Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"heads big block" Page 1 of 7

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • High temp black paint finish
    • Includes bolts and gaskets
    • Note: This header actually goes upward from the head instead of down before dropping over the frame rails. From the top of the head flange to the top of the tubes is approximately 9-1/2". 

    Header Dimensions (GIF)

  • Big Block Chevy Header Kit
    $145.99
    Product Rating: 5.00 Stars
    Big Block Chevy Header Kit
    x
                These B/B Chevy (BBC) headers feature 18 gauge mild steel designed for many racing and rodding applications. Cutting, fitting and welding required.  Has a 2" tube and 3-1/2" collector.

    Kit includes eight mandrel-bent primary tubes,  two pre-formed collectors, two extra-thick oval port flanges, two gaskets and twelve header bolts.
  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. These headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers. Plus, the AHC ceramic coating provides additional horsepower gains along with decreased heat soak of other engine components.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Polished ceramic coated finish
    • Includes bolts and gaskets

    Header Dimensions

  • Dynatech Big Block Chevy Exhaust Header Flange, 2.125 Inch Port, 5/16 Inch Thick
    Dynatech Big Block Chevy Exhaust Header Flange, 2.125 Inch Port, 5/16 Inch Thick
    x
                

    A great exhaust system starts at the beginning - the flange and gaskets.  One of Dynatech®'s biggest advantages is the wide selection of port matched flanges.  All of Dynatech's flanges are CNC laser machined for unparalleled quality and fit.

    • CNC laser machined
    • For BBC
    • 2.125" port / 2.224" X,Y / 5/16" thick
    • Sold each
  • Dynatech Big Block Chevy Exhaust Header Flange, 2.375 Inch Port, 3/8 Inch Thick
    Dynatech Big Block Chevy Exhaust Header Flange, 2.375 Inch Port, 3/8 Inch Thick
    x
                

    A great exhaust system starts at the beginning - the flange and gaskets.  One of Dynatech®'s biggest advantages is the wide selection of port matched flanges.  All of Dynatech's flanges are CNC laser machined for unparalleled quality and fit.

    • CNC laser machined
    • For BBC
    • 2.375" port / 2.476" X,Y / 3/8" thick
    • Sold each
  • Big Block Chevy, Block Hugger, Tight-Fit Headers, AHC Coated
    Big Block Chevy, Block Hugger, Tight-Fit Headers, AHC Coated
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy shorty headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These block hugger headers make difficult installations easy. These shorty headers are ceramic coated headers.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimesnions (GIF)

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Chrome
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Chrome
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Chrome plated finish
    • Includes bolts and gaskets

    Header Dimensions (GIF)

    Note: This header actually goes upward from the head instead of down before dropping

  • Big Block Chevy Tight-Fit Block Hugger Headers, Stainless
    Big Block Chevy Tight-Fit Block Hugger Headers, Stainless
    x
                Please view the product's page for more information
            
  • Dynatech Big Block Chevy Exhaust Header Flange, 2-1/4 Inch Port, 3/8 Inch Thick
    Dynatech Big Block Chevy Exhaust Header Flange, 2-1/4 Inch Port, 3/8 Inch Thick
    x
                

    A great exhaust system starts at the beginning - the flange and gaskets.  One of Dynatech®'s biggest advantages is the wide selection of port matched flanges.  All of Dynatech's flanges are CNC laser machined for unparalleled quality and fit.

    • CNC laser machined
    • For BBC
    • 2.25" port / 2.35" X,Y / 3/8" thick
    • Sold each
  • Dynatech Big Block Chevy Exhaust Header Flange, 2-1/2 Inch Port, 3/8 Inch Thick
    Dynatech Big Block Chevy Exhaust Header Flange, 2-1/2 Inch Port, 3/8 Inch Thick
    x
                

    A great exhaust system starts at the beginning - the flange and gaskets.  One of Dynatech®'s biggest advantages is the wide selection of port matched flanges.  All of Dynatech's flanges are CNC laser machined for unparalleled quality and fit.

    • CNC laser machined
    • For BBC
    • 2.50" port / 2.6" X,Y / 3/8" thick
    • Sold each
  • EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    x
                

    This is a stock adapter with a bypass built into it. Replacement for stock oil filter adapter. Fits Small Block Chevy, Big Block Chevy, and early model 4.3L V6. Replaces GM part number 3952301. Includes two 5/16"-18 x 1" socket head cap screws.

    Bolts directly to the block without a gasket.

  • Dynatech   Big Block Chevy Steel Header Flange, 2.224 Port, 5/16 Inch Thick
    Dynatech Big Block Chevy Steel Header Flange, 2.224 Port, 5/16 Inch Thick
    x
                

    A great exhaust system starts at the begining - the exhaust manifold flange.  One of Dynatech®s biggest advantages is the wide selection of port machined flanges. All the header flanges are CNC laser machined for unparalleled quality and fit.

    1. Flanges are sold individually.
    2. Use with Fiber Gaskets.

    Fits Big Block Chevrolet heads.

  • ARP 135-3603 Big Block Chevy w/Iron and Aluminum Dart Hex Cylinder Head Bolts
    New
    ARP 135-3603 Big Block Chevy w/Iron and Aluminum Dart Hex Cylinder Head Bolts
    x
                

    High Performance head bolts are available with a reduced wrenching hex or 12-point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing.  All High Performance Series bolts are 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.  Fits 396, 402, 427 and 454 B/B Chevy with Iron & Aluminum Dart and other raised runner cylinder heads.

    • Big Block Chevy
    • Fits Flo Tech aluminum heads and others with raised runners
  • Big Block Chevy Lake Style Headers, Stainless Steel
    New
    Big Block Chevy Lake Style Headers, Stainless Steel
    x
                Please view the product's page for more information
            
  • Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head with a standard exhaust port design.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Five angle valve job
    • Bronze guides
    • Straight plug
    • 3/8" screw-in studs and guide plates
    • Port for temperature probe
    • Works well with most flat tappet street cams

    Flow Numbers:

    • Valve Lift     .400"     .500"     .600"
    • Intake           206       237       244   
    • Exhaust        165       177       187
  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • Big Block Chevy Block Hugger Tight-Fit Headers, Plain
    Big Block Chevy Block Hugger Tight-Fit Headers, Plain
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy tight-fit headers are designed for applications where space is limited. The shorty headers offer great flow in a compact package and will fit where many other block hugger headers won’t.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimensions (GIF)

  • Big Block Chevy Lake Style Header Kit, 1-7/8 Tube, 4 Inch Cone
    Big Block Chevy Lake Style Header Kit, 1-7/8 Tube, 4 Inch Cone
    x
                

    Vintage style street rods are hotter than ever, and nothing gives your fenderless rod an authentic dry lakes competition look like a set of lakester headers. These lake style header kits allow you to build your own headers and tailor them to your vehicle. Lakester header kit includes parts to complete both sides.

    The kits include flange plates, pre-bent tubing, collector plates, block-off plates, gaskets, bolts and flanges for connecting an under-car exhaust system. Big block kits have 1-7/8" primaries. All tubing comes pre-bent. The 30" tapered cones can be trimmed as needed.

  • Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/16” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • 1-5/16" square ports
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Includes (1) left and (1) right side manifold
    • Gaskets and bolts/hardware are not included
  • Big Block Chevy Header Flange Plates
    Big Block Chevy Header Flange Plates
    x
                

    Build or modify your own headers with these exhaust manifold flange plates. Header flange only. Does not include adaptor pipe or gaskets.

    • Approximately 3/8” thick
    • 2" Round port design

     

  • Big Block Chevy Lake Style Header Kit, 1-7/8 Tube, 3-1/2 Inch Cone
    Big Block Chevy Lake Style Header Kit, 1-7/8 Tube, 3-1/2 Inch Cone
    x
                

    Vintage style street rods are hotter than ever, and nothing gives your fenderless rod an authentic dry lakes competition look like a set of lakester headers. These lake style header kits allow you to build your own headers and tailor them to your vehicle. All tubing comes pre-bent. Tapered cones can be trimmed as needed. Lakester header kit includes parts to complete both sides.

