Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"hans post anchor" Page 1 of 1

New (0)

Garage Sale (0)

  • HANS AK1132-22 Sport Series Post Anchor Kit
    HANS AK1132-22 Sport Series Post Anchor Kit
    x
                
    • Set of two standard HANS post anchors.
    • Attaches one HANS Device to one helmet. 
    • As fitted standard on all Sport kits.

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.



     

  • Hans Device SAH Post & Anchor Kit
    Hans Device SAH Post & Anchor Kit
    x
                SAH Post & Anchor Kit
            
  • HANS Pro Series Post Anchor Kit
    HANS Pro Series Post Anchor Kit
    x
                
    • Set of two professional HANS helmet anchors.
    • As furnished with all professional HANS Devices.
    • Converts one helmet for use with a HANS Device.
    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

     

  • HANS NAK12044-31 Adjustable Hans Device-Post Anchor, Large, No Anchors
    HANS NAK12044-31 Adjustable Hans Device-Post Anchor, Large, No Anchors
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car. These anchor-free kits allow you to save big by utilizing your existing Hans helmet anchors! 
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Accepts Post Anchor clips
    • Post Anchors NOT included
    • Weight: 970 grams
    • Size: Large

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS NAK12034-31 Medium Adjustable Hans Device-Post Anchor, No Anchors
    HANS NAK12034-31 Medium Adjustable Hans Device-Post Anchor, No Anchors
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car. These anchor-free kits allow you to save big by utilizing your existing Hans helmet anchors! 
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Accepts Post Anchor clips
    • Anchors NOT included
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

  • HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
    HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
    x
                

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

  • HANS Device Sport I Post & Anchor Sliding Tether, Professional
    HANS Device Sport I Post & Anchor Sliding Tether, Professional
    x
                
    • Replacement sliding tether for post anchor and post collar type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Shorter 17" length preferred by some smaller drivers and some using smaller size devices
    • All tether lengths offer the same level of protection
  • HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
    HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
    x
                

    The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technology increases speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    QuickStart Guide (PDF)

    Anchor Instructions (PDF)  

  • HANS DK11341-321 Pro Series Device, Post Anchors, 30 Degree Large
    HANS DK11341-321 Pro Series Device, Post Anchors, 30 Degree Large
    x
                

    The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technology increases speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    QuickStart Guide (PDF)

    Anchor Instructions (PDF)  

  • HANS DK 13235-32 SFI Hans Device Pro SA 20  Medium Post Anchor
    HANS DK 13235-32 SFI Hans Device Pro SA 20 Medium Post Anchor
    x
                Featuring light weight and a low collar, the HANS Pro Ultra provides the  same protection as the HANS Professional used worldwide by drivers in  major racing series since 2001. Made from carbon fiber, the new HANS Pro  Ultra carries a feather graphic on the new style collar signifying its  low weight.
    • Hand made with high modulus carbon fiber
    • Hollow core reduces weight, weighs about 1 pound
    • Provides the same protection as the HANS Professional
    • Allows easier entry and exit from cockpit
    • Higher epaulets for improved function with safety harness
    • SFI 38.1 and FIA approved
    • SA version includes helmet anchor backing nuts and wrench
    • Post anchors
    • Sliding tether
    • 20 degree layback
    • Medium

    Hans Device Sizing Chart (Link)

    HANS Quick Start Guide (PDF) 

  • HANS Device Post And Anchor Sliding Tether, Sport II
    HANS Device Post And Anchor Sliding Tether, Sport II
    x
                
    • Replacement sliding tether for post anchor and post collar type of helmet anchors
    • Includes 2 tether carriers and 4 screws
    • 3 lengths: Short 17", Standard 18", Long 19"
    • Shorter 17" / 425mm length preferred by some smaller drivers and some using smaller size devices
    • All tether lengths offer the same level of protection
  • HANS DK12034-321 Adjustable Hans Device, Post Anchor, SA, Medium
    HANS DK12034-321 Adjustable Hans Device, Post Anchor, SA, Medium
    x
                The HANS Adjustable™ provides award-winning HANS performance in any type of car.
    • Adjustable angle from 10 to 40 degrees fits all types of cars and seats
    • Easy to adjust in 5 degree increments – providing more comfort
    • Sliding tether
    • Post Anchor clips
    • SA hardware (Nutwashers included with SA hardware)
    • Weight: 970 grams
    • Size: Medium

    Frequently Asked Questions (PDF)

    Altering The Angles (PDF)

     

  • HANS STC1121S Post Anchor Sliding Tether Upgrade Kit
    HANS STC1121S Post Anchor Sliding Tether Upgrade Kit
    x
                Converts one HANS Device with fixed post anchors to sliding tether Vision Advantage PLUS. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

  • HANS DK11212-411 Hans Device Sport-20   Super Small QC-Sliding SAH
    HANS DK11212-411 Hans Device Sport-20 Super Small QC-Sliding SAH
    x
                

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    •   This is SFI 38.1

    The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but

  • HANS TU11411 Hans Device Tether Upgrade
    HANS TU11411 Hans Device Tether Upgrade
    x
                
    • Fits all Hans devices
    • Sliding tether upgrade with standard post collar anchors.
    • Comes with all parts to convert one SAH helmet and one HANS Device.
    • Standard 18"/450cm tether length.
  • HANS TK1132QD Quick Disconnect Fixed Length Tether
    HANS TK1132QD Quick Disconnect Fixed Length Tether
    x
                Replacement fixed Quick Disconnect tethers for Post Anchor helmet attachments. Includes two tethers and two loops. 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.