Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ididit wiring column" Page 1 of 3

  • Painless Wiring 30805 GM Steering Column Pigtail Kit
    Painless Wiring 30805 GM Steering Column Pigtail Kit
    x
                

    Steering column pigtail kit lets you use factory-type connectors on your key-switch-equipped GM-style column.

    This kit is used to make the connection from the wiring harness to GM and Ididit columns. It can be used to replace damaged or worn plugs. The supplied GM color-coded wires are 12" long, so you'll have plenty of room to splice to your harness.

    Includes:

    • ignition connector
    • turn signal connector
    • dimmer switch connector
    • pre-terminated 12" pigtails

    GM Steering Column Pigtail Kit Installation Instructions (PDF)

  • Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '70-'75 Camaro
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • Collapsible
    • 1970 -74  use 3-7/8" wiring plug
    • 1975 uses a 4-1/4" wiring plug
    • 1" - 48 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1520790051 Black Tilt Steering Column, 1969 Camaro
    Ididit 1520790051 Black Tilt Steering Column, 1969 Camaro
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69 Camaro & Firebird
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • Collapsible
    • 3-7/8" wiring plug
    • 3/4" - 36 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1120610010 Plain Tilt Steering Column, 1966 Chevelle
    Ididit 1120610010 Plain Tilt Steering Column, 1966 Chevelle
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels.
    • For '66 Chevelle ONLY
    • Bolt-In
    • Floor shift, dash ignition
    • Raw paintable steel finish
    • 8 position tilt
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8" Wiring plug
    • 1" - DD lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69-'72 Chevelle
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 1" - 48 lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1120650010 Plain Tilt Steering Column, 1960-66 GM Pickup
    Ididit 1120650010 Plain Tilt Steering Column, 1960-66 GM Pickup
    x
                The hot rod experts at Ididit put a lot of time  and research into these retrofit steering columns, ensuring a perfect  fit for your specific vehicle. These Ididit retrofit floor shift  steering columns are designed to fit in the factory location and, in  many cases, will put the steering wheel back in its original location.  They include self-canceling turn signals, 4-way flashers and knobs and  handles. The columns are designed for use with aftermarket steering  wheels.
    • For '60-'66 Chevy Truck ONLY
    • Bolt-In
    • Floor shift, dash ignition
    • Raw paintable steel finish
    • 8 position tilt
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8" Wiring plug
    • 3/4" - 36 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • American Autowire 35785 1957 Chevy O/E Wiring Harness
    American Autowire 35785 1957 Chevy O/E Wiring Harness
    x
                

    This wiring harness adapts the OEM 1957 harness to the aftermarket Ididit column. The Ididit column uses the flat ribbon plug common to the later GM columns and should be adaptable to work with the later GM columns and other aftermarket columns using the GM ribbon style flat plug in. As always, wiring layout and sequence will need to be verified for each circuit.

    • Stock o/e harness to an Ididit steering column
    • Chevrolet Passenger 1957
    • For 1969-74 GM column to stock dash

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • Ididit 1963-65 Chevy II/Nova Steering Column Wiring Harness 4-Way Adapter Kit
    Ididit 1963-65 Chevy II/Nova Steering Column Wiring Harness 4-Way Adapter Kit
    x
                This wiring harness kit is used to easily adapt your vehicles stock wiring to your Ididit steering column. This harness also adds the convenience of a 4-way flasher that was not available back in the day, in case you ever need it.
    • 1963-1965 Chevy-II/Nova
    • 1963-1966 Chevy Pickup
    • 1963-1966 Bel-Air/Impala/Biscayne/Caprice Wiring Harness Adapter & 4-Way Flasher Kit
    • Made in America
  • Ididit 1966 Nova Steering Column Wiring Harness Adapter 4-Way Flasher Kit
    Ididit 1966 Nova Steering Column Wiring Harness Adapter 4-Way Flasher Kit
    x
                This wiring harness kit is used to easily adapt your vehicles stock wiring to your ididit steering column. This harness also adds the convenience of a 4-way flasher that was not available back in the day, in case you ever need it.
    • 1964-1966 Chevelle
    • 1964-1966 Chevy Pickups
    • 1966 Chevy-II/Nova Wiring Harness Adapter & 4-Way Flasher Kit
    • Made In America
  • Ididit 1962 Nova Steering Column Wiring Harness Adapter 4-Way Flasher Kit
    Ididit 1962 Nova Steering Column Wiring Harness Adapter 4-Way Flasher Kit
    x
                This wiring harness kit is used to easily adapt your vehicles stock wiring to your Ididit steering column. This harness also adds the convenience of a 4-way flasher that was not available back in the day, in case you ever need it.
    • 1962 Chevy II/Nova
    • 1960-1962 Chevy Pickups
    • 1959-1962 Bel-Air/Impala/Biscayne Wiring Harness Adapter & 4-Way Flasher Kit
    • Made in America
  • Ididit 1120646010 1962-66 Nova Tilt Steering Column, Plain
    Ididit 1120646010 1962-66 Nova Tilt Steering Column, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets,   tabs and switches. These columns are much cleaner in appearance and   eliminate the column-mounted key switch. These non-shift versions   feature a 2" O.D. column tube. 

