Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"inch steel brake line" Page 1 of 5

  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.57 Stars
    3/16 Inch Steel Brake Line
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • 3/16 Inch Steel Brake Line, 25 Ft. Roll
    $14.99
    $15.99
    Product Rating: 4.70 Stars
    3/16 Inch Steel Brake Line, 25 Ft. Roll
    x
                

    Here's the item for added strength and durability; zinc coated steel brake line. Available in a 25' roll of 3/16" line, no nuts included.

    This line bends easily and smoothly with hand tools and can be flared with a 45° double flaring tool. Use in conjunction with our 3/8"-24 inverted flare male brake line nuts.

    Brake System Builder Tip (GIF)

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • SSBC Stainless Steel 3/16 Inch Brake Lines
    SSBC Stainless Steel 3/16 Inch Brake Lines
    x
                

    This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45° double flare with a 3/8"-24 male fitting. Seven different lengths available.

    NOTE: This tubing is flared from the factory with a double flare machine, therefore it is not recommended that these lines be cut and flared to length.

  • Braided Stainless AN 18 Inch Brake Line
    Braided Stainless AN 18 Inch Brake Line
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide.

    Sold in pairs.

  • Lever Tube Bender, 3/16 Inch Brake Line
    Lever Tube Bender, 3/16 Inch Brake Line
    x
                Lever type tubing bender features a 10" handle that gives plenty of  leverage to make smooth, professional, 5/8" radius bends in 3/16"  stainless or mild steel brake line tubing. The graduated scale of the  hard steel die permits accurate, repeatable bends time after time.
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    Stainless Steel Dual Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Dual brake line clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • Stainless 48 Inch Brake Line with 90 Degree End
    Stainless 48 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Stainless 19 Inch Brake Line with 90 Degree End
    Stainless 19 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 2-1/4" to 2-3/4" wide.

    Sold in pairs.

  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    x
                

    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

    AN 3 O.D. is .265 and AN 4 O.D. is .305

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Goodridge 775-44P Steel 7/16 Inch x 24 Brake Banjo Bolt
    Goodridge 775-44P Steel 7/16 Inch x 24 Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 7/16 Inch x 24
    • For use with banjo fittings
    • Overall Length : 1.04 "
    • Under Head Length : .86 "
    • Thread Length : .55 "
    • Thread Pitch : 7/16-24
    • Wrench Type : Hex
    • Material Type : Steel
    • Finish : Zinc 

    Note: To measure what size fitting you have, you will need to measure the outside diameter of the threads and check the tread pitch. To check for thread pitch you will need to count the number of threads you have in 1". It is easier if you have a thread pitch gauge which should be available at your local hardware/bolt supply store. This particular fitting measures 7/16" thread outside diameter and has 24 Threads Per Inch (TPI).

  • Stainless 12 Inch Brake Line with 90 Degree End
    Stainless 12 Inch Brake Line with 90 Degree End
    x
                These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    New
    Garage Sale - Stamped Steel Brake Hat, 3 Inch Offset
    x
                

    These hats are garage sale priced because they have been installed, run and returned.  These do have some runout. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    Stamped steel hat with all three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt circle patterns. Weighs just 2 lbs. and is IMCA approved.

    • Rotor Bolt Circle:  7" x 8 holes
    • 3.00" offset
    • 3.05" diameter center hole
    • 5.83" I.D. clearance
    • Stud Hole Diameter: 1/2"
    • Rotor Mount Bolt Hole: .325"

    Instructions (PDF

  • Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    x
                

    Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Steel 1/8 Inch NPT Male Pipe Nipple
    Steel 1/8 Inch NPT Male Pipe Nipple
    x
                Sometimes you just can't seem to find the right fitting for the job. These steel fittings have 1/8" NPT threads and allow you to plumb things the best way.
            
  • 3/8 Inch-24 IFM to -3 AN Male Steel Brake Adapter Connector Fitting
    3/8 Inch-24 IFM to -3 AN Male Steel Brake Adapter Connector Fitting
    x
                

    Made from high-quality steel, these bulkhead adapters from Speedway give you an easy way to connect lines through firewalls or frames.

    Steel Male Adapter Connector Fitting 

    • AN to IFM all steel adapter
    • 3/8 Inch-24 IFM to -3 AN
  • Steel 10MM x 1.25 Inch Brake Banjo Bolt
    Steel 10MM x 1.25 Inch Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 10MM x 1.25 Inch
    • For use with banjo fittings and crush washers.
  • Steel 10MM x 1.00 Inch Brake Banjo Bolt
    Steel 10MM x 1.00 Inch Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 10MM x 1.00 Inch
    • For use with banjo fittings and crush washers.
  • Steel 10MM x 1.50 Inch Brake Banjo Bolt
    Steel 10MM x 1.50 Inch Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 10MM x 1.50 Inch
    • For use with banjo fittings and crush washers.
  • Braided Stainless AN 18 Inch Brake Line, Straight AN3
    Braided Stainless AN 18 Inch Brake Line, Straight AN3
    x
                Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 

    Select applicable length. AN size is the "-#" at the end of each part number.

  • Steel 1/8 Inch NPT Branch Tee Adapter Fitting
    Steel 1/8 Inch NPT Branch Tee Adapter Fitting
    x
                

    Sometimes you just can't seem to find the right fitting for the job. These steel fittings have 1/8" NPT threads and allow you to plumb things the best way.  These bulkhead tee adapter fittings are manufactured from zinc finished steel to exacting standards for tight, leak-free connections. Plumb your racer like a pro with our bulkhead tee adapter fittings.

    • 1/8" NPT
    • Stainless Steel
    • 1/8" NPT Female Tee with 1/8" Male NPT thread centered
  • Wilwood 160-8135 Scalloped Brake Rotor, 11.75 x .81 Inch
    Wilwood 160-8135 Scalloped Brake Rotor, 11.75 x .81 Inch
    x
                

    When it comes to brake rotors, racers are constantly searching for the ultimate balance between the lowest weight and the ability to effectively manage heat. Decreased rotating weight in the drive line provides quicker deceleration under braking and quicker acceleration out of the corners. Lower weight also benefits handling with improved spring and shock control over the unsprung suspension mass. Wilwood's ULS-32 scalloped iron rotors provides effective lightweight options for sprints, late models, modifieds, and other competition applications that race in low to medium temperature ranges.

    Note: Suitable for Light Dirt Racing applications. Scalloped Brake Rotors are unsafe for street use.

    • Scallop configuration provides greatest weight reduction on a vented straight vane iron rotor
    • Scallop machining removes as much as three pounds, or nearly 33% of the rotor mass
    • Vented castings provide increased cooling capacity over machined steel plate rotors
    • Improved structural durability over drilled rotor designs
    • Thread: Thru

    Rotor Application Chart (GIF)

     

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/i

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • T56 Hydraulic Clutch Line Kit, 25 Inch
    T56 Hydraulic Clutch Line Kit, 25 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • T56 Hydraulic Clutch Line Kit, 36 Inch
    T56 Hydraulic Clutch Line Kit, 36 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Steel 7/16 Inch x 20 Brake Banjo Bolt
    Steel 7/16 Inch x 20 Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 7/16 Inch x 20
    • 2 crush washers included
    • For use with banjo fittings

    Note: To measure what size fitting you have, you will need to measure the outside diameter of the threads and check the tread pitch. To check for thread pitch you will need to count the number of threads you have in 1". It is easier if you have a thread pitch gauge which should be available at your local hardware/bolt supply store. This particular fitting measures 7/16" thread outside diameter and has 20 Threads Per Inch (TPI).

  • Goodridge -2 AN 12 Inch Brake Line
    From: $37.99
    Goodridge -2 AN 12 Inch Brake Line
    x
                Complement your -2 brake line kit by completing the system with -2 caliper lines. Durable and flexible stainless steel AN2 lines with AN3 female fittings.  
            
  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Steel 1/8 Inch NPT Run Tee Fitting
    Steel 1/8 Inch NPT Run Tee Fitting
    x
                Sometimes you just can't seem to find the right fitting for the job. These steel fittings have 1/8" NPT threads and allow you to plumb things the best way.
            
Goto Previous PagePrevious Page
1 2 3 4 5