Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"inverted flare brake" Page 1 of 2

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.57 Stars
    3/16 Inch Steel Brake Line
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • 3/16 Inch Steel Brake Line, 25 Ft. Roll
    $14.99
    $15.99
    Product Rating: 4.70 Stars
    3/16 Inch Steel Brake Line, 25 Ft. Roll
    x
                

    Here's the item for added strength and durability; zinc coated steel brake line. Available in a 25' roll of 3/16" line, no nuts included.

    This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.

    Brake System Builder Tip (GIF)

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Speedway Purple Proportioning Valve
    Speedway Purple Proportioning Valve
    x
                

    Allows easy adjustment of front-to-rear brake bias. Universal design works on all race cars. Has a 100 to 1500 psi range with up to 57 percent pressure reduction.

    Includes two 1/8"-27 NPT to 3/8"-24 inverted flare fittings (not pictured).

    Brake System Builder's Tip (Link) 

  • Mild Steel 45 Degree Inverted Flare Brake Line Kit
    Mild Steel 45 Degree Inverted Flare Brake Line Kit
    x
                

    You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares.

    This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.

    Brake System Builder Tip (GIF) 

    Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Dual Feed Master Cylinder w/ Stainless Sleeve
    Dual Feed Master Cylinder w/ Stainless Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Inverted Flare Thread Nuts for 1/4 Inch Tubing, 7/16-24
    Inverted Flare Thread Nuts for 1/4 Inch Tubing, 7/16-24
    x
                

    Steel 7/16"-24 IFM thread nuts for 1/4" brake line tubing when double flared to 45°.

  • Wilwood 260-1304 Clutch & Small Brake Master Cylinder
    Wilwood 260-1304 Clutch & Small Brake Master Cylinder
    x
                

    This popular, lightweight, compact design is used for clutch and small master cylinder requirements and is well known for its dependability. It incorporates an improved plastic screw-on filler cap which protects the fluid in the 1.4 ounce reservoir.

    • Includes fitting to accept 3/8"-24 inverted flare from 3/16" hard line
    • If AN-3 or AN-4 flex line is to be used, the following adapters will work:
      • 910318-3/8  (3/8"-24 to AN-3 Male Brake Fitting)
      • 6174030  (3/8"-24 Inverted Flare to AN-4 Fitting)

    External Dimensions (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Dual Feed Master Cylinder
    $36.99
    Product Rating: 4.36 Stars
    Dual Feed Master Cylinder
    x
                

    Dual feed master cylinder with 2 bolt flange style mount. Use with Speedway brake pedal assemblies. This cylinder is similar to those used on mid-70's Fords (Mustang, Fairlane/LTD, etc. with disc front/drum rear).

    • Mounting Bolt Holes:  3/8" or 10mm 
    • 7 1/4" long without the pushrod, add 2" for the pushrod
    • 3" wide from the outside of the reservoir to the edge of the outlets
    • Mounting flange is 4" wide
    • Master cylinder is also 3-7/16" tall without a cap
    • Push rod is threaded 3/8"-24 (fine thread). If you need a yoke for the pedal hook-up, use this Forged Steel Yoke.

    Uses 3/8"-24 female inverted flare outlets. If plumbing with AN 3 lines, you will need two each of these AN to IFM Adapters.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Wilwood 260-4893 Tandem Master Cylinder
    $104.99
    $113.99
    Product Rating: 5.00 Stars
    Wilwood 260-4893 Tandem Master Cylinder
    x
                

    Made from durable lightweight aluminum with a large capacity plastic reservoir and dual outlet bores, this Chrysler-style master cylinder utilizes standard O.E.M. internal components. Standard factory mounting bolt holes can be adapted to racing pedal assemblies with an optional mounting adapter bracket 250-3677. This lightweight (2.5 lbs.) reliable master cylinder is used for drag racing, late model stock cars, street rod and off road applications. 

    Has a 1-1/16" bore with 9/16"-20 inverted flare and 1/2"-20 inverted flare outlets. Included are two 3/16" brake line fittings that will require you to cut and reflare your brake line.