    Each has a standard GM 3-7/8" wire harness, 8-position tilt, and accept stock 1962-66 Nova steering wheels or our custom wheels with an adapter (sold separately).

    • 8 position tilt
    • Self canceling turn signal
    • 4 way flashers
    • Knobs & Levers
    • 3-7/8" wiring plugs
    • 3/4"-36 lower shaft
    • Plain steel floor shift column fits 62-66 Nova

    Dont forget to include our 1962-64 Nova floor mount steering column plate (4466267) with your new steering column along with the suggested wiring harness adapter kits shown below.

  • Ididit 1120657010 Plain Tilt Steering Column, 1967-72 GM Pickup
    Ididit 1120657010 Plain Tilt Steering Column, 1967-72 GM Pickup
    x
                

    The hot rod experts at Ididit put a lot of time and research into these retrofit steering columns, ensuring a perfect fit for your specific vehicle. These Ididit retrofit floor shift steering columns are designed to fit in the factory location and, in many cases, will put the steering wheel back in its original location. They include self-canceling turn signals, 4-way flashers and knobs and handles. The columns are designed for use with aftermarket steering wheels.

    • For '67-'72 Chevy Truck
    • 8 position tilt
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8" wiring plug
    • 3/4"-36 lower shaft
    • Paintable raw steel finish
    • Made in the USA
  • Ididit 1300645010 1968 Mustang Tilt Steering Column for Rack & Pinion
    Ididit 1300645010 1968 Mustang Tilt Steering Column for Rack & Pinion
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '68 Mustang using aftermarket rack & pinion ONLY
    • Bolt-In
    • Raw paintable steel finish
    • 8 position tilt
    • Ford top shaft
    • Ford self canceling turn signals
    • 4 way flasher
    • Ford style knob & Levers
    • 3/4" - 36 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1120630010 Plain Tilt Steering Column, 1967 Chevy II / Nova
    Ididit 1120630010 Plain Tilt Steering Column, 1967 Chevy II / Nova
    x
                

    The hot rod experts at Ididit put a lot of time and research into these retrofit steering columns, ensuring a perfect fit for your specific vehicle. These Ididit retrofit floor shift steering columns are designed to fit in the factory location and, in many cases, will put the steering wheel back in its original location. They include self-canceling turn signals, 4-way flashers and knobs and handles. The columns are designed for use with aftermarket steering wheels.

    • For '67 Nova only
    • 8 position tilt
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 3/4 -36 lower shaft
    • Paintable raw steel finish
    • Made in the USA
  • Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    x
                When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.  

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Ididit 2305170040 GM 5.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2305170040 GM 5.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These mounts feature two cut-outs to allow wiring, etc. to clear.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
    Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
    x
                Make your 1955-1956 Chevy more comfortable to drive by installing a new Ididit steering column. These tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1455 Instructions (PDF)


     

  • Ididit 1130180010 Plain Shorty 16 Inch Tilt Steering Column w/ Shifter
    Ididit 1130180010 Plain Shorty 16 Inch Tilt Steering Column w/ Shifter
    x
                

    When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Ididit 1140550020 1955-56 Chevy Tilt & Shift Steering Column, Chrome
    Ididit 1140550020 1955-56 Chevy Tilt & Shift Steering Column, Chrome
    x
                Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. The tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1455C Instructions (PDF)

  • Ididit 1180300010 Universal Tilt/Telescoping Floor Shift Steering Column, 30 Inch
    New
    Ididit 1180300010 Universal Tilt/Telescoping Floor Shift Steering Column, 30 Inch
    x
                Please view the product's page for more information
            
  • Ididit 1180280010 Universal Tilt/Telescoping Floor Shift Steering Column, 28 Inch
    New
    Ididit 1180280010 Universal Tilt/Telescoping Floor Shift Steering Column, 28 Inch
    x
                Please view the product's page for more information
            
  • Ididit 1180320010 Universal Tilt/Telescoping Floor Shift Steering Column, 32 Inch
    New
    Ididit 1180320010 Universal Tilt/Telescoping Floor Shift Steering Column, 32 Inch
    x
                Please view the product's page for more information
            
  • Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • Ididit 1120570010 1957 Chevy Tilt Steering Column, Plain
    Ididit 1120570010 1957 Chevy Tilt Steering Column, Plain
    x
                

    Make your 1957 Chevy more comfortable to drive by installing a new Ididit steering column. Ididit tilt steering columns with no shifter will move the steering wheel back 2" towards the driver. Columns use the common 1969 and up GM wheel adapters.

