Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"grand national" Page 1 of 7

  • Winters Grand National Rear Ends
    Winters Grand National Rear Ends
    x
                Winters full floating Ford 9 inch Grand National rearend features lite weight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31 spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals. 

    Now available in either a 5 x 5" or 5 x 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset.

     

  • Grand National Snout Hub Inner Seal, 1.375 x 1.875 Inch
    Grand National Snout Hub Inner Seal, 1.375 x 1.875 Inch
    x
                Replacement seal for your GN hubs and axle housing snouts.
            
  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Grand National Rear Hub Bolts, Pair
    Grand National Rear Hub Bolts, Pair
    x
                

    Pair of Grand National rear end drive flange screws.

    • flathead Allen screws
    • 5/16"-18 x 3/4"
    • 1/2" thread length
    • black oxide coated steel
  • Speedway Grand National Rear Hub Kits
    $189.99
    $229.99
    Speedway Grand National Rear Hub Kits
    x
                Grand National rear hub kit available with 5 on 4-3/4" or 5 on 5" wheel bolt patterns.
            
  • Grand National Axle Nut Wrench
    Grand National Axle Nut Wrench
    x
                Rear axle socket for our Ford 9"-based Grand National rear ends. Fits 1/2" drive ratchet. Aluminum construction.
            
  • Winters Grand National Rear End w/ GM Metric Brackets
    Winters Grand National Rear End w/ GM Metric Brackets
    x
                

    Winters full floating Ford 9 inch Grand National rear end for Metric chassis features lightweight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31-spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals.

    Now available in either a 5 on 5" or 5 on 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset
  • Speedway Stamped Center Grand National Housing, IMCA Approved
    Speedway Stamped Center Grand National Housing, IMCA Approved
    x
                

    These stamped center Grand National rear end housings are brand new and feature Grand National snouts with a centered pinion.  They come in your choice of 58", 60", or 62" widths and are IMCA approved for racing.

    • Brand new stamped steel center housing
    • 3" O.D., .188" wall DOM tubes
    • Grand National snouts
    • Available in 58, 60, 62" widths
    • Centered pinion
    • IMCA approved
  • Grand National Rear End
    $649.99
    Product Rating: 4.00 Stars
    Grand National Rear End
    x
                To help keep the cost of this full floating Ford 9 inch rear end down, This Grand National rear end assembly uses reclaimed original housings with new 3" tubes and ends. They have been cleaned and jig-welded to ensure straightness. Everything else is brand new and includes 31 spline axles, hubs, drive plates, 5/8" studs, bearings, seals, rotors and lug nuts.

    Choose 58" or 60" width, centered pinion. Choose 5 on 5" or 5 on 4-3/4" bolt circles. 
  • Winters Performance 7271 Grand National Snout Seal
    Winters Performance 7271 Grand National Snout Seal
    x
                2-1/2” double lipped seal with spring seal retainer. Seals around the GN axle.
            
  • Winters Performance 1726 Grand National Hub Dust Cap
    Winters Performance 1726 Grand National Hub Dust Cap
    x
                
            
  • Grand National 9 Inch Ford Rear End Hub Replacement Bearing
    Grand National 9 Inch Ford Rear End Hub Replacement Bearing
    x
                Replacement bearing cup (912-TL610510) and cone (912-TL610549) for GN Hub.
            
  • Winters Performance 7201 Replacement Grand National Hub Seal
    Winters Performance 7201 Replacement Grand National Hub Seal
    x
                Replacement hub seal for Winters GN hubs.
            
  • Show Car Dreams Special Edition Book, Grand National Roadster Show
    Show Car Dreams Special Edition Book, Grand National Roadster Show
    x
                

    SHOW CAR DREAMS - The Art and Color of Sixty Years of Indoor Custom Car and Hot Rod Shows

    From the personal collection of Bob Larivee Sr. come hundreds of never before seen photos spanning the decades from the beginning of AutoRama, World of Wheels and the entire family of indoor car shows created and promoted by the Larivee family.  This is truly a spectacular collection of history and vehicles that helped shape the entire street rod genre.  It continues to do the same to this day.

    • Special Edition - 310+ pages - Documenting the exciting era of show car history with a special chapter dedicated to and focusing on a particular regions shows
    • Covers the Grand National Roadster Show

    Each Edition is packaged in it's own custom made velvet-lined wooden gift box.  Truly a treasure to be cherished by any show car lover.

    EXTREMELY LIMITED SUPPLY!

  • Winters Performance 2255C-9120 Grand National Hub Kit, 5 on 5 Inch
    Winters Performance 2255C-9120 Grand National Hub Kit, 5 on 5 Inch
    x
                

    This complete Grand National hub kit from Winters has a 5 on 5" bolt pattern and is made from cast 4140 heat treated steel to ensure that it holds up on your car. This hub kit fits 2-1/2" Grand National spindles and includes all needed hardware.