    • 5/16" thick flanges
    • 16 ga. pre-bent tubing
    • Collector flanges w/ block-off plates
    • Flanges for connecting an under-car exhaust system (2" O.D.)
    • Gaskets & bolts
    • 1-7/8" primaries
    • 22.50" x 3-1/2" cones
  • Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy tight-fit headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These shorty headers make difficult installations easy.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

  • Big Block Chevy Lake Style Headers, Plain Steel Finish
    Big Block Chevy Lake Style Headers, Plain Steel Finish
    x
                

    Give your street rod a nostalgia look and help uncork its performance potential with these lakester headers for big-block Chevy V8s. The lakester header works great on early hoodless and fenderless rods like T-buckets, Model A's and 1932-1934 Fords. Vertical flanges allow you to connect the lake style headers to a muffled under-car exhaust when the end plates are on.

    • Fits 396-502 B/B Chevy
    • Hookups provided for under-chassis exhaust (2-1/2" O.D.)
    • Block-off plate allows you to easily uncork headers
    • 1-7/8" primaries, 4" collectors

    Header Dimensions (GIF)

    NOTE: Turn-outs NOT included. Headers come with end plates, but the turn outs are sold seperately.

     

  • Fel-Pro Gaskets 1410 Big Block Chevy Exhaust Header Gaskets
    Fel-Pro Gaskets 1410 Big Block Chevy Exhaust Header Gaskets
    x
                Fel-Pro Blue Stripe premium quality BB Chevy exhaust gaskets for use with headers. Fits stock cast iron & early aluminum heads with square exhaust ports.
            
  • 1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    x
                

    Classic Chevy owners will love these 396-502 big block V8 chassis headers for 1955-1957 cars. They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance. Requires aftermarket side engine mounts and a rear trans crossmember (rather than stock bellhousing mounts).

    • Mid-length design offers maximum ground clearance, even if car is lowered 4"
    • Works with automatic transmissions only
    • Designed to work with stock steering or 605 power steering box
    • Original bellhousing frame mounts must be removed
    • Will NOT work if engine is set forward more than 3/4" for firewall/HEI distributor clearance
    • Will NOT fit tall-deck (truck) blocks
    • Header Dimensions (GIF)

    Note: These headers will not work with manual transmissions due to clutch linkage issues.

  • ARP Fasteners 200-2902 Chevy Flexplate Bolts
    ARP Fasteners 200-2902 Chevy Flexplate Bolts
    x
                

    Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-Pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flexplate register
    • Originally developed for NASCAR Winston Cup competition
    • 200,000 psi rating
  • ARP Fasteners 200-2802 Chevy Flywheel Bolts
    ARP Fasteners 200-2802 Chevy Flywheel Bolts
    x
                

    Flywheel bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flywheel register
    • Originally developed for NASCAR Winston Cup competition
    • Has a 200,000 psi rating
  • Big Block Mopar Header Flange
    Big Block Mopar Header Flange
    x
                

    Build or modify your own headers with these exhaust manifold flange plates. Header flange only. Does not include adaptor pipe or gaskets. Port size is 1-5/8" x 1-3/8".  5/16" Thick.

    This flange set is for Chrysler engines such as 361-383-400 & 440.

  • Speedway Chevy Mini Starter, 1.4 kW, Plain
    Speedway Chevy Mini Starter, 1.4 kW, Plain
    x
                High-torque, 1-1/2 HP high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines. 

    Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. 

    910-67440 Instructions (PDF)

  • Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    x
                
    •  2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 305-505 Big Block Chevy Complete Aluminum Cylinder Head, 320cc
    Flo-Tek 305-505 Big Block Chevy Complete Aluminum Cylinder Head, 320cc
    x
                
    • Stainless swirl polished valves  
    • 2.250” intake valve, 1.880” exhaust
    • 320cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • High performance springs (.600 lift hyd flat tappet)
    • PC seals
    • Hardened locks and retainers
    • 7/16” screw-in studs and guideplates
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 306-500 Big Block Chevy Aluminum Cylinder Head, 320cc, Bare
    Flo-Tek 306-500 Big Block Chevy Aluminum Cylinder Head, 320cc, Bare
    x
                
    • 2.250” intake valve, 1.880” exhaust
    • 320cc intake runners
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 407-505 Big Block Chevy Complete Aluminum Cylinder Head, 360cc
    Flo-Tek 407-505 Big Block Chevy Complete Aluminum Cylinder Head, 360cc
    x
                
    • Stainless swirl polished valves  
    • 2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • High performance springs (.600 lift hyd flat tappet)
    • PC seals
    • Hardened locks and retainers
    • 7/16” screw-in studs and guideplates
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Offenhauser Finned Oil Filter Cover, Polished Aluminum
    Offenhauser Finned Oil Filter Cover, Polished Aluminum
    x
                

    This finned aluminum cover slides over a stock filter to add a little something extra to your engine compartment. A slit on one side has an allen head cross bolt that clamps the cover onto the oil filter (similar to a hose clamp).