    • Self-Canceling Turn Signals
    • 4-Way Flashers
    • Billet Knobs and Handles
    • 3-7/8" Wiring Plug
    • 1" DD Lower Shaft
    • Plain steel finish

    Wiring adapters for the stock harness are listed along with a floor mount. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1257 Instructions (PDF)

  • Ididit 1120550010 1955-56 Chevy Tilt Steering Column, Plain
    Ididit 1120550010 1955-56 Chevy Tilt Steering Column, Plain
    x
                Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. These tilt, non-shift columns move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1255 Instructions (PDF)


     

  • Ididit 1120570020 1957 Chevy Tilt Steering Column, Chrome
    Ididit 1120570020 1957 Chevy Tilt Steering Column, Chrome
    x
                

    Make your 1957 Chevy more comfortable to drive by installing a new Ididit steering column. Ididit tilt steering columns with no shifter will move the steering wheel back 2" towards the driver. Columns use the common 1969 and up GM wheel adapters.

    • Self-Canceling Turn Signals
    • 4-Way Flashers
    • Billet Knobs and Handles
    • 3-7/8" Wiring Plug
    • 1" DD Lower Shaft
    • Chrome finish

    Wiring adapters for the stock harness are listed along with a floor mount. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1257C Instructions (PDF)

  • Ididit 1120651010 1947-54 GM Pickup Tilt Column Only, Plain
    Ididit 1120651010 1947-54 GM Pickup Tilt Column Only, Plain
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249.
            
  • Ididit 1120651020 1947-54 GM Pick-up Tilt Column Only, Chrome
    Ididit 1120651020 1947-54 GM Pick-up Tilt Column Only, Chrome
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249. 
            
  • Ididit 1130651010 1947-54 GM Pick-up Tilt Column with Shifter, Plain
    Ididit 1130651010 1947-54 GM Pick-up Tilt Column with Shifter, Plain
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • Ididit 2304170040 GM 4.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2304170040 GM 4.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2302170040 GM 2.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2302170040 GM 2.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2303170040 GM 3.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2303170040 GM 3.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome
    Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Column is a straight bolt-in when used with the new rag joint (also sold separately). 

    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4" 36 Lower Shaft
    • Collapsible
    • Chrome plated steel finish

    446-6869C Instructions (PDF)

  • Ididit 1300644010 1968 Mustang Tilt Steering Column, Plain Steel
    Ididit 1300644010 1968 Mustang Tilt Steering Column, Plain Steel
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Column is a straight bolt-in when used with the new rag joint (also sold separately). 

    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4" 36 Lower Shaft
    • Collapsible
    • Plain unpainted steel finish

    446-6869 Instructions (PDF)

    Note: Steering wheel not included.

  • Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Requires you to modify the original input shaft on the steering box and you will need coupler 446-3449 that is sold separately.

    • Chrome plated steel finish 
    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4"-36 Lower Shaft

    446-6466C Instructions (PDF)

  • Ididit 1120642010 1964-66 Mustang Tilt Steering Column, Plain
    Ididit 1120642010 1964-66 Mustang Tilt Steering Column, Plain
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Requires you to modify the original input shaft on the steering box and you will need coupler 446-3449 that is sold separately.

    • Plain unpainted steel finish 
    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4"-36 Lower Shaft

    446-6466 Instructions (PDF)

    Note: Steering wheel not included.

  • American Autowire 35775 Chevy Steering Column Wiring Harness Adapter
    American Autowire 35775 Chevy Steering Column Wiring Harness Adapter
    x
                

    These wiring adapters for the stock o/e harness are designed to adapt to an Ididit steering column.  They work with 1955 Chevrolet passenger cars and 1969-74 GM steering columns to stock dash.

    • 1955 Chevrolet Passenger
    • For 1969-74 GM column to stock dash
    • Adapt to an Ididit steering column

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • Painless Wiring 30806 GM Steering Column Conversion Kit
    Painless Wiring 30806 GM Steering Column Conversion Kit
    x
                

    Steering column conversion kit lets you use factory-type connectors on your key-switch-equipped GM-style column. This kit is used to replace worn or damaged connectors on a GM "keyed" steering column, or to adapt some other type of column to a GM style harness. This kit comes with connectors and terminals, you supply the wires.

    Includes:

    • ignition connector
    • turn signal connector
    • dimmer switch connector
    • terminals

    Crimps to YOUR wires.

    GM Steering Column Conversion Instructions (PDF)

  • Ididit 1120550020 1955-56 Chevy Tilt Steering Column, Chrome
    Ididit 1120550020 1955-56 Chevy Tilt Steering Column, Chrome
    x
                Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. These tilt, non-shift columns move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1255C Instructions (PDF)

  • Ididit 1120652010 1955-59 GM Pickup Tilt Steering Column, Plain
    Ididit 1120652010 1955-59 GM Pickup Tilt Steering Column, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets,  tabs and switches. These columns are much cleaner in appearance and  eliminate the column-mounted key switch. These non-shift versions  feature a 2" O.D. column tube. 

    Each has a standard GM 3-7/8" wire harness, 8-position tilt, and accept stock 1955-59 GM pickup steering wheels or our custom wheels with an adapter (sold separately).

    • 8 position tilt
    • Self canceling turn signal
    • 4 way flashers
    • Knobs & Levers
    • 3-7/8" wiring plugs
    • 1" DD lower shaft
    • Includes: floor mount plate with gasket,delrin cover, with under dash column drop for easy installation
Goto Previous PagePrevious Page
1 2 3