary friction surface that generates a higher coefficient of friction over traditional iron, aluminum, Ti or other rotors. This allows for a lighter brake package that generates more power with no brake fade.

    QTM calipers are aluminum alloy for both pistons and calipers, allowing for dimensional stability through thermal cycle. Internal tolerances are maintained at all temps – unlike stainless piston and aluminum caliper combinations.

    QTM Hard-Coating of pistons & bores resists corrosion and significantly improves wear. They’re engineered to resist caliper flex a high line pressures and improve pedal feel.

    QTM is used by some of the best in the business, including Donny Schatz, Tony Stewart, Cody Darrah, Bud Kaeding, Levi Jones, Bobby East and more!

    Kit includes:

    • Front caliper
    • Front rotor
    • Bracket
    • Front caliper pads
  • QTM Brakes SDK-3 Sprint/Dirt Track Racing Rear Outboard RR Brake Kit
    QTM Brakes SDK-3 Sprint/Dirt Track Racing Rear Outboard RR Brake Kit
    x
                

    QTM’s standard blade rotors features proprietary friction surface that generates a higher coefficient of friction over traditional iron, aluminum, Ti or other rotors. This allows for a lighter brake package that generates more power with no brake fade.

    QTM calipers are aluminum alloy for both pistons and calipers, allowing for dimensional stability through thermal cycle. Internal tolerances are maintained at all temps – unlike stainless piston and aluminum caliper combinations.

    QTM Hard-Coating of pistons & bores resists corrosion and significantly improves wear. They’re engineered to resist caliper flex a high line pressures and improve pedal feel.

    QTM is used by some of the best in the business, including Donny Schatz, Tony Stewart, Cody Darrah, Bud Kaeding, Levi Jones, Bobby East and more!

    Kit includes:

    • Rear outboard caliper – RR
    • Rear outboard rotor
    • Outboard RR
    • Outboard RR, flange rotor mount
    • Pads for rear outboard caliper
  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31936 Instructions (PDF)

  • 1978-88 Replacement GM Midsize Metric Calipers
    1978-88 Replacement GM Midsize Metric Calipers
    x
                

    These stock replacement single piston metric calipers were standard equipment on 1978-88 GM midsize cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to midsize 1969-1977 caliper.

    • No core charge required
    • 10mm x 1.50 inlet 
    • Speedway 156 pads and slider bolts included

     

  • Wilwood 140-11017 Heavy Duty Front Brake Kit for Mustang II
    Wilwood 140-11017 Heavy Duty Front Brake Kit for Mustang II
    x
                

    Wilwood Forged Dynalite Front Pro Series Brake Kits offer a complete disc brake upgrade solution for Mustang II-equipped street rods and classic pickups. Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. 

    Calipers mount directly to the spindle with a bolt-on aluminum bracket. Forged billet, five lug hubs with direct mount cast iron rotors combine to provide a significant weight savings compared to stock disc brakes. Kits include all new hardware, wheel bearings, seals, brake pads, brackets, and extra length lug studs.

    Aluminum hubs drilled to accept both 5-on-4-1/2" and 5-on-4-3/4" bolt patterns.

    Wilwood Medium Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11" diameter Ultralite HP 30 Vane rotors - bare finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight clear anodized aluminum hubs

    835-1408652 Instructions (PDF)

    *NOTE*: See Notes tab for important install information.
Goto Previous PagePrevious Page
1 2 3