    835-2604893 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 260-11179 Adjustable Proportioning Block
    Wilwood 260-11179 Adjustable Proportioning Block
    x
                

    This block has the proportioning valve built-in to the rear brake ports and a stop light switch built into the front brake ports. All ports are 3/8"-24 inverted flare female.

    • Compact design simplifies mounting, plumbing, & wiring
    • Maintains full isolation between front and rear fluid circuits
    • Rear circuit has a single inlet and single outlet with the adjustable proportioning valve
    • Front circuit has a single inlet with two outlets

    Proportioning Valve Installation Instructions (PDF)

    Brake System Builder's Tip (Link)

    Detailed Schematic of Proportioning Block 

    Learn more about how adjustable proportioning valves work by reading our tech article. Brake System Selection.   

  • Adjustable Proportioning Blocks With Brake Light Switch
    Adjustable Proportioning Blocks With Brake Light Switch
    x
                

    This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.

    The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.

    The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females.  It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes.  It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.

    910-31358 Instructions (PDF)

    Learn more about how adjustable proportioning valves work by reading our tech ar

  • Male Inverted Flare Adapters - 1/8 Inch NPT Female
    Male Inverted Flare Adapters - 1/8 Inch NPT Female
    x
                

    The common street rod master cylinders quite often have 1/2"-20 and 9/16"-18 inverted flare outlets and many of you have asked for a way to get from them to 1/8" npt female. This allows you many options to plumb your brakes. 

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Brake Light Switch with 3/8 Inch IFM Adapter Fitting
    Brake Light Switch with 3/8 Inch IFM Adapter Fitting
    x
                

    This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

    • Designed to be installed into a 3/8"-24 inverted flare female fitting
    • Switch has two 1/4" wide male spade terminals
    • 3/8"-24 IFM thread adapter included
    NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.
  • Speedway Polished Proportioning Valve
    Speedway Polished Proportioning Valve
    x
                

    Allows easy adjustment of front-to-rear brake bias. Universal design works on all race cars. Has a 100 to 1500 psi range with up to 57 percent pressure reduction. Includes two 1/8"-27 NPT to 3/8"-24 inverted flare fittings.

    Brake System Builder's Tip (Link)

  • 1939-1948 Ford Car Brake Wheel Cylinder, Rear, 1-1/8 to 1 Inch Bore Size
    1939-1948 Ford Car Brake Wheel Cylinder, Rear, 1-1/8 to 1 Inch Bore Size
    x
                

    Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting and install corrosion resistant stainless steel sleeves with new pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.

    Features a 7/16"-24 inverted flare inlet. To adapt to an AN# 3 brake line, use fitting # 910318-7/16. To adapt to 3/16" steel brake line using a 3/8"-24 flare nut, use fitting # 9103183-7/16.

    • Corrosion resistant stainless steel sleeves
    • New pistons, cups and seals
    • Each has two OEM bore sizes
    • 7/16"-24 inverted flare inlet
    • Choose left or right side
  • Dual 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Dual 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                

    Compact 7" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Dual 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Dual 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                

    Compact 7" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 8 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Dual 8 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                

    Compact 8" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 8 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Dual 8 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                

    Compact 8" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 260-2636 Clutch & Small Brake Master Cylinder, 5/8 Inch Bore
    Wilwood 260-2636 Clutch & Small Brake Master Cylinder, 5/8 Inch Bore
    x
                

    This popular, lightweight, compact design is used for clutch and small master cylinder requirements and is well known for its dependability. It incorporates an improved plastic screw-on filler cap which protects the fluid in the 1.4 ounce reservoir.

    • Includes fitting to accept 3/8"-24 inverted flare from 3/16" hard line
    • If AN-3 or AN-4 flex line is to be used, the following adapters will work:
      • 910318-3/8  (3/8"-24 to AN-3 Male Brake Fitting)
      • 6174030  (3/8"-24 Inverted Flare to AN-4 Fitting)

    External Dimensions (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    x
                

    Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

    Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

    916-31926 Instructions (PDF) 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Aluminum Master Cylinder w/ Stainless Bore
    Aluminum Master Cylinder w/ Stainless Bore
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our sleeved GM-style aluminum master cylinder provides a weight savings and longer service life. It has 2 mounting holes on a 3-1/4" center for 3/8" or 10mm bolts.

    • 1" stainless steel sleeved bore
    • Unpolished aluminum
    • Height from center line to the top most point on the retaining bar is 3.5"
    • 3/8"-24 inverted flare ports on each side
    • Includes plugs for the side not used
    • Deep piston design for manual or power brakes 
    • Pushrod NOT included

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1955-66 GM Master Cylinder for Drum Brakes, Stainless Sleeve
    1955-66 GM Master Cylinder for Drum Brakes, Stainless Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. This is an OEM-style single reservoir master cylinder for many 1955-1966 Chevy applications with drum brakes. Will not work with disc brakes.

    Features a 1" bore and has a 7/16"-24 inverted flare port.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1941-48 Ford Car Master Cylinder with Pedal Bracket
    1941-48 Ford Car Master Cylinder with Pedal Bracket
    x
                

    Bolt a non-boosted master cylinder to your 1941-1948 Ford passenger car frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female.  

    Kit includes master cylinder, pedal assembly and hardware.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

    NOTE: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an automatic transmission. 

  • 1935-40 Ford Master Cylinder with Pedal Bracket
    1935-40 Ford Master Cylinder with Pedal Bracket
    x
                

    Bolt a non-boosted master cylinder to your 1935-1940 Ford car and 1/2 ton pickup frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female.  

    Kit includes master cylinder, pedal assembly and hardware.

    Brake System Builder's Tip (Link)

    NOTE: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an automatic transmission. 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Deluxe Chromed Aluminum Master Cylinder
    Deluxe Chromed Aluminum Master Cylinder
    x
                

    This aluminum master cylinder features a double adjustable proportioning valve, removable metering valve, stop light switch port and a larger fluid capacity. It is approximately the same size as the Corvette master cylinder but only weighs 5 lbs. 1" bore. 3/8"-24 IFF outlets. 

    910-31455 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Longacre 45263 Aluminum -3 AN to 3/8 Inch-24 IFF Brake Line Frame Fitting
    Longacre 45263 Aluminum -3 AN to 3/8 Inch-24 IFF Brake Line Frame Fitting
    x
                

    These brake line fittings from Longacre feature a "bulkhead" style and come with a jam nut for easy mounting.  They are CNC machined from lightweight aluminum.

    • Fitting side 1:  3/16" female inverted flare
    • Fitting side 2:  -3 AN male
    • Angle:  Straight
    • Material:  Aluminum
    • Finish:  Red anodized
  • Longacre 45273 Aluminum Brake Line Fitting
    Longacre 45273 Aluminum Brake Line Fitting
    x
                This aluminum fitting will accept AN4 on one end, and the common 3/8"-24 female inverted flare on the other. It includes a jam nut for easy tab mounting.
            
  • Longacre 44126 AccuTech Mini Brake Balance Gauge Panel
    Longacre 44126 AccuTech Mini Brake Balance Gauge Panel
    x
                

    These lightweight aluminum panels come with (2) 1-1/2" 1500 psi liquid filled gauges and fittings with bleeders.

    • 1/8" NPT on the Gauge Panel
    • Bias Gauge comes with 1/8" to 3/8-24 inverted flare adapters
    • Gauges:
      • Brand:    AccuTech™
      • Style:    Analog
      • Type:    Brake Pressure
      • Range:    0-1500 psi
      • Size:    1-1/2" diameter
      • Face Color:    White
      • Bezel Color:    Silver
      • Liquid Filled:    Yes
      • Quantity:    2
    • Panel:
      • Material:    Aluminum
      • Dimensions:    4-1/2" x 3"
      • Mount Style:    Vertical
      • Fittings Included:    Yes
      • Bleeders Included:    Yes
Goto Previous PagePrevious Page
1 2