Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"grand national seals" Page 1 of 3

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Grand National Snout Hub Inner Seal, 1.375 x 1.875 Inch
    Grand National Snout Hub Inner Seal, 1.375 x 1.875 Inch
    x
                Replacement seal for your GN hubs and axle housing snouts.
            
  • Winters Performance 7271 Grand National Snout Seal
    Winters Performance 7271 Grand National Snout Seal
    x
                2-1/2” double lipped seal with spring seal retainer. Seals around the GN axle.
            
  • Grand National Hub Outer Seal
    Grand National Hub Outer Seal
    x
                

    Replacement outer seal for your GN hubs.

  • Winters Performance 7201 Replacement Grand National Hub Seal
    Winters Performance 7201 Replacement Grand National Hub Seal
    x
                Replacement hub seal for Winters GN hubs.
            
  • Winters Grand National Rear Ends
    Winters Grand National Rear Ends
    x
                Winters full floating Ford 9 inch Grand National rearend features lite weight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31 spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals. 

    Now available in either a 5 x 5" or 5 x 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset.

     

  • Grand National Snout Hub Inner Seal, 1.375 x 1.831 Inch
    Grand National Snout Hub Inner Seal, 1.375 x 1.831 Inch
    x
                Replacement snout seal for GN rearends.
            
  • Grand National Rear Hub Bolts, Pair
    Grand National Rear Hub Bolts, Pair
    x
                

    Pair of Grand National rear end drive flange screws.

    • flathead Allen screws
    • 5/16"-18 x 3/4"
    • 1/2" thread length
    • black oxide coated steel
  • AFCO 60323 Grand National 9 Inch Ford Axle Seal, Red, 3x3/16 Inch Tube
    AFCO 60323 Grand National 9 Inch Ford Axle Seal, Red, 3x3/16 Inch Tube
    x
                

    These precision CNC machined housings feature three o-rings on the outer side, and press securely into the axle tube of any GN housing. The unique design works with 28 or 31 spline GN axles to prevent rear end lube from filling the axle tube and depriving the ring and pinion of lubrication.

    Note: For Grand National rearends only.

  • Winters Grand National Rear End w/ GM Metric Brackets
    Winters Grand National Rear End w/ GM Metric Brackets
    x
                

    Winters full floating Ford 9 inch Grand National rear end for Metric chassis features lightweight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31-spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals.

    Now available in either a 5 on 5" or 5 on 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset
  • Grand National Snout Seal Wide 5 Axle
    Grand National Snout Seal Wide 5 Axle
    x
                GN snout seal is for wide 5 axles.
            
  • AFCO 60323-1 Grand National 9 Inch Ford Axle Seal-Blue-3x7/32 In. Tube
    AFCO 60323-1 Grand National 9 Inch Ford Axle Seal-Blue-3x7/32 In. Tube
    x
                

    These precision CNC machined housings feature three o-rings on the outer side, and press securely into the axle tube of any GN housing. The unique design works with 28 or 31 spline GN axles to prevent rear end lube from filling the axle tube and depriving the ring and pinion of lubrication.

    Note: For Grand National rearends only.

  • Grand National Rear End
    $649.99
    Product Rating: 4.00 Stars
    Grand National Rear End
    x
                To help keep the cost of this full floating Ford 9 inch rear end down, This Grand National rear end assembly uses reclaimed original housings with new 3" tubes and ends. They have been cleaned and jig-welded to ensure straightness. Everything else is brand new and includes 31 spline axles, hubs, drive plates, 5/8" studs, bearings, seals, rotors and lug nuts.

    Choose 58" or 60" width, centered pinion. Choose 5 on 5" or 5 on 4-3/4" bolt circles. 
  • DRP Performance 10518 Grand National Rear Hub Bearing Spacer
    New
    DRP Performance 10518 Grand National Rear Hub Bearing Spacer
    x
                Please view the product's page for more information
            
  • Winters Performance 2255C-9120 Grand National Hub Kit, 5 on 5 Inch
    Winters Performance 2255C-9120 Grand National Hub Kit, 5 on 5 Inch
    x
                

    This complete Grand National hub kit from Winters has a 5 on 5" bolt pattern and is made from cast 4140 heat treated steel to ensure that it holds up on your car. This hub kit fits 2-1/2" Grand National spindles and includes all needed hardware.

    • Investment cast 4140 heat treated steel
    • 24 spline steel drive flange
    • Includes bearings, races (installed), hub seal, o-rings, cap and screws, lug nuts and studs
    • 5 on 5" bolt pattern
    • Fits 2-1/2” Grand National axle tube end
    • Hub retaining nut not included
    • MFG. Part #2255C-9120
    • Brake Rotor Bolt Pattern: 8 x 7"
    • Wheel Stud Thread Pitch: 5/8"-11
    • Hardware Included
  • Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    x
                
    • Profesionally assembled for oval track racing only 
    • Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • 31-spline premium mini spool
    • New chromoly cross pin
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Includes 3-5/8"stock Ford yoke.

    910-48341 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) or lightening of the ring gear to remove weight (add 91600013; ratios 4.78, 5.25, 5.37, 5.50, 5.57, 6.14, 6.66, 6.83, 7.00, 7.16, and 7.33 are already lightened). The letter "l" behind a ratio also indicates the availability of a lightened ratio.

  • All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    x
                

    Our completely NEW 9" Ford third members start with an aftermarket heavy-duty cast iron carrier featuring a new cast iron Daytona pinion support and larger bearings. Then we use your choice of a standard (8.9 lbs.), lite (6 lbs.) or megalite (5.55 lbs.) steel full spool.

    Each is available with your choice of 3.50:1 to 7.33:1 gear ratio ring & pinion. Also includes NEW bearings and Viton high-temperature seals. Professionally assembled for oval track race use and shipped in a re-useable plastic storage case.

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013).

  • Ford 9 Inch Third Member Assembly, Full Spool, 28-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 28-Spline
    x
                
    • Professionally assembled for oval track racing only 
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48342 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    x
                
    • Professionally assembled for oval track racing only
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48343 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • 9 Inch Ford Rear End Overhaul Kit
    9 Inch Ford Rear End Overhaul Kit
    x
                This 9" Ford overhaul kit includes: pinion pilot, pinion shaft, pinion nut, pinion seal, gasket, shims, crush collar, sealant, gear marking grease, brush and Loctite. Ring gear bolts not included. 

    NOTE: All Ford 9" full spools use overhaul kit 9190950-31, even if they are a 28-spline spool. The 9190950-31 contains the large I.D. standard O.D. carrier bearings and pinion bearings needed for use with our full spools.

    If you are using the H.D. nodular iron center section which uses the large diameter carrier bearings, order kit 9190950-31s, which also includes the large pinion bearings for use with the Daytona pinion support.

    9" Ford Carrier Bearing Chart (GIF)  - Double check your bearing p/n.

  • Speedway Grand National Drive Flange Dust Cover
    Speedway Grand National Drive Flange Dust Cover
    x
                
    • Fits Speedway or Winters GN drive flanges
    • O-ring and bolts not included
  • Winters Ball Bearing Wide 5 Hub
    From: $339.99
    Winters Ball Bearing Wide 5 Hub
    x
                

    If you want the ultimate in wide 5 hubs, these are it!

    These lightweight magnesium hubs reduce rolling resistance by using ball type bearings and oil instead of grease. They are stronger than ever and include drilled studs, seals, bearings, seals and drive flange.  Lug nuts are not included.

    Brake rotor bolt pattern is the standard 8 bolt on 7".

  • Winters Performance 2841 Inner Axle Seal for 2.605 ID Tube
    Winters Performance 2841 Inner Axle Seal for 2.605 ID Tube
    x
                

    Winters inner axle seals feature an aluminum case with O-rings to seal in the side tube I.D. Uses a flexible lip with garter spring to grip the axle shaft. A must for use with non aluminum spool rear ends.

    • Housing Tube I.D:  2.605"
    • Wall Tube:  0.200"
    • Inner Axle Seal I.D:  1-1/8"
  • Winters Performance 3485 Inner Axle Seal for 2.693 ID Tube
    Winters Performance 3485 Inner Axle Seal for 2.693 ID Tube
    x
                

    Winters inner axle seals feature an aluminum case with O-rings to seal in the side tube I.D. Uses a flexible lip with garter spring to grip the axle shaft. A must for use with non aluminum spool rear ends.

    • Housing Tube I.D:  2.693"
    • Wall Tube:  0.156"
Goto Previous PagePrevious Page
1 2 3