Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"hilborn fuel pump" Page 1 of 1

  • Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    x
                

    Hilborn's factory flow-tested mechanical fuel pumps can be used with gas, alcohol or nitro applications. Rotation can be easily reversed to accommodate cam drives or belt drives.

    This billet aluminum pump is almost 1-1/2 lbs. lighter than the cast aluminum model. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings. Includes "Y" fitting which converts one #8 outlet to three #6 outlets. 

    Sizes: #00, #0, #S0, #1/2

    The full range of capacity from size #00 through size #1/2 is from .67gpm to 2.22gpm. All pumps rated at 1800rpm with 50psi. 

     

  • Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    x
                

    The Hilborn direct drive fuel pump has a new billet style rotatable mount. Direct drive and flow-tested. Gives long-lasting, rugged dependability. Convenient quick disconnect. For use with injection or alky carbs. Features hard annodized, aluminum construction. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings.

    All pumps rated at 1800rpm with 50psi. Has one -10 AN inlet and two -6 AN outlets.

  • Hilborn Fuel Injection PG150CS0 Fuel Pump, 1.7 GPM
    Hilborn Fuel Injection PG150CS0 Fuel Pump, 1.7 GPM
    x
                

    The Hilborn direct drive fuel pump has a new billet style rotatable mount. Direct drive and flow-tested. Gives long-lasting, rugged dependability. Convenient quick disconnect. For use with injection or alky carbs. Features hard annodized, aluminum construction. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings.

    All pumps rated at 1800rpm with 50psi. Has one -10 AN inlet and two -6 AN outlets.

  • Hilborn Fuel Injection F1200-12/149 -12 AN Short Fuel Filter
    Hilborn Fuel Injection F1200-12/149 -12 AN Short Fuel Filter
    x
                

    A small, lightweight, in-line fuel filter that weighs under 7 ounces. It will handle flows through Hilborn's #1 size fuel pump. The stainless steel element can be cleaned and never needs replacement.  149 micron for mechanical injection applications. 

    Short body filters with stainless steel elements. AN 12 size is for before the pump. AN 6 size goes after the pump to protect the nozzles.

    Fuel Filter Configuration

    AN Thread Sizing Guide

     

  • Hilborn Fuel Injection END521B-6 Fuel Shut-Off Valve
    Hilborn Fuel Injection END521B-6 Fuel Shut-Off Valve
    x
                      Smallest and lightest on the market, yet flows a full line size.  Mounts direct to Hilborn fuel pump.       
            
  • Hilborn Flathead Ford Mechanical Fuel Injection
    Hilborn Flathead Ford Mechanical Fuel Injection
    x
                

    This Hilborn Mechanical Fuel Injection unit fits the Ford Flathead 239 V8 engine. It comes complete with #6 nozzles and 9" stacks. For use with gasoline. Recommended fuel pump is 150C #0 direct from Hilborn. Fabrication required to drive the fuel pump and for linkage.

    • High quality heat-treated aluminum casting
    • Cad-plated steel ram tubes
    • Fully assembled with shafts, butterflies, nozzles, fuel lines, metering valve, & bypass valve
  • Barnes Systems 9017-3B SBC 3 Stage Dry Sump Pump
    Barnes Systems 9017-3B SBC 3 Stage Dry Sump Pump
    x
                Barnes belt driven pumps are built using only the finest materials and assembled to  exacting tolerances. Unique design makes these pumps the smoothest and  most efficient pumps in the industry. Billet aluminum bodies, large  O.D. spur gears and ball bearings make for a winning combination.

    Fuel pump drive kit allows a Hilborn Waterman, etc. fuel pump to drive off the back of the oil pump.
  • Barnes Systems 9021 Fuel Pump Drive Kit
    Barnes Systems 9021 Fuel Pump Drive Kit
    x
                Fuel  pump drive kit allows a Hilborn Waterman, etc. fuel pump to drive off  the back of the oil pump.
            
  • Speedway Cam-Driven Water Pump Kit
    Speedway Cam-Driven Water Pump Kit
    x
                

    Cam-driven with the shaft protruding through the pump. This unit allows adaptation of Hilborn, Enderle and various other styles of fuel and/or oil pumps for use with direct drive. Works well for a relocated belt driven pump.

    916-15951 Instructions (PDF) 

  • Barnes Systems 91174-C 4 Stage Dry Sump Pump
    $1,249.99
    $1,499.99
    Barnes Systems 91174-C 4 Stage Dry Sump Pump
    x
                Barnes pumps are built using only the finest materials and assembled to exacting tolerances. Unique design makes these pumps the smoothest and most efficient pumps in the industry. Billet aluminum bodies, large O.D. spur gears and ball bearings make for a winning combination.

    Fuel pump drive kit allows a Hilborn Waterman, etc. fuel pump to drive off the back of the oil pump.
  • Barnes Systems 91173-C 3 Stage Cam Drive Pump
    Barnes Systems 91173-C 3 Stage Cam Drive Pump
    x
                Barnes pumps are built using only the finest materials and assembled to exacting tolerances. Unique design makes these pumps the smoothest and most efficient pumps in the industry. Billet aluminum bodies, large O.D. spur gears and ball bearings make for a winning combination.

    Fuel pump drive kit allows a Hilborn Waterman, etc. fuel pump to drive off the back of the oil pump.
  • Hilborn 327C8NA Race Saver Mega Power Small Block Chevy 305 Fuel Injector
    New
    Hilborn 327C8NA Race Saver Mega Power Small Block Chevy 305 Fuel Injector
    x
                Please view the product's page for more information
            
  • Outerwears Pre-Filter for Straight Injector Filter
    Outerwears Pre-Filter for Straight Injector Filter
    x
                Used by racing starts like Sammy Swindell, Joe Gaerte, Danny Lasoski, Steve Kinser and many others. 

    Kinsler injection uses straight
    Hilborn injection uses tapered.

  • K&N Filters RD-4400 Tapered Injection Filter, 2-1/4 Inch
    K&N Filters RD-4400 Tapered Injection Filter, 2-1/4 Inch
    x
                

    Single tapered filter for Chevy with 9" x 5-1/2" oval aluminum top plate. Total height is 6-3/4". Designed for late-style Hilborn tapered model Q with siamese stacks.

  • K&N Filters RD-4200 Tapered Injection Filter, 2-1/8 Inch
    K&N Filters RD-4200 Tapered Injection Filter, 2-1/8 Inch
    x
                

    Single tapered filter for Chevy with 9" x 5-1/2" oval aluminum top plate. Total height is 6-3/4". Designed for late-style Hilborn tapered model R with siamese stacks.

  • K&N Filters RD-4600 Tapered Injection Filter, 2-1/2 Inch
    K&N Filters RD-4600 Tapered Injection Filter, 2-1/2 Inch
    x
                

    Single tapered filter for Chevy with 9" x 5-1/2" oval aluminum top plate. Total height is 6-3/4". Designed for late-style Hilborn tapered model P with siamese stacks.

  • K&N Tapered Injector Air Filter Set, 2-1/8 Inch
    K&N Tapered Injector Air Filter Set, 2-1/8 Inch
    x
                

    These K&N tapered injection filters are designed from late-style Hilborn "tapered" Model R with siamese stacks. Oval aluminum top plate measures 9" x 5-1/2". Total height is 6-3/4".

    • 2-1/8" I.D. flange
    • 2-1/16" injector bore
    • Available in set of four for Chevy
  • K&N Tapered Injector Air Filter Set, 2-1/2 Inch
    K&N Tapered Injector Air Filter Set, 2-1/2 Inch
    x
                

    These K&N tapered injection filters are designed from late-style Hilborn "tapered" Model P with siamese stacks. Oval aluminum top plate measures 9" x 5-1/2". Total height is 6-3/4".

    • 2-1/2" I.D. flange
    • 2-7/16" injector bore
    • Available in set of four for Chevy
  • K&N Tapered Injector Air Filter Set, 2-1/4 Inch
    K&N Tapered Injector Air Filter Set, 2-1/4 Inch
    x
                

    These K&N tapered injection filters are designed from late-style Hilborn "tapered" Model Q with siamese stacks. Oval aluminum top plate measures 9" x 5-1/2". Total height is 6-3/4".

    • 2-1/4" I.D. flange
    • 2-3/16" injector bore
    • Available in set of four for Chevy
  • Outerwears Pre-Filters for Tapered Injection Filters
    Garage Sale
    Outerwears Pre-Filters for Tapered Injection Filters
    x
                

    Pink prefilters are clearance priced.

     

    Used by racing stars like Sammy Swindell, Danny Lasoski, Steve Kinser and many others. Fits Hilborn Injection Siamese stacks.

    Hilborn injection uses tapered.
    Kinsler injection uses straight.

  • Garage Sale - Barnes 4 Stage Dry Sump Pump
    $1,199.99
    $1,449.99
    Garage Sale
    Garage Sale - Barnes 4 Stage Dry Sump Pump
    x
                

    Barnes pumps are built using only the finest materials and assembled to exacting tolerances. Unique design makes these pumps the smoothest and most efficient pumps in the industry. Billet aluminum bodies, large O.D. spur gears and ball bearings make for a winning combination.

    Fuel pump drive kit allows a Hilborn Waterman, etc. fuel pump to drive off the back of the oil pump.

     

    This pump is garage sale priced because it was used on a display and can't be sold as a first.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS