Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"heavy duty water pump" Page 1 of 2

  • Flex-a-lite Heavy Duty Steel Cooling Fan
    Flex-a-lite Heavy Duty Steel Cooling Fan
    x
                

    Heavy duty fan recommended for stock cars. Moves the maximum amount of air for the best cooling. Steel blades, non-flex design.

    Available in 15", 17", 18" or 19" diameters.

    910-1575 Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Speedway 30% Reduction Pulley Combo for S/B Chevy Short Pump
    Speedway 30% Reduction Pulley Combo for S/B Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove cast aluminum water pump pulley, crank pulley, and a matched pair of heavy duty belts. Slows water pump speed by 30% for increased horsepower.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove water pump pulley and double groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with either a 5/8" or 3/4" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Short Heavy Duty Aluminum Water Pump
    Small Block Chevy Short Heavy Duty Aluminum Water Pump
    x
                This super heavy duty race water pump features additional casting designs for more strength and reinforcement, plus a 3/4" fan pilot shaft and super duty bearing. It has 1/2" NPT threaded outlets on both the top and side, plus a 3/16" steel rear plate. It weighs 7-3/4 lbs.
    • 3/4" fan snout
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Threaded for adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow and pressure

    910-15581 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • 1949-53 Flathead Car/Pickup Water Pump with Wide Belt
    1949-53 Flathead Car/Pickup Water Pump with Wide Belt
    x
                

    Original flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems.

    Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 3/4" shaft, making the assembly exceptionally strong and more efficient.

    Note: This water pump is for 1949-1953 engines in 1948-1952 pickups or 1932-1948 cars.

    • Flathead Water Pump Features (Link)
    • Designed for use with 5/8" belt drive system
    • Severe-duty roller and ball bearings
    • Ceramic seals on sturdy 3/4" shaft
    • High-flow modular impeller reduces cavitation
    • Includes gasket and a connection for the heater hose return

    1949-1953 Flathead Water Pump Installation Instructions (PDF)

  • AFCO Small Block Chevy Heavy Duty Adj. Aluminum Short Water Pump
    AFCO Small Block Chevy Heavy Duty Adj. Aluminum Short Water Pump
    x
                

    This adjustable pump has standard features that are only available on water pumps costing twice as much. 

    • 3/4" fan snout
    • Extra thick fan hub
    • Fan hub press fit and set screw retained
    • 3/4" ultry duty bearings
    • Adjustable cam stop
    • Adjustable mounting holes
    • Equal flow to both cylinder banks
    • Precision impeller

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Reduction Pulley Combo for Small Block Chevy Long Pump
    Reduction Pulley Combo for Small Block Chevy Long Pump
    x
                

    Combo includes cast aluminum double-groove aluminum water pump pulley, crank pulley, and matched pair of heavy duty belts. Slows water pump speed by 20% for increased horsepower.

    For Small Block Chevy V8s with '69-'86 long style water pumps with 5/8" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • 1937-48 Flathead Stock-Style Water Pump with Wide Belt
    1937-48 Flathead Stock-Style Water Pump with Wide Belt
    x
                Original Flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems. 

    Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 5/8" shaft, making the assembly exceptionally strong and more efficient. All mounting areas are spot faced for improved fit and sealing.

    • All-new high-nickel iron castings
    • Severe-duty roller and ball bearings
    • Ceramic seals on sturdy 3/4" shaft
    • High-flow modular impeller reduces cavitation
    • Gaskets included
    • For systems with 5/8" drive belts

    Factory replacement for 1937-1948 Ford and Mercury cars and trucks. Includes gaskets.

    Water Pump Features (GIF)

    910-15593 Instructions (PDF)

  • Flex-a-lite Heavy Duty Aluminum Cooling Fan
    Flex-a-lite Heavy Duty Aluminum Cooling Fan
    x
                

    Heavy duty fan recommended for stock cars. Moves the maximum amount of air for the best cooling.  Available in 15", 17", 18" or 19" diameters. Aluminum blades, non-flex design.  

    • Center hole is .624 or approximately 5/8"
    • Slotted 4 bolt pattern at opposing slots measures 1.428" to 2.672"

    Flex-a-lite Fan Installation Instructions (PDF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance

  • Speedway 1:1 Pulley Combo for Small Block Chevy Long Water Pump
    Speedway 1:1 Pulley Combo for Small Block Chevy Long Water Pump
    x
                

    Kit includes a cast aluminum double groove water pump pulley and double groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.

    Fits Small Block Chevy V8 with '69-'86 long-style water pump.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

     

  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Ford 302/351W High Performance Aluminum Short Water Pump
    Ford 302/351W High Performance Aluminum Short Water Pump
    x
                

    Each aluminum pump is manufactured from T6 aluminum and features a revised impeller entry with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation.

    • Fan hub has a 1-3/4" bolt pattern
    • The lower hose comes out on the driver's side and uses a 1-3/4" lower hose

    Includes a heavy duty bearing and 3/4" shaft and pulley snout; and 1/2" NPT hole on the passenger side (for heater hose) and on the top (for by-pass hose). Thicker (0.100") stamped steel rear plate. Weighs 6 lbs.

    Ford 302/351W Water Pump Installation Instructions (PDF)

  • 1937-48 Flathead Stock-Style Water Pump W/ Wide Belt, Polished
    1937-48 Flathead Stock-Style Water Pump W/ Wide Belt, Polished
    x
                Original Flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems. 

    Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 3/4" shaft, making the assembly exceptionally strong and more efficient. All mounting areas are spot faced for improved fit and sealing.

    Factory replacement for 1937-1948 Ford and Mercury cars and trucks. Includes gaskets.

    • Polished finish
    • Severe-duty roller and ball bearings
    • Ceramic seals on sturdy 3/4" shaft
    • High-flow modular impeller reduces cavitation
    • Gaskets included
    • For systems with 5/8" drive belts

    Water Pump Features (GIF)

  • Speedway Reduction Pulley Combo for Small Block Chevy Short Pump
    Speedway Reduction Pulley Combo for Small Block Chevy Short Pump
    x
                Please view the product's page for more information
            
  • Big Block Chevy Short Aluminum Water Pump
    Big Block Chevy Short Aluminum Water Pump
    x
                

    Our B/B Chevy water pumps feature a CNC machined iron impeller, ribbed aluminum housing, and a heavy duty bearing assembly. These mechanical pumps flow up to 35% more coolant than stock pumps. Plus, these aluminum pumps weigh less than half than the stock pump and require less power to operate.

    • T6 aluminum
    • Features an impeller with curved vanes for maximum flow, pressure, and equal distribution to both sides of the block
    • Unique seal assembly for leak proof operation
    • 3/4" bearing

    910-15588 Instructions (PDF)

    Note: Clearance from back of pump to engine block mount is .75" May interfere with some 8" balancers. Fan hub drilled for 1-3/4" and 2-1/8" bolt patterns.

  • Speedway Small Block Chevy Short Steel Water Pump
    Speedway Small Block Chevy Short Steel Water Pump
    x
                Our 100% new, pressure cast & CNC machined pumps feature characteristics often overlooked by other manufacturers - precision-ground hubs to eliminate vibration; heavy duty ball-roller or ball-ball bearings; ceramic seal assemblies for extended life; closed-vane impellers for unsurpassed output; and zinc-coated backplates to stand up to corrosion. 

    "Short" style pumps came on all factory small block V8s from 1955 to 1968. However, this pump will fit all S/B Chevys up to 1985.

    NOTE: This pump is designed primarily for street use and should not exceed 5,500 RPM.

    Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • 1949-53 Flathead Polished Aluminum Water Pumps
    1949-53 Flathead Polished Aluminum Water Pumps
    x
                

    Same great quality, now in show polished aluminum!

    Original Flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems.

    Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 5/8" shaft, making the assembly exceptionally strong and more efficient.

    Works with 5/8" belts. Includes mount gaskets.

  • 1949-53 Flathead Car Water Pump with Double Narrow Belts
    1949-53 Flathead Car Water Pump with Double Narrow Belts
    x
                

    Original Flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems.

    Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 3/4" shaft, making the assembly exceptionally strong and more efficient.

    • Ceramic seals on sturdy 3/4" shaft
    • High-flow modular impeller reduces cavitation
    • Gasket included
    • Passenger side pump includes threaded boss for heater hose connection
    • Driver side pump does not have heater hose connection

    Fits 1949-1953 Ford cars and 1952-1953 Mercurys with 3/8" belt system. Also fits 1953 F-100 Pickups.

