Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"gasoline fuel fittings" Page 1 of 3

  • Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    x
                

    Hilborn's factory flow-tested mechanical fuel pumps can be used with gas, alcohol or nitro applications. Rotation can be easily reversed to accommodate cam drives or belt drives.

    This billet aluminum pump is almost 1-1/2 lbs. lighter than the cast aluminum model. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings. Includes "Y" fitting which converts one #8 outlet to three #6 outlets. 

    Sizes: #00, #0, #S0, #1/2

    The full range of capacity from size #00 through size #1/2 is from .67gpm to 2.22gpm. All pumps rated at 1800rpm with 50psi. 

     

  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Willys Carbs WCD892 Gasoline Fuel Pressure Regulator
    Willys Carbs WCD892 Gasoline Fuel Pressure Regulator
    x
                

    Willy's fuel pressure regulator features a special diaphragm that uses engine vacuum to automatically regulate fuel pressure. At idle or deceleration, when manifold vacuum is high, the fuel regulator opens and drops fuel pressure for clean restarts and keeps carburetor from flooding or blubbering in the corner. As the throttle is opened, manifold vacuum drops which closes the fuel pump regulator and raises pressure for proper straightaway fuel mixture.

    This bypass fuel regulator is designed to be used with a piston-style mechanical fuel pump only.  Adjsutable fuel regulator has a -8 AN O-ring female inlet port and a -8 AN male return fitting. Requires a fuel return line and vacuum port (base plate or intake manifold) for installation.

    800-892 Instructions (PDF)

  • Speedway Small Cobra Style Gas Cap
    Speedway Small Cobra Style Gas Cap
    x
                

    This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

    • Fully polished aluminum construction
    • Small Cobra Gas Cap is vented
    • Latch style flip top cap 
    • Cap measures 2-1/2" diameter
    • Hose fitting measures 2" diameter
  • Black Push-On Hose, -10 AN
    From: $12.99
    Black Push-On Hose, -10 AN
    x
                

    AN10 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Black Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 3.00 Stars
    Black Push-On Hose, -8 AN
    x
                

    AN8 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the hig end of the parameter, hose clamps shoudl be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Holley 0-80803HB Ultra HP Gas 750 CFM 4 Barrel Carburetor
    Holley 0-80803HB Ultra HP Gas 750 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80804HB Ultra HP Gas 4 Barrel Carburetor, 850 CFM
    Holley 0-80804HB Ultra HP Gas 4 Barrel Carburetor, 850 CFM
    x
                

    Holley HP™ four barrel Carburetors have been the standard in racing carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 850 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
    Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80801HB Ultra HP Gas 600 CFM 4 Barrel Carburetor
    Holley 0-80801HB Ultra HP Gas 600 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80805HB Ultra HP Gas 950 CFM 4 Barrel Carburetor
    Holley 0-80805HB Ultra HP Gas 950 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ four barrel Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 950 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Ricks Tanks 1011 1955-57 Chevy Carbureted Steel Fuel Tank, 16 Gallon
    Ricks Tanks 1011 1955-57 Chevy Carbureted Steel Fuel Tank, 16 Gallon
    x
                

    These 1955-57 Chevy car fuel tanks from Rick's Tanks are hand formed from 304 grade stainless steel and are a direct replacement for your original gas tank. Ricks Tanks feature a unique interal baffling system not found in O.E. tanks to control fuel tank slosh. The baffling runs from front to rear, side to side, and surrounds the fuel pickup to eliminate fuel starvation during acceleration and hard braking. All fittings and flanges are also CNC turned 304 stainless steel to ensure a proper seal.

    Carb type tanks have a 3/8" NPT top feed outlet fitting and a 1/4" NPT vent fitting. Each tank comes with stainless mounting straps and hardware, and all tanks have a brushed finish for easy up-keep.

    Note:   this tank is intended to only work in conjunction with a reproduction smooth floor pan.  It does not have the corresponding recess for the spare tire
    that is needed for a stock floor pan with a well for the spare tire.

  • Ricks Tanks 1091 1969 Camaro 16 Gal. Carbureted St. Steel Fuel Tank
    Ricks Tanks 1091 1969 Camaro 16 Gal. Carbureted St. Steel Fuel Tank
    x
                Rick's Tanks fuel tanks are hand formed from 304 grade stainless steel and are a direct replacement for your original Camaro gas tank. Ricks Tanks feature a unique interal baffling system not found in O.E. tanks to  control fuel tank slosh. The baffling runs from front to rear, side to side, and  surrounds the fuel pickup to eliminate fuel starvation during acceleration and  hard braking. All fittings and flanges are also CNC turned 304 stainless steel to ensure a proper seal. 

    Carb type tanks have a 3/8" NPT top feed outlet fitting and a 1/4" NPT vent fitting. Each tank comes with stainless mounting straps and hardware, and all tanks have a brushed finish for easy up-keep.
  • Ricks Tanks 1081 67-68 Camaro 16 Gallon Carbureted St. Steel Fuel Tank
    Ricks Tanks 1081 67-68 Camaro 16 Gallon Carbureted St. Steel Fuel Tank
    x
                Rick's Tanks fuel tanks are hand formed from 304 grade stainless steel and are a direct replacement for your original Camaro gas tank. Ricks Tanks feature a unique interal baffling system not found in O.E. tanks to  control fuel tank slosh. The baffling runs from front to rear, side to side, and  surrounds the fuel pickup to eliminate fuel starvation during acceleration and  hard braking. All fittings and flanges are also CNC turned 304 stainless steel to ensure a proper seal. 

    Carb type tanks have a 3/8" NPT top feed outlet fitting and a 1/4" NPT vent fitting. Each tank comes with stainless mounting straps and hardware, and all tanks have a brushed finish for easy up-keep.
  • Black Push-On Hose, -12 AN
    From: $17.99
    Product Rating: 5.00 Stars
    Black Push-On Hose, -12 AN
    x
                

    AN12 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Black Push-On Hose, -6 AN
    From: $9.99
    Product Rating: 5.00 Stars
    Black Push-On Hose, -6 AN
    x
                

    AN6 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push on fittings
    • When using at temp and pressure at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    x
                

    These vintage style brushed aluminum gas tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.

    • Has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom
    • Mounting brackets sold separately
    • Brushed aluminum finish 
    • 3-1/2 gallon, 16" x 8"
  • Speedway Large Cobra Style Gas Cap
    Speedway Large Cobra Style Gas Cap
    x
                

    This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

    • Fully polished aluminum construction
    • Large Cobra Gas Cap is vented
    • Flip top style cap with roller latch
    • Cap measures 4-5/8" diameter
    • Mounting base measures 5-1/8" diameter
    • Hose fitting measures 2" diameter
  • Aeroquip FBU0800 Starlite Hose, -8 AN
    Aeroquip FBU0800 Starlite Hose, -8 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Kinsler Fuel Injection 3112 Fuel Line Bypass Pill Holder
    Kinsler Fuel Injection 3112 Fuel Line Bypass Pill Holder
    x
                A must for alky high-volume pumps. Anodized for alky fuels. 2 lb spring included. Outside safety pin. 7 lb or 12 lb bypass spring available. AN6 fittings.

    Can be used as a bypass pressure relief valve for alky or gas carburated fuel systems when installed in a return bypass line. We suggest using the 7lb spring and a 150 pill for the alky application.

  • Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    Carter M60968 Small Block Ford 172 GPH Racing Fuel Pump
    x
                

    Carter Super mechanical pumps contain heavy-duty diaphragms, high speed anti-float springs, large full flow valves, lightweight all-aluminum castings and a tough, heat-treated lever. The fittings are installed at the factory, not welded on like many competitors. Plus, they are made of steel to resist damage from cross threading.

    • AN 10 inlet fitting, AN 8 outlet fitting
    • Rated 172 GPH flow
    • 6-8 PSI (no regulator required)
    • Viton check valves
    • SOTO diaphrams
    • Gas only! Not for use with alcohol
  • Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    x
                

    This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Paper elements are for use with gasoline fuel only. NOT compatible with ethanol fuel (E10, E85).

    Filter has a 10" length with multiple AN fitting sizes available including -6 AN, -8 AN, -10 AN, and -12 AN.  

  • Jiffy-Tite 300C1 Quick Connect Carb Fitting Kit, Gasoline
    Jiffy-Tite 300C1 Quick Connect Carb Fitting Kit, Gasoline
    x
                Available in AN8 thread size with fluorocarbon seals standard for gasoline.  Methanol applications require buna seals to eliminate swelling.  Kit includes 2 plugs and 2 sockets and provides minimal flow restriction.  Features reusable type hose end sockets to be used with AN8 braided stainless steel Aeroquip type hose such as 617-308-length.  Carb fitting plug features 7/8"-20 thread to fit Holley 4150/4160 dual feed carburetors.
            
