Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"grand national rear hub" Page 1 of 1

  • Speedway Grand National Rear Hub Kits
    $189.99
    $229.99
    Speedway Grand National Rear Hub Kits
    x
                Grand National rear hub kit available with 5 on 4-3/4" or 5 on 5" wheel bolt patterns.
            
  • Grand National Rear Hub Bolts, Pair
    Grand National Rear Hub Bolts, Pair
    x
                

    Pair of Grand National rear end drive flange screws.

    • flathead Allen screws
    • 5/16"-18 x 3/4"
    • 1/2" thread length
    • black oxide coated steel
  • Winters Grand National Rear Ends
    Winters Grand National Rear Ends
    x
                Winters full floating Ford 9 inch Grand National rearend features lite weight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31 spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals. 

    Now available in either a 5 x 5" or 5 x 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset.

     

  • DRP Performance 10518 Grand National Rear Hub Bearing Spacer
    New
    DRP Performance 10518 Grand National Rear Hub Bearing Spacer
    x
                Please view the product's page for more information
            
  • Winters Grand National Rear End w/ GM Metric Brackets
    Winters Grand National Rear End w/ GM Metric Brackets
    x
                

    Winters full floating Ford 9 inch Grand National rear end for Metric chassis features lightweight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31-spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals.

    Now available in either a 5 on 5" or 5 on 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset
  • Lightweight Steel GN Rear Hub
    $129.99
    Lightweight Steel GN Rear Hub
    x
                These lightweight steel Grand National rear hubs will make use of and work in conjunction with a rotor adaptor flange, # 910-48354-GN shown below . 5-1/2 lbs. With 5/8" coarse studs and races. IMCA approved. 5 on 5".
            
  • Speedway Grand National Rear Hub, 5 on 5 Inch
    Speedway Grand National Rear Hub, 5 on 5 Inch
    x
                5 on 5" bolt pattern with studs and races. Direct replacement for Winters and others.
            
  • AFCO 10355 Grand National Rear Hub Bearings
    AFCO 10355 Grand National Rear Hub Bearings
    x
                Kit Fits all GN 5 x 5 hubs except Super Speedway and Howe.  Comes with  RH 10206 locknut
            
  • Speedway Grand National Rear Hub, 5 on 4-3/4 Inch
    Speedway Grand National Rear Hub, 5 on 4-3/4 Inch
    x
                5 on 4-3/4" bolt pattern with studs and races. Direct replacement for Winters and others.
            
  • Grand National Rear End
    $649.99
    Product Rating: 4.00 Stars
    Grand National Rear End
    x
                To help keep the cost of this full floating Ford 9 inch rear end down, This Grand National rear end assembly uses reclaimed original housings with new 3" tubes and ends. They have been cleaned and jig-welded to ensure straightness. Everything else is brand new and includes 31 spline axles, hubs, drive plates, 5/8" studs, bearings, seals, rotors and lug nuts.

    Choose 58" or 60" width, centered pinion. Choose 5 on 5" or 5 on 4-3/4" bolt circles. 
  • Grand National 9 Inch Ford Rear End Hub Replacement Bearing
    Grand National 9 Inch Ford Rear End Hub Replacement Bearing
    x
                Replacement bearing cup (912-TL610510) and cone (912-TL610549) for GN Hub.
            
  • Grand National 9 Inch Ford Rear End Hub Replacement Bearing Race
    Grand National 9 Inch Ford Rear End Hub Replacement Bearing Race
    x
                Replacement bearing cup (912-TL610510) and cone (912-TL610549) for GN Hub.
            
  • Wilwood 270-6513D Starlite Wide Five Racing Hub, Rear
    Wilwood 270-6513D Starlite Wide Five Racing Hub, Rear
    x
                

    Starlite hubs remain as the oval track benchmark standard. Based on the traditional eight-bolt drive flange design, Starlite hubs demonstrate superior strength from perminant mold, high density aircraft aluminum. The close tolerance castings are precision machined to assure consistent fit, strength and durability. Over the years, this innovative hollow core design has been refined and is race proven. Wilwood's high volume, quality assured manufacturing capability has made it both racing tough and economical.

    Starlite hubs are available in standard offset for use with Superlite, Dynalite and Narrow Mount Dynalite series fixed mount calipers. The GM offset is available for use with GM style floating mount calipers. A new offset configuration is also available to accommodate the thickness of dynamic rotor mounting plates. Fine threaded 5/8" studs are also an option on the Starlite series.

    Click Here for Product Line Sheet (pdf)

  • 9 Inch Ford Housing with Metric Brackets, 60-3/4 Inch Hub-to-Hub Width
    9 Inch Ford Housing with Metric Brackets, 60-3/4 Inch Hub-to-Hub Width
    x
                If your class does not allow a grand national rear end this is your best choice. These housings have new centerless ground 3" tubes installed in reclaimed original Ford 9" housings and have the end and metric brackets jig welded in place. We offer this housing with either centered or 2" offset yoke to the right pinion locations. Works great with Currie cut-to-fit axles. Axles sold separately. Use two 30 inch axles. IMCA Approved.
            