    Speedway Water Pump Features (GIF)

    Flathead Water Pump Installation Instructions (PDF)

  • 1949-53 Flathead Car Water Pump with Wide Belt
    1949-53 Flathead Car Water Pump with Wide Belt
    x
                Original Flathead water pumps have always suffered from unreliable bronze bushings and carbon seals. They almost always leaked and even Ford manuals warned mechanics not to tighten fan belts too tight. The excess slack allowed belts to slip and lose contact with the generator and water pump pulleys, causing more cooling and power problems. 

    Speedway's completely new water pumps feature severe-duty roller and ball bearings, close tolerances and modular impellers to provide maximum flow and reduce cavitation. They also have modern ceramic seals on a heavy duty 5/8" shaft, making the assembly exceptionally strong and more efficient. Gaskets included.

    1949-1953 Flathead Water Pump Instructions (PDF)

  • GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • AFCO Cast Pulley Combos for Small Block Chevy Long Pumps
    AFCO Cast Pulley Combos for Small Block Chevy Long Pumps
    x
                
    • Double-groove water pump pulley
    • Double-groove crank pulley
    • Matched pair of heavy duty belts
    • 20% reduction

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • AFCO Cast Pulley Combos for Small Block Chevy Short Pumps
    AFCO Cast Pulley Combos for Small Block Chevy Short Pumps
    x
                
    • Double-groove water pump pulley
    • Double-groove crank pulley
    • Matched pair of heavy duty belts
    • 20% reduction

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • LSX/Vortec Water Pump, Cast Aluminum
    LSX/Vortec Water Pump, Cast Aluminum
    x
                

    Designed specifically for the GM LS Gen III/IV engines, these high flow aluminum pumps are engineered to deliver a faster, higher volume flow of water. Pressure-injected, aluminum alloy pump bodies significantly improve cooling for any street, high performance, or racing application. Featuring a precision cast-iron impeller design and pressure-balanced water passages, these "super pumps" equalize flow and minimize engine hot spots at any speed.

    • Fits 1997-2003 engines
    • 8-hole billet steel hub
    • Heavy-duty 0.750" shaft
    • Shielded-sealed roller ball bearings
  • LSX/Vortec Water Pump, Polished Aluminum
    LSX/Vortec Water Pump, Polished Aluminum
    x
                

    Designed specifically for the GM LS Gen III/IV engines, these high flow aluminum pumps are engineered to deliver a faster, higher volume flow of water. Pressure-injected, aluminum alloy pump bodies significantly improve cooling for any street, high performance, or racing application. Featuring a precision cast-iron impeller design and pressure-balanced water passages, these "super pumps" equalize flow and minimize engine hot spots at any speed.

    • Fits 1997-2003 engines
    • 8-hole billet steel hub
    • Heavy-duty 0.750" shaft
    • Shielded-sealed roller ball bearings
  • Walker B-Z-Ac487-2 Z-Series 30-31 Model A Radiator/Condser Ford Engine
    Walker B-Z-Ac487-2 Z-Series 30-31 Model A Radiator/Condser Ford Engine
    x
                Please view the product's page for more information
            
  • Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-Ac497-1 Cobra Ford 39 DL/40 All Radiator/Condser Ford V8
    Walker B-C-Ac497-1 Cobra Ford 39 DL/40 All Radiator/Condser Ford V8
    x
                Please view the product's page for more information
            
  • Walker B-Z-495-1 Z-Series 1937-1939 Ford Engine Standard Radiator
    Walker B-Z-495-1 Z-Series 1937-1939 Ford Engine Standard Radiator
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Use Walker Fan Shroud Style E

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker B-C-Ac491-2 Cobra 1932 Ford Engine Radiator w/ AC Condenser
    Walker B-C-Ac491-2 Cobra 1932 Ford Engine Radiator w/ AC Condenser
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selec

  • Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your v

  • Walker B-C-Ac487-2 Cobra 1930-31 Model A Radiator/Condser Ford Engine
    Walker B-C-Ac487-2 Cobra 1930-31 Model A Radiator/Condser Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

  • Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-Z-497-1 Z-Serie 39 DL, 40-41 Ford Pickup Radiator-Ford Engine
    Walker B-Z-497-1 Z-Serie 39 DL, 40-41 Ford Pickup Radiator-Ford Engine
    x
                Please view the product's page for more information
            
  • Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    S/B Ford engines can take advantage of less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by

  • Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    x
                Please view the product's page for more information
            
  • Walker B-C496-1 Cobra 1941 Ford Deluxe Radiator for Ford Engine
    Walker B-C496-1 Cobra 1941 Ford Deluxe Radiator for Ford Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2