    • Investment cast 4140 heat treated steel
    • 24 spline steel drive flange
    • Includes bearings, races (installed), hub seal, o-rings, cap and screws, lug nuts and studs
    • 5 on 5" bolt pattern
    • Fits 2-1/2” Grand National axle tube end
    • Hub retaining nut not included
    • MFG. Part #2255C-9120
    • Brake Rotor Bolt Pattern: 8 x 7"
    • Wheel Stud Thread Pitch: 5/8"-11
    • Hardware Included
  • DRP Performance 10518 Grand National Rear Hub Bearing Spacer
    New
    DRP Performance 10518 Grand National Rear Hub Bearing Spacer
    x
                Please view the product's page for more information
            
  • Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    x
                
    • Profesionally assembled for oval track racing only 
    • Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • 31-spline premium mini spool
    • New chromoly cross pin
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Includes 3-5/8"stock Ford yoke.

    910-48341 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) or lightening of the ring gear to remove weight (add 91600013; ratios 4.78, 5.25, 5.37, 5.50, 5.57, 6.14, 6.66, 6.83, 7.00, 7.16, and 7.33 are already lightened). The letter "l" behind a ratio also indicates the availability of a lightened ratio.

  • All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    x
                

    Our completely NEW 9" Ford third members start with an aftermarket heavy-duty cast iron carrier featuring a new cast iron Daytona pinion support and larger bearings. Then we use your choice of a standard (8.9 lbs.), lite (6 lbs.) or megalite (5.55 lbs.) steel full spool.

    Each is available with your choice of 3.50:1 to 7.33:1 gear ratio ring & pinion. Also includes NEW bearings and Viton high-temperature seals. Professionally assembled for oval track race use and shipped in a re-useable plastic storage case.

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013).

  • Ford 9 Inch Third Member Assembly, Full Spool, 28-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 28-Spline
    x
                
    • Professionally assembled for oval track racing only 
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48342 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    x
                
    • Professionally assembled for oval track racing only
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48343 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • Safety Racing Grand National Window Nets, Button Release
    Safety Racing Grand National Window Nets, Button Release
    x
                Nylon and polyester sewn with heavy nylon thread. Comes with quick release mounting system with GM seat belt buckle release. Not SFI certified.  

    Measures 16" x 24" at base. Available in red, blue, orange, purple, yellow, white and black.

  • Speedway Grand National Window Nets, Latch and Link Release
    Speedway Grand National Window Nets, Latch and Link Release
    x
                Nylon and polyester sewn with heavy nylon thread. Comes with quick release mounting system with racing harness style latch & link release. Not SFI certified.  

    Measures 16" x 24" at base. Available in red, blue, orange, purple, yellow, white and black.

  • Grand National Snout Hub Inner Seal, 1.375 x 1.831 Inch
    Grand National Snout Hub Inner Seal, 1.375 x 1.831 Inch
    x
                Replacement snout seal for GN rearends.
            
  • Mittler Grand National Aluminum Drive Flange, 5-on-5 Inch
    Mittler Grand National Aluminum Drive Flange, 5-on-5 Inch
    x
                

    The diameter of the GN HAT flange is smaller than the diameter of the DIRECT flange, therefore the HAT flange will work either rotor mount application, but the DIRECT flange will only work with direct mount rotor setups.

    "DIR" Refers to a hub assembly that uses a rotor adaptor that bolts the rotor directly to the back of the hub. "HAT" refers to a hub assembly that uses a rotor and hat assembly that slides over the outside of the hub to mount to the rotor.

    Be sure to give the two countersunk retainer screws a liberal dab of grease or anti-seize compound.

  • Mittler Grand National Rear Axle Housing, 60 Inch
    Mittler Grand National Rear Axle Housing, 60 Inch
    x
                

    Winters Grand National replacement full floating Ford 9 inch rear end housing.

    Part # 655-4800 features two 30" tubes and the pinion is centered.
    Part # 655-4803 features  has a driver side tube at 31-1/2" in length and pass. side is 30-1/2" in length.  Pinion is offset 1/2" to RH side.

  • AFCO 60323-1 Grand National 9 Inch Ford Axle Seal-Blue-3x7/32 In. Tube
    AFCO 60323-1 Grand National 9 Inch Ford Axle Seal-Blue-3x7/32 In. Tube
    x
                

    These precision CNC machined housings feature three o-rings on the outer side, and press securely into the axle tube of any GN housing. The unique design works with 28 or 31 spline GN axles to prevent rear end lube from filling the axle tube and depriving the ring and pinion of lubrication.

    Note: For Grand National rearends only.

  • Mittler Grand National Rear Axle Housing, 62 Inch
    Mittler Grand National Rear Axle Housing, 62 Inch
    x
                

    Winters Grand National replacement full floating Ford 9 inch rear end housing. 

    Part # 655-4800 features two 30" tubes and the pinion is centered.
    Part # 655-4803 features  has a driver side tube at 31-1/2" in length and pass. side is 30-1/2" in length.  Pinion is offset 1/2" to RH side.

  • Winters Grand National Replacement Rear Axle Housing, 58 Inch
    Winters Grand National Replacement Rear Axle Housing, 58 Inch
    x
                Winters GN replacement 9" rearend housing. This full floating ford 9 inch rear end is a 58" replacement Grand National rear end housing.
            
Goto Previous PagePrevious Page
1 2 3 4 5 6 7