Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"gm metric brake caliper" Page 1 of 5

  • 1978-Up GM Metric Brake Calipers, IMCA Approved
    1978-Up GM Metric Brake Calipers, IMCA Approved
    x
                

    These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

     

    • IMCA approved
    • No core charge required
    • 7/16"-20 inlet
    • Can be used with brake hoses from Pre-1978 GM intermediate cars
    • Brake pads & bolts sold separately

     

    Note: Does NOT include brake pads or slider bolts and bushings.

  • GM Metric Disc Brake to 9 Inch Ford Bracket Set
    GM Metric Disc Brake to 9 Inch Ford Bracket Set
    x
                Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend.  Hardware sold separately.

    Includes:
    • 2 Caliper brackets
    • 2 Adapter plates
    • 2 Spacer plates
    • 8 5/16" spacers
    • 8 1/8" spacers

    Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Speedway 1978-88 GM Metric Brake Pad Spacer
    Speedway 1978-88 GM Metric Brake Pad Spacer
    x
                Use Speedway brake pad spacers with .810" rotors and stock-style 1978-1988 GM calipers. Spaces brake pad out .242" from caliper piston.
            
  • 11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    x
                This rotor allows the use of GM Metric calipers along with a GM car bolt pattern. Vented stock 11" diameter brake rotors for 1974-1980  Mustang  II, Pinto, or Bobcat spindles (or popular GM Metric calipers and brackets). Brake rotors are new, not plugged or re-drilled. Has a   5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread   wheel studs.
    • 5 on 4.75" Bolt circle
    • Granada type rotor
    • For use with popular GM Metric calipers and brackets
    • Bearing and seal kit sold separately (910-31052)
  • Wilwood 120-6427 GM Metric Brake Caliper, 2.38 Piston, 1.25 Rotor
    Wilwood 120-6427 GM Metric Brake Caliper, 2.38 Piston, 1.25 Rotor
    x
                

    Wilwood's GM Metric Caliper is a direct replacement for the 1978 and later D154 type GM metric caliper. Weighs starting at 2.92 pounds, it provides a substantial weight savings over cast iron OE calipers. This competition caliper represents that latest refinements in a caliper design and manufacturing through the use of comuputer based FEA solid modeling and stress simulation programs. The real strength of this caliper comes from its triple bridge configuration, and its lightness is a result of efficient design.

    • Casting using a tight grained, high density aircraft alloy
    • All load bering and stress points are fortified to maximize strength
    • All unnecessary material is removed to maximize weight reduction
    • Stainless pistons provide improved fluid protection with high resistance to corrosion and low heat transfer
    • Each is fully machined, assembled with a high temperature seals, and tested-in house at Wilwood
    • Completely interchangeable w/ stock GM caliper (racing only)
    • 11" to 13" diameter, 1.25" thick rotors
    • 3.7 lbs.

    GM Racing Brake Caliper Dimensions (PDF)

  • Emergency Brake Calipers
    $99.99
    Product Rating: 5.00 Stars
    Emergency Brake Calipers
    x
                These 1978-up GM Metric calipers accept either GM or Lokar type emergency brake cables. The fluid inlets are tapped to accept 7/16-20 banjo fittings. Includes the bracket to attach the emergency brake cable, slider bolts, and brake pads. 

    The bleeder hole is 10mm x 1.5. If speed bleeders are needed, use our part number 6173958. Mount bolt spacing is 5.45".

    910-31046 Instructions (PDF)

  • Big Bore GM Metric 1978-88 Brake Caliper
    Big Bore GM Metric 1978-88 Brake Caliper
    x
                

    If you are using 1978-88 GM Metric style brake calipers your choices of piston sizes are pretty much limited to 2-1/2". This isn't bad unless you want to 'tune' your braking by using different size calipers front to rear. By using a larger 2-3/4" piston you will increase the braking force at a wheel over a wheel using a smaller piston.

    Bleeder and inlet are both 10mm-1.5 inlet allowing the caliper to be used on either side. Plus, these calipers have been ground smooth to make them easier to paint.

    Includes pads and hardware. Sold as EACH.

    • 20% increase in stopping power over stock calipers
    • Can used on the left and right sides
    • Extra ribs have been added internally while unnecessary weight was removed
    • Lighter, stronger, has more stopping power than OEM calipers
    • Each caliper includes:
      • brake pads
      • clips
      • slide pins
      • banjo bolt
      • washers
      • bleeder screw
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    x
                

    An economical, lightweight front disc brake conversion kit for 1949-54 Chevy car spindles. This kit uses 9-1/4" Mustang rotors with the easy-to-find '78-'88 GM metric calipers. This basic kit includes caliper brackets and hardware.

    Note: Your spindles must be machined to accept this kit, or you can use Speedway modified reproduction forged spindles 916-32100. This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube or I-beam front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31950 Instructions (PDF)

  • Wilwood 120-9333 GM Iron Metric Caliper, 2 Inch Piston
    Wilwood 120-9333 GM Iron Metric Caliper, 2 Inch Piston
    x
                

    These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories and low cost disc brake conversions. Not IMCA pproved.

    Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability and performance. 

    To address these needs, Wilwood has tooled up two separate castings that are fitted with either 2.75" or 2" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when u

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Wilwood 120-8924 GM Iron Metric Caliper, 2-3/4 Inch Piston
    Wilwood 120-8924 GM Iron Metric Caliper, 2-3/4 Inch Piston
    x
                

    These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories and low cost disc brake conversions. Not IMCA pproved.

    Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability and performance. 

    To address these needs, Wilwood has tooled up two separate castings that are fitted with either 2.75" or 2" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when u

  • 1978-88 Replacement GM Midsize Metric Calipers
    1978-88 Replacement GM Midsize Metric Calipers
    x
                

    These stock replacement single piston metric calipers were standard equipment on 1978-88 GM midsize cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to midsize 1969-1977 caliper.

    • No core charge required
    • 10mm x 1.50 inlet 
    • Speedway 156 pads and slider bolts included

     

  • Hawk HB119M.594 Performance Black 1978-Up GM Metric Brake Pads
    Hawk HB119M.594 Performance Black 1978-Up GM Metric Brake Pads
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Hawk Black Pads:

    Medium torque and temperature compound designed to be a good, all-purpose low- cost racing brake pad. Can be used as a Dirt Circle Track and Stock Car application.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 15E-6103K Poly-E GM Metric 1978-Up Brake Pads
    Wilwood 15E-6103K Poly-E GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Wilwood 150-9422K BP-20 GM Metric 1978-Up Brake Pads
    Wilwood 150-9422K BP-20 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • AFCO 40122PR Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PR Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • Jet Mod Brake Kit
    $699.99
    Jet Mod Brake Kit
    x
                This kit is patterned after the setup that Johnny "The Jet" Saathoff used to drive to FOUR IMCA National Championships. Comes with everything that you'll need to set up your IMCA racers braking system.

    Kit includes:
    • 7/16"-20" RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolts
    • GM Metric Clamp-on Caliper Bolts
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Bolts
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fitting
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
    • RH & LH Front Caliper Bracket
  • Speedway IMCA Mod Brake Kit
    $489.99
    Speedway IMCA Mod Brake Kit
    x
                Our affordable Speedway brake system comes with everything you'll need for your IMCA racer.

    Kit includes:
    • GM Metric Clamp-on Calipers
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolt
    • 7/16" to AN4 Banjo Fitting
    • 7/16"-20" Banjo Bolt
    • 18" Brake Line w/ Straight
    • 26" Brake Line w/ 90° End
    • 3/8"-24 Female to AN4 Fitting
    • Lightweight Brake Line Kit
  • Speedway Soft Street Brake Pads, GM Metric 1978-UP
    Speedway Soft Street Brake Pads, GM Metric 1978-UP
    x
                

    Speedway soft brake pad for GM Metric 1978-Up.

    Sold as one set of 4 (ST); outfits two calipers.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Speedway 156 1978-Up GM Metric Brake Pads
    Speedway 156 1978-Up GM Metric Brake Pads
    x
                

    The Speedway 156 brake pad works with aluminum or steel rotors. Best pad for aluminum rotors. Features a low metallic compound for long life and excellent street performance.

    Sold as one pair (PR); outfits one caliper.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • AFCO 7241-9005 Undersized 2-1/4 Inch GM Metric Caliper, RH Side
    AFCO 7241-9005 Undersized 2-1/4 Inch GM Metric Caliper, RH Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Undersized: 6.620 lbs.
    • 10mm - 1.5 inlet

    Undersized Metric Calipers:

    Can be used on the right front of open wheel modifieds and street stocks on dirt surfaces to reduce right front braking bias to aid in corner entry. Can be used on the rear of open wheel modifieds and street stocks racing on pavement to reduce rear brake bias.

     

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • AFCO 7241-9002 Oversized 2-3/4 Inch GM Metric Caliper, Left Hand Side
    AFCO 7241-9002 Oversized 2-3/4 Inch GM Metric Caliper, Left Hand Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Oversize: 6.4 lbs.
    • 10mm - 1.5 inlet

    Oversized Metric Calipers:

    Can be used in the rear of open wheel modifieds and street stocks racing on dirt surfaces to increase rear brake bias. Can be used on the front of open wheel modifieds and street stocks racing on pavement surfaces.

     

  • AFCO 7241-9001 Oversized 2-3/4 Inch GM Metric Caliper, Right Hand Side
    AFCO 7241-9001 Oversized 2-3/4 Inch GM Metric Caliper, Right Hand Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Oversize: 6.4 lbs.
    • 10mm - 1.5 inlet

    Oversized Metric Calipers:

    Can be used in the rear of open wheel modifieds and street stocks racing on dirt surfaces to increase rear brake bias. Can be used on the front of open wheel modifieds and street stocks racing on pavement surfaces.

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5