Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ii radiator hose" Page 1 of 7

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 4.00 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Diamond AC Bulkhead Plates with Fittings
    Diamond AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 2-1/2" x 4-1/2"

    You will need to have the fittings crimped on the hoses by your local shop.

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Straight Aluminum Hose Connectors, 6 Inch
    Straight Aluminum Hose Connectors, 6 Inch
    x
                

    These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (O.D.) needed.

  • Hose Adapter for Steel Flexible Radiator Hose Kit to 2 Inch Outlet
    Hose Adapter for Steel Flexible Radiator Hose Kit to 2 Inch Outlet
    x
                A 2" radiator rubber hose sleeve adapter with 1-1/2" reducer and 2 hose clamps. This coolant hose adapter is for use with flexible steel radiator hoses. Fits hose to 2" outlet.
            
  • Stainless Braided Radiator Hose Cover, 1-1/2 to 2 Inch O.D.
    Stainless Braided Radiator Hose Cover, 1-1/2 to 2 Inch O.D.
    x
                Use in conjunction with Tube Seal™ Hose Ends.  Duplicates the appearance of far more expensive stainless steel braided  hose and fittings. Fits over 1-1/2" - 2" O.D. hose. 

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.
  • Gates 25477 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 15-1/2 Inch
    Gates 25477 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 15-1/2 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Flexible Radiator Hose Kit, 36 Inch
    From: $79.99
    Product Rating: 5.00 Stars
    Flexible Radiator Hose Kit, 36 Inch
    x
                

    Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kits includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • 1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up the flathead in your postwar Ford or Mercury by replacing the original cylinder head-to-radiator hoses with these stainless or chrome-plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.

    • Simple way to add some sparkle to your engine compartment
    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
  • Gates 25474 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 12 Inch
    Gates 25474 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 12 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Moose Blocks 2015 Engine Heater Hose Bracket     1/2 NPT Barnes Mount
    Moose Blocks 2015 Engine Heater Hose Bracket 1/2 NPT Barnes Mount
    x
                

    Hole pattern is identical to the Barnes' oil filter bracket, mounts all together with use of a longer bolt.

    • 1/2" NPT threads
  • Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Gates 25482 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 22 Inch
    Gates 25482 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 22 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Gates 25480 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 20 Inch
    Gates 25480 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 20 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Gates 25484 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 25 Inch
    Gates 25484 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 25 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Gates 25476 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 14 Inch
    Gates 25476 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 14 Inch
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Aluminum 90 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 5.00 Stars
    Aluminum 90 Degree Hose Connectors
    x
                

    These 90° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter needed.

  • 4-1/2 Inch Chopped 1932 Lo-Boy Aluminum Radiator
    4-1/2 Inch Chopped 1932 Lo-Boy Aluminum Radiator
    x
                

    Latest high efficiency core designed with Chevy-style outlets. Perfect fit with Lo-Boy grille shell and grille insert. Super duty, all aluminum construction is ideal for high compression or supercharged engines.

    • 2 rows of 1" furnace brazed cores
    • TIG welded brackets
    • Internal automatic transmission cooler
    • 1-1/2" upper inlet & 1-3/4" lower outlet
    • Height:  22-1/2"
    • Width:  17-1/2" w/o brackets
    • Thickness @ Core:  2-17/64"
    • Core:  16-1/4" W x 17-1/4" T
    • Trans Cooler Ports:  1/8"-27 NPT
    • Hose Nipple on Filler Neck:  5/16" O.D.
    • Accessory Port on Lower Tank:  1/2"-14 NPT
    • passenger side lower hose (1-3/4"), driver side upper hose (1-1/2")

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Speedway C&R Heater Hose Kit
    $149.99
    Speedway C&R Heater Hose Kit
    x
                

    This kit is used for plumbing a C&R engine heater to the race car.  Comes with 10 feet of Black Aeroquip hose with brass push-on ends.  Features 2 female steel quick releases for the hoses and 2 aluminum mail quick releases for the car.

    • Plumbing a C&R engine heater to race car
    • 10 feet of Black Aeroquip hose
    • Brass push-on end fittings
    • (2) female steel quick releases for the hoses
    • (2) aluminum mail quick releases for the car
  • Long Chrome Heater Hose Fitting, 3/4 Inch Hose
    Long Chrome Heater Hose Fitting, 3/4 Inch Hose
    x
                

    Boy these fittings are hard to find! Long style for 3/4" hose. 1/2" NPT thread. Can be used for intake and water pump.

  • 1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up your flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps. This is a quick and easy way to add some sparkle to your engine compartment.

    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
    • Easy installation
  • Inline AC Bulkhead Plates with Fittings
    Inline AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 5-1/2" long x 1-1/4" wide

    You will need to have the fittings crimped on the hoses by your local shop.

  • Hot Product HPE-CV-1.5-NPT Hot Head 1.5 In Radiator Hose Quick Release
    Hot Product HPE-CV-1.5-NPT Hot Head 1.5 In Radiator Hose Quick Release
    x
                

    Hot Head engine heater 1-1/2" coolant hose adapter with two 1/2" NPT male nipples and an internal directional control valve.

    Quick release fittings sold separately.

  • 1955-1956 Chevy Car Heater Core
    1955-1956 Chevy Car Heater Core
    x
                

    These are a 100% new, factory replacement Tri-Five heater core. Not a marginal recore like others sell. For '55-'56 Chevrolet cars without factory air conditioning. We also recommend the mounting plate, which is normally rusted beyond use.

    Note: General Motors produced two different style heater cores for these vehicles. The heater cores we carry are a reproduction of the "deluxe" model, not the "standard."

  • Radiator Neck Kit
    $19.99
    Product Rating: 4.00 Stars
    Radiator Neck Kit
    x
                

    These aluminum hose neck kits make it easy to rebuild your aluminum radiator. Includes a 1-1/2" and a 1-3/4" neck, weld-in 1/4" NPT fitting, hose barb and petcock. Fabrication and aluminum welding required.

    • 1-3/4" tube = 3" long
    • 1-1/2" tube = 2-1/2" long
  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Aeroquip FBU1600 Starlite Hose, -16 AN
    Aeroquip FBU1600 Starlite Hose, -16 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Universal Aluminum Radiator - 27 Inch Tall, Passenger Side Outlet
    Universal Aluminum Radiator - 27 Inch Tall, Passenger Side Outlet
    x
                

    These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s, '40s & '50s medium width nose vehicles (be sure to measure before you order).

    • Built-in 7-plate automatic transmission cooler
    • Centered filler neck w/ hose nipple
    • 2 rows of 1" tubes
    • Trans Cooler ports:  1/2"-20 inverted flare

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • Billet Specialties 67825 Aluminum Hose Clamp, 1-1/2 Inch Rubber Hose
    Billet Specialties 67825 Aluminum Hose Clamp, 1-1/2 Inch Rubber Hose
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! Provides an excellent finishing touch for your radiator hose dress kit. For use with 1-1/2" rubber radiator hose.

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
    Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
    x
                

    This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater. It has a nipple to attach one, 2.5" flex hose (like dryer vent hose - not included) to the side of the plenum.

    The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction or even closed to force air into the defrost hose.

    • 4-3/4" tall
    • 8-1/2" wide
    • 4-1/2" deep

    When installed on the heater, the overall dimensions of the assembly (heater with plenum) are:

    • 5" tall
    • 10" wide
    • 13" deep

    When the plenum is snapped onto the heater, the total depth (front to back) is approximately 13".

     

  • Universal Aluminum Radiator, 26 Inch Tall, Passenger Side Outlet
    Universal Aluminum Radiator, 26 Inch Tall, Passenger Side Outlet
    x
                

    These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s & '40s narrow nose vehicles (be sure to measure before you order).

    • Built-in 7-plate automatic transmission cooler
    • NO filler neck - must use inline hose filler
    • 2 rows of 1" tubes 

    Measurements are overall:

    • 16" wide
    • 26" tall
    • 2-1/4" thick
    • Core Width:  15"
    • Core Height:  21-1/4"
    • Top neck (inlet) is 1-1/2"
    • Lower neck (outlet) is 1-3/4"
    • Trans Cooler ports are 1/8" NPT

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM
    AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM
    x
                

    These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed.

    All measurements include the end tanks. Overall width includes mountings flanges if used.

    • 1-1/2" upper hose neck on the drivers side
    • 1-3/4" lower hose neck on the passenger side
    • 1/4" NPT brass drain cocks
    • Welded-on 2" wide side mount flanges on most models
    • Built-in fin covers on top and bottom of radiator
    • Do not have built-in transmission coolers
    • 10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow

    Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Silicone/Aluminum Radiator Hose Kit
    Silicone/Aluminum Radiator Hose Kit
    x
                

    Trying to find hoses for that custom project can be a challenge, so we now offer this complete starter kit that can be used in many applications.

    Kit includes:

    • 1-3/4" ID 90 degree hose, 13.75" long (measured on outside of bend)
    • 1-1/2" ID 90 degree hose, 13.50" long
    • 1-1/2" ID 45 degree hose, 9.25" long
    • 1-3/4" ID straight hose, 6" long
    • 1-3/4" ID 45 degree aluminum tube, 12" long
    • 1-1/2" ID straight aluminum tube, 6" long
  • AFCO High Performance Radiator Hose Kit
    AFCO High Performance Radiator Hose Kit
    x
                

    High-temp silicone hose and aluminum coolant hose adapters allow you to customize your cooling system.

    Includes:

    • (1) - 1-3/4"(I.D.) x 13.50" 90 deg. silicone elbow (measured from the outside of the bend)
    • (1) - 1-1/2"(I.D.) x 13.25" 90 deg. silicone elbow (measured from the outside of the bend)
    • (1) - 1-1/2"(I.D.) x 9.25"  45 deg. silicone elbow (measured from the outside of the bend)
    • (1) - 1-3/4"(I.D.) x 6"  Straight silicone
    • (1) - 1-3/4"(O.D.) x 12" 45 deg. aluminum tube (measured from the outside of the bend)
    • (1) - 1-1/2"(O.D.) x 6"  Straight aluminum tube
  • 1937-39 and 1942-48 Flathead Ford V8 Radiator Hose Kits
    1937-39 and 1942-48 Flathead Ford V8 Radiator Hose Kits
    x
                

    Show some style! Add some sparkle! Replace your 59A flathead's original cylinder head-to-radiator hoses with these polished stainless or chrome-plated pieces. Each kit replaces both upper hoses for a flathead Ford V8 and includes two chrome or stainless tubes, four 3-ply rubber connector hoses, and eight hose clamps.

  • Chevy 45 Degree Pivoting Aluminum Water Neck
    Chevy 45 Degree Pivoting Aluminum Water Neck
    x
                

    Pivoting water neck is die-cast, polished aluminum. This O-ring sealed water neck rises at a 45° angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86 and accepts normal GM thermostats and 1-1⁄2" I.D. hoses. Includes hardware.

    Bolt hole dimension is approximately 3-1/4" center to center.

  • Chrome 90 Degree Heater Hose Fitting, 5/8 Inch Hose
    Chrome 90 Degree Heater Hose Fitting, 5/8 Inch Hose
    x
                

    Boy these fittings are hard to find! 90° style for or 5/8" hose. 1/2" NPT thread. Can be used for intake and water pump.

  • Moose Blocks 2017 Engine Heater Hose Bracket     1/2 NPT Universal Mount
    Moose Blocks 2017 Engine Heater Hose Bracket 1/2 NPT Universal Mount
    x
                These hot set up blocks from Moose Blocks feature an anodized aluminum black finish and 1/2" NPT thread pitch.
    • 1/4" bolt hole in the center for universal mounting
    • 1/2" NPT threads
Goto Previous PagePrevious Page
1 2 3 4 5 6 7