Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"impala ball joints" Page 1 of 2

  • Speedway 1973-95 Truck K6117 Style Repl Lower Ball Joint
    Speedway 1973-95 Truck K6117 Style Repl Lower Ball Joint
    x
                

    These ball joint use a 1973-1995 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.

    This ball joint is equivalent to Moog K6117. It has an outside diameter of 1.975" and can be used with our sleeve 910-34818 to replace the 1971-1976 Impala lower ball joint 917-20038 when a taller ball joint is desired.

    Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.

     

  • Speedway 1970-02 GM K5208 Style Upper Ball Joint
    Speedway 1970-02 GM K5208 Style Upper Ball Joint
    x
                

    These are factory replacement upper ball joints with OEM geometry. The upper bolt-in ball joint fits stock upper arms and our Metric tubular arms designed for racing use. For a 1/2" raised pivot point upper, use 106-200322LF.

    See Application tab for corresponding vehicle models.

  • QA1 1210-102 Lower Ball Joint, 1971-76 Impala/Caprice
    QA1 1210-102 Lower Ball Joint, 1971-76 Impala/Caprice
    x
                

    For a variety of racing applications, QA1's Screw-In Style Ultimate Ball Joint is a great choice. This patented, self-lubricating design is 100% owner rebuildable and is exclusive to QA1.

    • 71-76 Impala/Caprice
  • AFCO 20038LF Low Friction 1971-76 Impala/Caprice Lower Ball Joint
    AFCO 20038LF Low Friction 1971-76 Impala/Caprice Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    1971-1976 GM B-Body

    • Chevrolet Impala
    • Chevrolet Caprice
    • Chevrolet Bel Air
    • Buick LeSabre
    • Buick Centurion
    • Oldsmobile Delta 88
    • Oldsmobile Delta 98
    • Oldsmobile Custom Cruiser
    • Pontiac Bonneville

    Checking Ball Joint Wear (PDF)

  • Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1995 Chevy & GMC Trucks 

    For Howe Precision Ball Joints ONLY.

  • AFCO 1978-87 Impala Stamped Steel Lower Control Arm, Left
    AFCO 1978-87 Impala Stamped Steel Lower Control Arm, Left
    x
                

    These are stock, reclaimed metric 1978-87 Impala stamped steel control arms that have been cleaned and have had the ball joint removed. A-arm still has OEM bushings that will need to be replaced.

    Accepts Moog 6145 style press-in ball joints.

  • 1970-94 GM Lower Control Arms
    1970-94 GM Lower Control Arms
    x
                

    These new lower control arms fit '70-'94 GM. They are bare and will require you to install bushings and K6141 Moog-style ball joints.

    This control arm is not an OEM replacement and is therefore suggested as an off road/circle track racing control arm only. We recommend applying a tack weld to the bottom of the ball joint.

    Use 1971-76 Impala/Caprice press-in ball joints 917-20038 at right.

    Fits

     

    • 1973-1977 Chevelle
    • 1975-79 Nova
    • 1970-81 Camaro
    • 1978-94 Metric Impala 

     

  • Speedway 1971-76 Impala/Caprice K6141 Style Lower Ball Joint
    Speedway 1971-76 Impala/Caprice K6141 Style Lower Ball Joint
    x
                

    Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.

    917-20038 - This lower ball joint is equivalent to K6141 MOOG. The ball joint has an outside diameter of 2.190" and it presses in.

  • AFCO 20039LF Low Friction GM Lower Ball Joint
    AFCO 20039LF Low Friction GM Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    Checking Ball Joint Wear (PDF)

    See Application tab for corresponding vehicle models.  

  • AFCO 20038-1LF Low Friction 1973-95 Truck-Style Lower Ball Joint, Long
    AFCO 20038-1LF Low Friction 1973-95 Truck-Style Lower Ball Joint, Long
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

     

  • Speedway 1970-02 GM K6145 Style Lower Ball Joint
    Speedway 1970-02 GM K6145 Style Lower Ball Joint
    x
                

    Factory replacement lower ball joints.