  • 9 Inch Ford Housing with Metric Brackets, 58 Inch Hub-to-Hub Width
    9 Inch Ford Housing with Metric Brackets, 58 Inch Hub-to-Hub Width
    x
                If your class does not allow a grand national rear end this is your best choice. These housings have new centerless ground 3" tubes installed in reclaimed original Ford 9" housings and have the end and metric brackets jig welded in place. We offer this housing with either centered or 2" offset to the right pinion locations. Works great with Currie cut-to-fit axles. Axles sold separately. IMCA Approved.
            
  • 9 Inch Ford Housing with Metric Brackets, 58-3/4 Inch Hub-to-Hub Width
    9 Inch Ford Housing with Metric Brackets, 58-3/4 Inch Hub-to-Hub Width
    x
                If your class does not allow a grand national rear end this is your best choice. These housings have new centerless ground 3" tubes installed in reclaimed original Ford 9" housings and have the end and metric brackets jig welded in place. We offer this housing with either centered or 2" offset yoke to the right pinion locations. Works great with Currie cut-to-fit axles. Axles sold separately. Use two 29 inch axles. IMCA Approved.
            
  • 9 Inch Ford Housing with Metric Brackets, 60 Inch Hub-to-Hub Width
    9 Inch Ford Housing with Metric Brackets, 60 Inch Hub-to-Hub Width
    x
                If your class does not allow a grand national rear end this is your best choice. These housings have new centerless ground 3" tubes installed in reclaimed original Ford 9" housings and have the end and metric brackets jig welded in place. We offer this housing with either centered or 2" offset to the right pinion locations. Works great with Currie cut-to-fit axles. Axles sold separately. IMCA Approved.
            
  • Winters Ball Bearing Wide 5 Hub
    From: $339.99
    Winters Ball Bearing Wide 5 Hub
    x
                

    If you want the ultimate in wide 5 hubs, these are it!

    These lightweight magnesium hubs reduce rolling resistance by using ball type bearings and oil instead of grease. They are stronger than ever and include drilled studs, seals, bearings, seals and drive flange.  Lug nuts are not included.

    Brake rotor bolt pattern is the standard 8 bolt on 7".

  • GN Brake Adpt Plate 8-7"BC
    $34.99
    GN Brake Adpt Plate 8-7"BC
    x
                Fits 8 bolt on 7" center rotors.  For use on GN rear hub, 910-48351-DIR, to permit attachment of brake rotors.
            
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Winters Modified Quick Change Rear End
    From: $1,399.99
    Winters Modified Quick Change Rear End
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • Wilwood 270-6733 Starlite Wide Five Rear Drive Flange
    Wilwood 270-6733 Starlite Wide Five Rear Drive Flange
    x
                Wilwood rear drive flange for Starlite hubs.

    Click Here for Product Line Sheet (pdf)

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31936 Instructions (PDF)

  • AFCO 60324-2 O-Ring for 10660323-2
    $1.99
    $2.99
    AFCO 60324-2 O-Ring for 10660323-2
    x
                

    These precision CNC machined housings feature three o-rings on the outer side, and press securely into the axle tube of any GN housing.  The unique design works with 28 or 31 spline GN axles to prevent rear end lube from filling the axle tube and depriving the ring and pinion of lubrication.

  • Garage Sale - AFCO Grand National 9 Inch Ford Rear End Hub Replacement Bearing Race
    Garage Sale
    Garage Sale - AFCO Grand National 9 Inch Ford Rear End Hub Replacement Bearing Race
    x
                

    These bearing races are garage sale priced because they have some surface rust.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    Replacement bearing cup (L610510) for GN Hub.

  • Garage Sale - Grand National Rear Hub Race
    Garage Sale
    Garage Sale - Grand National Rear Hub Race
    x
                

    AFCO steel rear hub race for Grand National rear.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Speedway Grand National Rear Hub, 5 On 5 Inch
    Garage Sale
    Garage Sale - Speedway Grand National Rear Hub, 5 On 5 Inch
    x
                

    5 on 5" bolt pattern with studs and races. Direct replacement for Winters and others.

     

    This hub is garage sale priced because it has been installed and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Grand National IMCA Rear Hub Race
    Garage Sale
    Garage Sale - Grand National IMCA Rear Hub Race
    x
                

    AFCO replacement bearing cup (912-TL610510) and cone (912-TL610549) for GN Hub.

     

    Clearance! 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Grand National Front Hub Outer Race
    Garage Sale
    Garage Sale - Grand National Front Hub Outer Race
    x
                

    Outter hub race for Grand National rear.

     

    Clearance! 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS