Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"gm 2 inch column drops" Page 1 of 1

  • Ididit 2302170040 GM 2.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2302170040 GM 2.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2304270040 GM Van 4.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2304270040 GM Van 4.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

    • For stock GM van steering columns (2" diameter)
    • 2 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2305270040 GM Van 5.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2305270040 GM Van 5.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

    • For GM Van column
    • 2 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2303270040 GM Van 3.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2303270040 GM Van 3.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns.

    • For stock GM van steering column
    • 2 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2304170040 GM 4.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2304170040 GM 4.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2303170040 GM 3.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2303170040 GM 3.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 2305170040 GM 5.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2305170040 GM 5.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These mounts feature two cut-outs to allow wiring, etc. to clear.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

    • For stock GM van steering columns (2" diameter)
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary. 

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 2305280040 1932 Ford  5 Inch Steering Column Drop Mount, GM Van
    Ididit 2305280040 1932 Ford 5 Inch Steering Column Drop Mount, GM Van
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits GM van steering columns with 2" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For GM van steering columns, 1932 Ford dash
    • 2 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
    Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits GM steering columns with 2-3/8" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For GM column, 1932 Ford dash
    • 2-3/8 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    x
                When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.  

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Ididit 1130180010 Plain Shorty 16 Inch Tilt Steering Column w/ Shifter
    Ididit 1130180010 Plain Shorty 16 Inch Tilt Steering Column w/ Shifter
    x
                

    When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Garage Sale - Ididit Steering Column Drop Mount, GM Column, 2-3/8 Inch Hole
    Garage Sale
    Garage Sale - Ididit Steering Column Drop Mount, GM Column, 2-3/8 Inch Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These mounts feature two cut-outs to allow wiring, etc. to clear.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Garage Sale - Ididit Plain Shorty 16 Inch Tilt Steering Column With Shifter
    Garage Sale
    Garage Sale - Ididit Plain Shorty 16 Inch Tilt Steering Column With Shifter
    x
                

    When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

     

    This steering column is garage sale priced because it was scratched and dented in shipping. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Ididit Shorty Tilt Steeling Column With Shifter, 16 Inch, Plain
    Garage Sale
    Garage Sale - Ididit Shorty Tilt Steeling Column With Shifter, 16 Inch, Plain
    x
                

    When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

     

    This steering column is garage sale priced because it has been test fit and returned.  This one has a little surface rust from being handled. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS