Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"high flow high flow fittings" Page 1 of 10

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • KRC Power Steering 25310000 Pump Flow Control Valve, 2.64 GPM, ID:C
    KRC Power Steering 25310000 Pump Flow Control Valve, 2.64 GPM, ID:C
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • High Flow O-Ring Port Fitting, AN6 Hose, AN10 Port
    High Flow O-Ring Port Fitting, AN6 Hose, AN10 Port
    x
                

    High Flow O-Ring Port Fitting - AN6 Hose, AN10 Port for FUELAB Prodigy pump.

     

  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • KRC 25308000 Pump Flow Control Valve, 2.11 GPM, ID: None, Base Flow
    KRC 25308000 Pump Flow Control Valve, 2.11 GPM, ID: None, Base Flow
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then blue and red anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN female to pus-on style adapter
    • Straight
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Works great with custom fuel lines
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • High Flow O-Ring Fitting, AN6 Hose, AN4 Port
    High Flow O-Ring Fitting, AN6 Hose, AN4 Port
    x
                High Flow O-Ring Fitting, AN6 Hose, AN4 Port
            
  • KRC Power Steering 25305000 Pump Flow Control Valve, 1.32 GPM, ID:5
    KRC Power Steering 25305000 Pump Flow Control Valve, 1.32 GPM, ID:5
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • KRC Power Steering 25309000 Pump Flow Control Valve, 2.37 GPM, ID:B
    KRC Power Steering 25309000 Pump Flow Control Valve, 2.37 GPM, ID:B
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • KRC Power Steering 25311000 Pump Flow Control Valve, 2.90 GPM, ID:D
    KRC Power Steering 25311000 Pump Flow Control Valve, 2.90 GPM, ID:D
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • KRC Power Steering 25307000 Pump Flow Control Valve, 1.84 GPM, ID:7
    KRC Power Steering 25307000 Pump Flow Control Valve, 1.84 GPM, ID:7
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • KRC Power Steering 25304000 Pump Flow Control Valve, 1.05 GPM, ID:4
    KRC Power Steering 25304000 Pump Flow Control Valve, 1.05 GPM, ID:4
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • KRC Power Steering 25306000 Pump Flow Control Valve, 1.58 GPM, ID:6
    KRC Power Steering 25306000 Pump Flow Control Valve, 1.58 GPM, ID:6
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • KRC Power Steering 25312000 Pump Flow Control Valve, 3.17 GPM, ID:E
    KRC Power Steering 25312000 Pump Flow Control Valve, 3.17 GPM, ID:E
    x
                

    All KRC power steering pumps provide the racer the ability to fine tune the feel and assist in the power steering system. Interchanging the -6 outlet fitting can alter the steering input the drive has. The more flow your steering system receives the easier it will be to turn the wheels, but will decrease feel. Having less flow will put feel and stability back in the steering system, but decrease assist. 

    Note: KRC Flow Valve fittings allow for flow from 1.05 GPM to 3.17 GPM. The 1.05 GPM valve has the least flow, which provides the lowest assist with the highest feel to the steering. The 3.17 GPM valve has the highest flow, which provids the highest assist with the lowest feel to the steering.

    How To Choose the Right Flow Valve (PDF)

    Flow Valve Installation Guide (PDF)

  • High Flow O-Ring Port Fitting, AN4 Hose, AN10 Port
    High Flow O-Ring Port Fitting, AN4 Hose, AN10 Port
    x
                High Flow O-Ring Port Fitting, AN4 Hose, AN10 Port
            
  • Aeromotive 12301 10 Micron Red High Flow Fuel Filter, ORB-10 Ports
    Aeromotive 12301 10 Micron Red High Flow Fuel Filter, ORB-10 Ports
    x
                

    Engineered to support 200-3000 HP, these Aeromotive high flow fuel filters are an inexpensive insurance policy to protect your investment. Filters measure 5.5" long and 2" diameter. Contains -10 AN port fittings on the inlet and outlet. Machined from 6061-T6 aircraft aluminum and anodized for a corrosion resistant show car quality appearance. Ideal for carburetion or fuel injection up to 150psi.

    • High-flow, 10-micron fabric (fine) replaceable element 
    • Flows 2,000 lb/hr with a pressure drop of less than 1 PSI
    • Compact size: 5.5” long x 2” diameter
    • All filter assemblies feature an O-ring for positive sealing in high pressure applications
    • CNC-machined from 6061-T6 aircraft aluminum
    • Bright dip red anodized finish for a corrosion resistant, show car quality appearance

    Note: 10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor. Fabric elements not suitable for use in E85 or alcohol applications.

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Black Anodized, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow push-on hose ends and see the difference.

    • -6 AN female to push-on style adapter
    • Straight
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Works great for custom fuel lines
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Nickel, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Nickel, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 10