Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"gm 12 bolt rear" Page 1 of 2

  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

  • 1964-72 GM 12-Bolt Rear End Differential Axle Cover
    1964-72 GM 12-Bolt Rear End Differential Axle Cover
    x
                

    Add some visual attitude to your rear axle with these chrome differential covers. They're stamped from heavy-gauge steel to ward off those pesky oil leaks, and chrome plated for long lasting good looks.

    GM 12-Bolt Rearend Differential Cover

    Fits:

    • Most 1964-72 GM corporate axles

     

     

  • 1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1965-69 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM emergency brake style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31924 Instructions (PDF)

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31919 Instructions (PDF)

  • Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    x
                

    Wilwood'sFDL Pro-Series rear disc kits provide a complete solution for popular GM 12-boltrear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking.

    E-brake cables sold separately. Fits GM 12-bolts with 2.81" offset and OE C-Clip axles. Does not support Special End or C-Clip Eliminator modifications.

    835-1407141 Instructions (PDF)

    Axle Flange Identification Chart

     

     

    Click Here for Exploded Installation Specs

     

  • Low Rear Axle Bracket 5 3/4 Inch
    Low Rear Axle Bracket 5 3/4 Inch
    x
                All brackets are for 3" rear axle application.

    Low Rear Axle Bracket
    Mount radius rods lower than rear axle. 3/8" steel. 5-3/4" long. 3/8" holes.
  • Rear Axle Breather
    $9.99
    Product Rating: 4.80 Stars
    Rear Axle Breather
    x
                

    This rear axle breather will stop lube from being flung out of rear axle housing. Allows "breathing" of rear axle assembly. 7/16"-20 thread. Polished!

    Install with thread sealant or Teflon tape. Can be used on various applications with appropriate plumbing components.

  • Rear End Fluid Level Checker
    $29.99
    Rear End Fluid Level Checker
    x
                

    Screws into fill hole. For better installation, drill hole below fill hole. Ideal for big quick change rear cover, 1/8" NPT.

    You will have to drill and tap rear cover 92547004 to use this level checker. 

  • Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    x
                

    This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a steel panhard bar, chrome plated Carrera coil-over shock assemblies, bare steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

    • Kit includes:
      • Steel panhard bar
      • Chrome plated Carrera coil-over shock assemblies
      • Bare steel 32" radius rods
      • All mounting brackets and hardware

    Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

    Spring Rate Guide (GIF) 

    Coil-Over Mounting Guide (GIF) 

    916-49060 Instructions (PDF)

  • Book/Manual - High-Performance Differentials, Axles & Drivelines
    Book/Manual - High-Performance Differentials, Axles & Drivelines
    x
                All too often, when an enthusiast builds a  high-performance engine, swaps a more powerful engine into a car, or  mounts sticky tires, the driveline components simply can't handle the  added torque and fail. In addition, differential, axles, and driveline  parts have a limited life span under the power of a high-performance  engine. Also, the proper gear ratios need to be selected and installed  for maximum performance on the street, strip, or track. The performance  of the driveshaft, differential, axle, and other driveline components  needs to match the performance level of a particular engine, so maximum  efficiency, longevity, and reliability can be realized.

    This book covers everything you need to know about selecting the most desirable gear ratio, rebuilding differentials and other driveline components, and most importantly, matching the correct driveline components to engine power output. Learn how to set up a limited-slip differential, install high-performance axle shafts, swap out differential gears, and select the best available products for the driveline. This book covers the Chevy 12-bolt, Ford 8.8-inch, Dana units, and many other popular high-performance axles and rear ends. In addition, it explains rear differential basics, rear differential housings, rebuilding open rear differentials, limited-slip differentials, and factory differentials. Ring and pinion gears, axle housings, axle shafts, driveshafts, and U-joints are also cove
  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount.  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    Complete kit includes: polished stainless steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    1932-1934 Four Bar Rear Suspension Instructions (PDF)

    Note: Please be advised that the rods in this kit are shown in a plain steel finish in the alternative photos but do come with a stainless finish as shown in primary photo.

  • Rear Shock Mount
    $14.99
    Product Rating: 4.69 Stars
    Rear Shock Mount
    x
                
    • Weld to 3" rear end
    • Adjustable 3" - 5" below axle centerline
    • Has three 1/2" holes for shocks
    • Simply drill hole size to 5/8" when using 5/8" coil-over mounting hardware
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • AFCO 7250-0110 GM 10 & 12 Bolt Axle Brake Kit
    AFCO 7250-0110 GM 10 & 12 Bolt Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disc brakes on your GM 12 Bolt rearend. Includes two bolt-on caliper brackets, two vented rotors, two new GM Metric calipers and hardware. Has both 5 x 4-1/2" and 5 x 4-3/4" bolt pattern.

    Kit includes:

    • 11-1/4" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

    Minor fitting to axle housing may be required. 

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31936 Instructions (PDF)

  • Transverse Rear Leaf Spring Axle Mounting Brackets, Model T/Model A
    Transverse Rear Leaf Spring Axle Mounting Brackets, Model T/Model A
    x
                

    Use these brackets to mount a late model rear axle into a Model T - Model A Ford chassis when using a high-arch, 2-1/4" wide transverse rear leaf spring (like our 910-43102). Brackets locate the leaf spring directly above the axle housing. Includes zinc plated shackles with nylon bushings, weld-on brackets, and instructions.

    916-45108 Instructions (PDF)

  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • Short Rear Axle Brackets
    $13.99
    Product Rating: 5.00 Stars
    Short Rear Axle Brackets
    x
                

    "Short" rear axle bracket designed for use with Speedway rear radius rods. 

    • Fits 3" diameter rear axle tube
    • 3/8" thick steel
    • 3/8" diameter holes
  • 12 Bolt GM Rear End Differential Cover Gasket
    12 Bolt GM Rear End Differential Cover Gasket
    x
                

    Replace your stock rearend cover gasket with these reusable gaskets.  Made of top-quality materials, these differential cover gaskets are designed to ensure a leak-free seal.

    12 Bolt GM Rearend Differential Cover Gasket

    - Pressed composite
    - Fits GM cover (part number 550-3784)
    - 12 bolt GM differentials

  • 1970 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1970 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1970 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • 1963-64 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1963-64 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1963-64 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Steel rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 3" backspace.

    NSRA Legal

    910-31933 Instructions (PDF)

  • ARP Fasteners 200-2902 Chevy Flexplate Bolts
    ARP Fasteners 200-2902 Chevy Flexplate Bolts
    x
                

    Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-Pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flexplate register
    • Originally developed for NASCAR Winston Cup competition
    • 200,000 psi rating
  • ARP Fasteners 200-2802 Chevy Flywheel Bolts
    ARP Fasteners 200-2802 Chevy Flywheel Bolts
    x
                

    Flywheel bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flywheel register
    • Originally developed for NASCAR Winston Cup competition
    • Has a 200,000 psi rating
  • Watts Link
    $69.99
    Product Rating: 4.00 Stars
    Watts Link
    x
                Gives you better control than a Panhard Bar. Perfect for coil spring or coil-over rear suspension. For chassis widths of 46" or less. Threaded approximately 2 “ on each end. 

    Kit includes:

    • mounting brackets
    • rod (19" threaded for 1/2" rod ends)
    • jam nuts
    • all required hardware

    Watts Link Illustration

  • Universal Quick Change Look Rear End Cover, Raw
    Universal Quick Change Look Rear End Cover, Raw
    x
                

    The great look of a 'Quick Change' rear end at a fraction of the price. Universal style that can be trimmed to fit any rear axle.

    916-47903 Instructions (pdf)

     

  • Universal Quick Change Look Rear End Cover, Polished
    Universal Quick Change Look Rear End Cover, Polished
    x
                

    The great look of a 'Quick Change' rear end at a fraction of the price. Universal style that can be trimmed to fit any rear axle.

    Quick Change Rearend Cover Installation Instructions (pdf)

     

  • Heavy Duty Rear 4-Link Kit
    $349.99
    Product Rating: 5.00 Stars
    Heavy Duty Rear 4-Link Kit
    x
                This heavy duty adjustable rear four-link kit is just the ticket for heavy or serious horsepower applications. Includes frame brackets, rear axle brackets, upper and lower shock brackets, 3/4” rod ends, jam nuts and 14” threaded 1” o.d. tubes, bolts and washers.
            
  • Transverse Rear Leaf Spring Perch Kit
    Transverse Rear Leaf Spring Perch Kit
    x
                

    Perch welds to your square or rectangular rear crossmember when using a 2-1/4" wide transverse leaf spring. Plain U-bolts included. Rear perch is made from .25" thick steel.

  • Aluminum Rear End Oiling Can, 24 Oz., -8 AN
    Aluminum Rear End Oiling Can, 24 Oz., -8 AN
    x
                This 24 oz. aluminum canister holds enough rear end lube to fill standard Winters or Franklin quick change rear ends. It features a single -8 AN male fitting on the bottom of the canister and includes a steel cap. Canister is 7-1/2" tall and 3-1/4" in diameter.
            
  • Deluxe Coil-Over Rear Suspension Kit, Chrome
    Deluxe Coil-Over Rear Suspension Kit, Chrome
    x
                

    This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a chrome plated steel panhard bar, chrome plated Carrera coil-over shock assemblies, chrome plated steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

    Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

    Spring Rate Guide (GIF) 

    Coil-Over Mounting Guide (GIF)  

    916-49065 Instructions (PDF)

  • Deluxe Shockwave Rear Suspension Kit, Plain, 13 Inch Ride Height
    Deluxe Shockwave Rear Suspension Kit, Plain, 13 Inch Ride Height
    x
                

    These Deluxe Shockwave rear suspension kits feature smooth-riding Ridetech Shockwave air shocks and compressor. These 7000 series Shockwaves are 4" in diameter and have a load capacity of 780 lbs. @ 100 psi air pressure. They work well with a rear axle weight of 1500 lbs. or less. No air tank is required.

    Kit includes two Shockwave air-over-shocks, air compressor, air control panel, plain steel panhard bar, two plain steel 32" radius rods with mounting brackets, and all necessary hardware.

    916-49070 Instructions (PDF)

  • Deluxe Shockwave Rear Suspension Kit, Chrome, 13 Inch Ride Height
    Deluxe Shockwave Rear Suspension Kit, Chrome, 13 Inch Ride Height
    x
                

    These Deluxe Shockwave rear suspension kits feature smooth-riding Ridetech Shockwave air shocks and compressor. These 7000 series Shockwaves are 4" in diameter and have a load capacity of 780 lbs. @ 100 psi air pressure. They work well with a rear axle weight of 1500 lbs. or less. No air tank is required.

    Kit includes two Shockwave air-over-shocks, air compressor, air control panel, plain steel panhard bar, two polished stainless steel 32" radius rods with mounting brackets, and all necessary hardware.

    916-49080 Instructions (PDF)

Goto Previous PagePrevious Page
1 2