  • Stainless Steel Braided Hose, -6 AN
    From: $11.99
    Product Rating: 5.00 Stars
    Stainless Steel Braided Hose, -6 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels. 

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels. 

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • Edelbrock 17000 Victor Billet Small Block Chevy Mechanical Fuel Pump
    Edelbrock 17000 Victor Billet Small Block Chevy Mechanical Fuel Pump
    x
                

    Edelbrock Victor Series billet aluminum mechanical fuel pumps are for high performance racing applications. The 5/8"-18 inlet and outlet come with -8AN fittings installed to provide increased flow over street fuel pumps, and the base can be rotated to allow for various fuel line configurations. These billet aluminum pumps produce 8.5-9 psi and require a pressure regulator.

    • For use with gasoline or alcohol
    • Flows up to 170 GPH
    • Superior materials: 100% machined from billet 6061-T6 aluminum
    • Quality construction CNC-machined to exact tolerances
    • Tough design with stronger mount for increased durability
    • Clear anodized finish with the Edelbrock logo laser engraved on the pump body
    • Clockable lower housing can be rotated for best inlet/outlet alignment
    • -8 AN fittings installed
    • Includes mount gasket and bolts

    325-17000 Instructions (PDF)

  • Speedway Red Electric Fuel Pump
    Speedway Red Electric Fuel Pump
    x
                

    Speedway Electric fuel pump is a standard pressure street pump for gasoline only. It has a maximum pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. 

    • Internally regulated at 7 psi
    • Gravity fed fuel "pusher" design
    • Mount below lowest point of fuel tank
    • 3-1/2" from mounting bracket surface to the very front of the pump
    • Fittings with pump are for 3/8" hose
  • Stainless Steel Braided Hose, -10 AN
    From: $16.99
    Stainless Steel Braided Hose, -10 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels.

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels.

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • EMPI 3897 Polished Stainless Steel Fuel Tank, 10 x 30 Inch, End Fill, 9.5 Gallon
    EMPI 3897 Polished Stainless Steel Fuel Tank, 10 x 30 Inch, End Fill, 9.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 30"
    • End location filler neck
    • 9-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3896 Polished Stainless Steel Fuel Tank, 10 x 24 Inch, End Fill, 7.5 Gallon
    EMPI 3896 Polished Stainless Steel Fuel Tank, 10 x 24 Inch, End Fill, 7.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 24"
    • End location filler neck
    • 7-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

     

  • EMPI 3899 Polished Stainless Steel Fuel Tank, 10 x 40 Inch, End Fill, 13.5 Gallon
    EMPI 3899 Polished Stainless Steel Fuel Tank, 10 x 40 Inch, End Fill, 13.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 40"
    • End location filler neck
    • 13-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3898 Polished Stainless Steel Fuel Tank, 10 x 33 Inch, End Fill, 10.5 Gallon
    EMPI 3898 Polished Stainless Steel Fuel Tank, 10 x 33 Inch, End Fill, 10.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 33"
    • 1/4" NPT
    • End location filler neck
    • 10-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    x
                

    This Kinser diaphragm bypass is used for secondary or high speed bypass on long tracks. Has a restrictor jet provision, neoprene diaphragm for gasoline or methanol, and a hard-anodized aluminum housing. Simple adjustable pop-off pressure using a balde screwdriver and 7/16" wrench.

    Includes -6 AN male flare fittings.

  • EMPI 3895 Polished Stainless Steel Fuel Tank, 10 x 16 Inch, Center Fill, 5 Gallon
    EMPI 3895 Polished Stainless Steel Fuel Tank, 10 x 16 Inch, Center Fill, 5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 16"
    • Center location filler neck
    • 5 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Socketless Reusable Push-On Hose End for -6 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -6 AN Fitting, 45 Degree
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Jet Wrench
    $10.99
    Product Rating: 5.00 Stars
    Jet Wrench
    x
                          No need to remove your carburetor or distributor to handle jet replacement, with Speedway Motors' Holley Jet Wrench!

    Speedway has been racing for more than 50 years, and saw the need for a handy wrench to make Holley rear jet replacement easier. The wrench's precision designed tip fits snugly into the jets. Poor fitting and misaligned screwdrivers can cause external jet damage and affect fuel flow.

    The short size and 90-degree end provides just the angle needed to properly loosen and snug jets into place, while easily working between the distributor and carb. The opposite end of the wrench is designed to handle bowl screw removal, opening the gas level plug, as well as float screw adjustment.

Goto Previous PagePrevious Page
1 2 3