    See Application tab for corresponding vehicle models.

  • Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • GM F-Body - 1969-81 Camaro/Firebird
    • GM X-Body - 1968-79 Nova/Apollo/Ventura, etc.
    • GM B-Body - 1971-96 Impala/Caprice
    • GM A-Body - 1964-81 Chevelle/Malibu/El Camino
    • GM G-Body - 1978-88 Monte Carlo/Regal/Cutlass

    For Howe Precision Ball Joints ONLY.

  • AFCO 20032LF K5208 Low Friction GM Upper Ball Joint
    AFCO 20032LF K5208 Low Friction GM Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    Checking Ball Joint Wear (PDF)

    For 1/2" raised pivot point use 106-200322LF

    See Application tab for corresponding vehicle models.  

  • Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.
    • Bolt-in (4-bolt) style and cross reference with MOOG #K6136.

    Precision Ball Joint Illustration (GIF)

  • AFCO 20038-1 Standard 1973-95 Truck-Style Lower Ball Joint
    AFCO 20038-1 Standard 1973-95 Truck-Style Lower Ball Joint
    x
                

    Not all ball joints are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joints use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.
  • Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint.  They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720038-1 and MOOG #K6117.

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joints Illustration (GIF)

  • AFCO 20032-1 Standard 1973-95 Truck-Style Upper Ball Joint
    AFCO 20032-1 Standard 1973-95 Truck-Style Upper Ball Joint
    x
                

    Not all ball joints are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joints use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

     

  • AFCO 20032-1LF Low Friction 1973-95 Truck-Style Upper Ball Joint
    AFCO 20032-1LF Low Friction 1973-95 Truck-Style Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

     

  • QA1 Repl Ball Joint Stud for 1210-504 Housing K5208 Style Ball Joint
    QA1 Repl Ball Joint Stud for 1210-504 Housing K5208 Style Ball Joint
    x
                

    QA1’s patented Ultimate Ball Joints are 100% owner rebuildable. Multiple stud lengths are available.

    • '73-'87 Regal
    • '71-'96 Impala
    • '71-'94 Caprice
    • '73-'82 Lemans
    • '73-'88 Grand Prix
    • '73-'88 Cutlass
    • '70-'81 Camaro/Firebird
    • '73-'83 Chevelle/Malibu
    • '73-'88 Monte Carlo
    • '71-'81 GTO
    • '75-'79 Nova/Chevy II
    • '82-'02 S-10 Trucks  2WD

     

  • QA1 Repl Ball Joint Stud for 1210-512 Housing K6141 Style Ball Joint
    QA1 Repl Ball Joint Stud for 1210-512 Housing K6141 Style Ball Joint
    x
                

    QA1’s patented Ultimate Ball Joints are 100% owner rebuildable. Multiple stud lengths are available.

    • 71-76 Impala/Caprice
  • AFCO 20035 Racing & Hybrid Ball Joint
    $29.99
    $30.99
    AFCO 20035 Racing & Hybrid Ball Joint
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    Fits:

    • Most strut cars, 1960-66 Chrysler, 1971-1976 Impala and most wide-type dirt cars.
    • Also fits Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.
  • Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, steel adjuster - IMCA Approved

    Precision Ball Joint Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • AFCO 20036 Standard 1960-66 Chrysler-Type Lower Ball Joint
    AFCO 20036 Standard 1960-66 Chrysler-Type Lower Ball Joint
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    • 7 degree taper

    Fits:

    • Most strut cars, 1960-66 Chrysler, 1971-1976 Impala and most wide-type dirt cars.
    • Also fits Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.
  • Speedway 1960-66 Chrysler K727 Style Lower Ball Joint
    Speedway 1960-66 Chrysler K727 Style Lower Ball Joint
    x
                

    Lower screw-in ball joint fits most strut cars, 1960-66 Chrysler, 1971-1976 Impala and most wide-type dirt cars. Also fits Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.

    • The measurements for the wrench area is 2.125"  
    • The flat area and the round area is 2.320."
    • The threaded area on the ball joint is 2.025."
  • 1955-70 Chevy Replacement Upper Ball Joint, Fullsize Car
    1955-70 Chevy Replacement Upper Ball Joint, Fullsize Car
    x
                

    If your car still has ball joints that are riveted in, they are now over 50 years old. These new OEM ball joints feature a metal gusher bearing design that enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

    These new replacement upper ball joints fit the following chassis:

    • '55-'57 Chevy car upper
    • '58-'64 Chevy car upper
    • '65-'70 Chevy fullsize car upper
    • '53-'82 Corvette upper

    Ball Joint Tech Tips - Grease Zerks (PDF)

    Ball Joint Tech Tips - Boot Installation (PDF)

    Ball Joint Tech Tips - Bearing Failure (PDF)

  • QA1 1210-109 K6145 Style Lower Ball Joint Kit w/ Extended Length Stud
    New
    QA1 1210-109 K6145 Style Lower Ball Joint Kit w/ Extended Length Stud
    x
                Please view the product's page for more information
            
  • Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, aluminum adjuster

    These are press-in style and cross reference Speedway part #91720038 and MOOG #K6141.

    Precision Ball Joints Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • AFCO 20039 K6145 Standard GM Lower Ball Joint
    AFCO 20039 K6145 Standard GM Lower Ball Joint
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    See Application tab for corresponding vehicle models. 

  • AFCO 20038 Standard 1971-76 GM B-Body Lower Ball Joint
    AFCO 20038 Standard 1971-76 GM B-Body Lower Ball Joint
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    See Application tab for corresponding vehicle models. 

  • QA1 1210-104 K5208 Style Upper Ball Joint Kit w/ Extended Length Stud
    New
    QA1 1210-104 K5208 Style Upper Ball Joint Kit w/ Extended Length Stud
    x
                Please view the product's page for more information
            
  • Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Upper 917-22302

    • Bolt-in (4-bolt) style and cross reference with MOOG #K5208.
    Fits
    • 1970-81 Camaro/Firebird
    • 1973-81 Chevelle A-body
    • 1975-79 Nova
    • 1978-88 Monte Carlo G-body
    • 1971-96 Impala/Caprice 

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .2" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.046"
    • Dimension "L" - 3.54"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • QA1 1210-104 K5208 Style Upper Ball Joint
    QA1 1210-104 K5208 Style Upper Ball Joint
    x
                

    QA1's 4-Bolt Style Ultimate Ball Joint is ideal for a variety of racing applications. Exclusive to QA1, this patented, self-lubricating design is 100% owner rebuildable.

    • '73-'87 Regal
    • '71-'96 Impala
    • '71-'94 Caprice
    • '73-'82 Lemans
    • '73-'88 Grand Prix
    • '73-'88 Cutlass
    • '70-'81 Camaro/Firebird
    • '73-'83 Chevelle/Malibu
    • '73-'88 Monte Carlo
    • '71-'81 GTO
    • '75-'79 Nova/Chevy II
    • '82-'02 S-10 Trucks  2WD
  • AFCO 20032 K5208 Standard GM Upper Ball Joint
    AFCO 20032 K5208 Standard GM Upper Ball Joint
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    • 10 degree taper
    • use reamer part #10680771

    See Application tab for corresponding vehicle models.

  • Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K6145.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1976 Chevy Impala 

    For Howe Precision Ball Joints ONLY.

  • AFCO 1968-72 Chevelle Stamped Steel Lower Control Arm, Left
    AFCO 1968-72 Chevelle Stamped Steel Lower Control Arm, Left
    x
                

    These are stock, reclaimed 1968-72 Chevelle A-Body stamped steel control arms that have been cleaned and have had the ball joint removed. A-arm still has OEM bushings that will need to be replaced.

    Accepts Moog K5103 style press-in ball joints for stock spindle, or Moog K6145 ball joints for other GM spindles.

Goto Previous PagePrevious Page
1 2