Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"gm chevy spindle" Page 1 of 3

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    x
                

    An economical, lightweight front disc brake conversion kit for 1949-54 Chevy car spindles. This kit uses 9-1/4" Mustang rotors with the easy-to-find '78-'88 GM metric calipers. This basic kit includes caliper brackets and hardware.

    Note: Your spindles must be machined to accept this kit, or you can use Speedway modified reproduction forged spindles 916-32100. This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube or I-beam front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31950 Instructions (PDF)

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31953 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31954 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Includes many features not found on GM's original design
    • Forged steel (not cast) reproduction spindles
    • Kit includes pair of new spindles with new kingpins fit to spindle
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    x
                GM bolt pattern 5 on 4-3/4"

    Easily installs 11" rotors and 1969-77 mid-size GM single piston calipers to your 1937-48 Ford passenger car spindles. No machine work needed.

    Kit Includes:
  • New 11" brake rotor, 5 x 4-3/4"
  • Semi-metallic brake pads
  • GM Caliper slide bolts
  • Rebuilt 1969-77 calipers (7/16"-20 inlets)
  • 1973-77 GM brake brackets
  • 1973-77 hardware
  • New bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Rubber Brake Lines
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Seals
  • Bolt kit for flat steering arm
  • Dust caps
  • Instructions
  • Not for use with bolt-on steering arms.  The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or earlier roadster.

    910-31941 Instructions (pdf)

  • 1964-72 Chevy Brake Kit for Drop Spindles
    1964-72 Chevy Brake Kit for Drop Spindles
    x
                

    Fits our 910-34906 and 910-34908 2" dropped spindles. (Will not fit stock spindles.) For 1964-1972 Chevelle/Malibu/GTO/Lemans/442/Cutlass/Skylark GM A-bodies, and 1967-1969 Camaro/Firebird GM F-bodies.

    The brake kit uses the common single piston '78-'88 GM Metric calipers and 10-1/2" vented rotors with a 5 on 4-3/4" bolt pattern. Calipers have 7/16"-20 inlets. Includes rubber brake lines and zinc plated dust caps.

  • Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles.

    Kit features:

    • 9-1/4" brake rotor, 5 x 4-3/4" wheel bolt pattern
    • Remanufactured Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, hardware and instructions included

    Note:

    • Will not work with traditional style steering (no room for upper steering arm).
    • Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.
    • For use only on street rod tube or I-beam front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends.

    910-31948 Instructions (PDF)

  • Basic Disc Brake Kit, GM Mid-size to Early Chevy Spindle
    Basic Disc Brake Kit, GM Mid-size to Early Chevy Spindle
    x
                

    Install 11" diameter GM mid-size disc brakes on your 1949-54 Chevy car spindles or 1941-59 Chevy pickup spindles with this basic bracket kit.

    Kit includes:

    • Brake brackets
    • Bearing & seal adapters
    • Hardware

    This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31916 Instructions (PDF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • 1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    x
                

    Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.

    The optional disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Brake kit sold separately.

    • 2" drop
    • Completes both sides
    • Maintains factory steering & suspension geometry
    • Includes midsize caliper bracket & bolts

    Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.

    910-34923 Instructions (PDF)

  • 1947-54 Chevy/GMC Pickup Dropped Axle
    1947-54 Chevy/GMC Pickup Dropped Axle
    x
                

    Our 3" dropped axle for your classic '47-'54 Chevy half-ton pick-up will get the front end down where you want it. The center portion of the axle is made of 2" DOM tubing while the ends are CNC milled for solid steel. These axles give you 3" of drop.

    The Chevy axles require the steering arm to be modified to accept rod ends or tie rods. U-bolts sold separately.

    • King pin to king pin centers = 50.5"
    • 6" drop measured from spring pad to spindle boss center
    • Axle accepts a 1-3/4" wide spring
    • Spring pad center-to-center = 26.75"
    • Center to center of u-bolt holes is 2.30" side to side
    • Center to center of u-bolt holes front to rear is 3.195"
    • Spring pad width is 29.072" center to center of the outer U-bolt holes
    • Axle Kingpin Boss Height:  2-7/16" (2.438")
    • Axle will provide a camber reading of -1.5 degrees
  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    x
                

    Easily installs 11" Ford/Mopar rotors and 1969-1977 midsize GM single piston calipers to your 1937-1948 Ford passenger car spindles. No machine work needed. Great for street rods based on 1932-1948 Fords, however, these kits are much too large and heavy for a T-bucket or an early roadster.

    Not for use with bolt-on steering arms.

    Note: Some applications may require you to purchase item (617-8562) with this kit.

    910-31940 Instructions (PDF)

  • Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Deluxe kingpins feature modern needle bearing inserts that replace the standard brass bushings
    • Deluxe kingpins are ideal for use on heavier street rods that require superior strength, better lubrication and easier steering
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Speedway 1949-54 Chevy Car Modified Spindles Only
    Speedway 1949-54 Chevy Car Modified Spindles Only
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    Spindles also available in kit form with kingpins. Save when you purchase a complete kit!

    Spindle Identification Guide (GIF)

  • Reamed 1979-Up GM Intermediate Midsize Spindles
    Reamed 1979-Up GM Intermediate Midsize Spindles
    x
                

    These reclaimed OEM spindles are from 1979-up GM Metric midsize cars. The spindles have been thoroughly cleaned, inspected, and reamed for use with big ball joints (Chevy truck-style ball joints).

    • Upper Ball Joint use 917-20031 or 910-34323 (Moog# K6024 or K772) 
    • Lower Ball Joint use 917-20038 or 917-20038-1 (Moog# K6141 or K6117)

    Uses '78-'88 Metric style calipers and the larger M12649 outer bearing. Spindle will accept 5x5 rotor 910-31061 if used with bearing/seal kit 910-31048. Caliper mounting is 5.46" or approximately 5-7/16".

  • 1958-1964 Chevy Disc Brake Kit for Drop Spindles
    1958-1964 Chevy Disc Brake Kit for Drop Spindles
    x
                

    Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets.

    Kit includes:

    • Street brake pads
    • 12" brake rotors
    • GM '69-'77 mid-size single piston iron calipers
    • Caliper slide bolts
    • Rubber brake Lines
    • Bearings & Seals
    • Spindle nut kit 

    Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when compared to the OEM drum brake track width.

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    x
                

    Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '49-'54 Chevy style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.

    Chevy Spindle Brake Kit Instructions (PDF) 

  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • 1973-77 GM Midsize 11 Inch Brake Rotor, 5 on 5 Inch
    1973-77 GM Midsize 11 Inch Brake Rotor, 5 on 5 Inch
    x
                

    1973-1977 GM mid sized front brake rotor. 5 on 5" with 5/8" coarse studs installed. 11" diameter x 1".  IMCA Approved.

    This rotor is designed for dirt track applications and should NOT be used for asphalt racing.



     

  • Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    x
                

    This kit allows you to put front disc brakes on your 1955-64 fullsize Chevy passenger car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series) OEM spindles (will NOT work with dropped spindles). It will work with 14" wheels intended for disc brakes, as well as most 15" (or larger) wheels. Works with 5 on 4-3/4 inch bolt patterns.

    Use with our 11" rotor 910-65390 and metric caliper 910-31045 (see Notes). This kit will increase track width 3/8" per side or or 3/4" total when installed.

    Kit Includes:

    • Brake brackets
    • Hardware
    916-31931 Instructions (PDF)
  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Labor to Machine 1949-1954 Chevy Spindles
    Labor to Machine 1949-1954 Chevy Spindles
    x
                

    We can machine YOUR 1949-54 Chevy passenger car spindles to receive our disc brake conversions.

    Note:  Measure carefully to insure you have the correct spindle. Many older GM spindles look similar. Then ship them to us with your brake kit order. 

    Spindle Identification Guide (GIF)

     

     

  • GM Midsize Brake Kit for 910-34923 Spindles
    GM Midsize Brake Kit for 910-34923 Spindles
    x
                

    Disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.

    Spindles sold separately.

    910-31995 Instructions (PDF)

  • 1955-57 Chevy Dropped Spindle Kit for GM Metric Calipers
    1955-57 Chevy Dropped Spindle Kit for GM Metric Calipers
    x
                

    Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.

    • 2" drop
    • Completes both sides
    • Maintains factory steering & suspension geometry
    • Includes Metric Caliper bracket & bolts

    Brake kit sold separately. Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.

    Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.

    910-34921 Instructions (PDF)

  • Speedway 1963-71 Truck K6024 Style Upper Ball Joint
    Speedway 1963-71 Truck K6024 Style Upper Ball Joint
    x
                

    This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds - very durable and economical replacement item. Will not fit stock GM upper A-frame.

    This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Same as Moog K6024.

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • 1955-57 Chevy Car Lower Ball Joint, OEM Replacement
    1955-57 Chevy Car Lower Ball Joint, OEM Replacement
    x
                Please view the product's page for more information
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • AFCO 1968-72 Chevelle Stamped Steel Lower Control Arm, Left
    AFCO 1968-72 Chevelle Stamped Steel Lower Control Arm, Left
    x
                

    These are stock, reclaimed 1968-72 Chevelle A-Body stamped steel control arms that have been cleaned and have had the ball joint removed. A-arm still has OEM bushings that will need to be replaced.

    Accepts Moog K5103 style press-in ball joints for stock spindle, or Moog K6145 ball joints for other GM spindles.

  • Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.
    • Bolt-in (4-bolt) style and cross reference with MOOG #K6136.

    Precision Ball Joint Illustration (GIF)

Goto Previous PagePrevious Page
1 2 3