    Fits most standard-sized filters on Ford,GM, and Chrysler vehicles (full-sized V8s). Vertical fins on one side only.

    • Polished aluminum 
    • Finned style
    • Works with stock oil filter
    • Attaches with cross bolt clamp
    • Standard V8 Ford, GM, Chrysler
  • Clay Smith Hydraulic Roller Cam / Lifter Kit, 292/302 Big Block Chevy 496
    Clay Smith Hydraulic Roller Cam / Lifter Kit, 292/302 Big Block Chevy 496
    x
                

    These camshaft / lifter kits are perfect for use with BBC 477 to 496 with 4.25" stroke with OEM 188 or 990's ProMaxx or RHS 320s. Max rpm 5800-6200. For those of you that go old school and want to use the legendary GM Square Ports this is your cam. Welcome to the brotherhood of BBC that make 600HP and 600#/ft. on pump gas! This cam will also work with the listed aftermarket aluminum heads. Single plane intake would be your best choice, and you will not sacrifice any torque. Carb of choice is a 950HP 4150. 2" headers are recommended. Be sure to have the car washed because when you pull into cruise night everybody will turn their heads. Will show no mercy on manual transmission. Good with power brakes. 850 Idle RPM

    • Adv. - 292 / 302
    • .050" - 233 / 243
    • .200" - 152 / 158
    • Lift - .620 / .600
    • Centerlines - 103 / 111
    • Lobe Sep. - 107
    • Includes a set of tie-bar style hydraulic roller lifters
  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Dynatech   794-50001 B/B Chevy Fiber Exhaust Header Gaskets
    Dynatech 794-50001 B/B Chevy Fiber Exhaust Header Gaskets
    x
                

    These Dynatech® header exhaust gaskets are manufactured at the highest quality for racing and high performance applications. They are CAD designed for the most precise fit possible.  Fits Big Block Chevy 396-454 V-8 engines. 

    Sold in pairs.

  • 429-460 Big Block Ford Header Kit
    429-460 Big Block Ford Header Kit
    x
                

    Save money by welding and assembling your own headers! This B/B Ford V8 header kit will work for many racing and rodding applications. It includes everything you need to assemble a pair of high-quality headers.

    • 2" primaries
    • 3-1/2" collectors
    • (8) 18-gauge mild steel 2" mandrel-bent primary tubes
    • (2) Pre-formed 3-1/2" collectors
    • (2) Extra-thick standard-port 5/16" flanges
    • (2) Gaskets
    • Header bolts

    Designed for the seasoned, hands-on enthusiast, the kit will require some cutting, fitting and welding.

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, AHC Ceramic Coated
    1955-57 Big Block Chevy 396-502 Chassis Headers, AHC Ceramic Coated
    x
                

    Classic Chevy owners will love these big block V8 chassis headers for 1955-1957 cars.  They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance.  The manufacturer says that they won't work with manual transmissions due to clutch linkage issues!  These headers are finished with our Armor Hot Coating.

    • Quality steel construction
    • Mid-length design offers maximum ground clearance, even if car is lowered 4"

     

  • Book - How To Build Big-Inch Ford Small Blocks
    Book - How To Build Big-Inch Ford Small Blocks
    x
                Have you been dreaming about a little extra displacement for your Ford? By increasing the bore and stroke of your current engine, you can add those cubic inches without the hassle of switching to a big block. 
    George Reid thoroughly explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole. With this information, you’ll be better able to tailor your heads, cam, intake manifold, carburetor, and exhaust system to get the most out of the extra cubes.
    Also included in this engine building book is a complete guide to factory head and block castings, as well as aftermarket block and head guides, so you can choose exactly the right parts for your project. This book is the definitive guide for building a big-inch Ford small block, complete with four engine buildups ranging from 331 to 408 cubic inches.
Goto Previous PagePrevious Page
1 2 3 4 5 6 7