Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"gas tank cover" Page 1 of 2

  • Fuel Tank Sealer, Quart
    $27.99
    Product Rating: 4.75 Stars
    Fuel Tank Sealer, Quart
    x
                

    This tank sealer seals gas tanks, aluminum, and even rusty steel. Not affected by fuel additives, octane boosters, ATF hydraulic fluid, brake fluid or oil. Remains flexible. One quart.

    • STAYS FLEXIBLE – Will never crack or peel off.
    • ALCOHOL RESISTANT – No expensive come-backs.
    • BRIGHT BLUE COLOR – Both you and your customer can see results.
    • COVERS RUST – Seals old rust in and prevents future rusting.
    • SEALS LEAKS – Gets the multitude of pin-holes you can’t find.

    *Cannot Ship By Air*

    910-16752 Instructions (PDF)

    Tank Sealer FAQ (PDF)

    Material Safety Data Sheet (PDF)

     

     

  • Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    x
                

    These replacement front covers are perfect for your fuel cell with a 7" x 12" opening.  They are designed to fit the front side of the tank for your Sprint car and feature quality aluminum construction.

    • Replacement cover
    • Fits front of fuel cell
    • 7" x 12"
    • Aluminum
  • 1933-34 Chevy Standard Fiberglass Gas Tank Cover
    1933-34 Chevy Standard Fiberglass Gas Tank Cover
    x
                

    Fiberglass fuel tank cover for 1933-1934 Chevy Standard. Features a glossy gelcoat finish that is ready for paint preparations.

    Chevrolet Spotters Guide (Link)

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • 1933-34 Chevy Master Fiberglass Gas Tank Cover
    1933-34 Chevy Master Fiberglass Gas Tank Cover
    x
                

    Fiberglass fuel tank cover for 1933-1934 Chevy Master. Features a glossy gelcoat finish that is ready for paint preparations.

    Chevrolet Spotters Guide (Link)

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • Gas Tank Etch
    $12.99
    Product Rating: 5.00 Stars
    Gas Tank Etch
    x
                

    Cleans light rust from inside old fuel tanks. An excellent prep for your gas tank before introducing gas tank sealer. Leaves behind a gray phosphate coating.

    Non-flammable, non-toxic, non-corrosive. One 16 oz. bottle will cover a 30 gallon tank.

    CANNOT BE SHPPED BY AIR!

  • Exo-Coat Exterior Fuel Tank Sealant, 1 Pint
    Exo-Coat Exterior Fuel Tank Sealant, 1 Pint
    x
                Use this external fuel tank sealer to protect and restore various applications such as fuel tanks, pontoon floats, floating docks, or barges.  It's as easy as brushing it on and letting it air dry.  Great for sealing minor rust and pin holes as well.
    • For use on external rust
    • Urethane coating formulated specifically for adhesion to metal fuel tanks
    • Just brush it on and let it air dry
    • Light rust and pin holes are sealed
    • 1 Pint covers 2 average size fuel tanks

    *Cannot Ship By Air*

    910126 Instructions (PDF)

    Exo-Coat Material Safety Data Sheet (PDF) 

    Tank Sealer FAQ (PDF)

     

  • 1932 Ford Fuel Tank Access Cover Plate
    1932 Ford Fuel Tank Access Cover Plate
    x
                These fuel tank access cover plates are made of quality steel and feature a painted factory black finish.
    • For 1932 Fords
    • Accurate copy of the original metal plate that covers fuel tank
    • Fits rear floor
  • Fuel Tank Liner Kit
    $50.99
    $63.99
    Fuel Tank Liner Kit
    x
                Please view the product's page for more information
            
  • T-Bucket Aluminum Fuel Tank for Channeled Body
    T-Bucket Aluminum Fuel Tank for Channeled Body
    x
                

    This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a raised fill neck w/ cap, AN-6 fuel pickup, and a rollover vent. Designed to be mounted to the left side which leaves room for your battery. Has a 10.4 gallon capacity. 

    • Pre-cut hole for fuel level sender
    • Can use LH swing sender only
    • Rollover vent valve included
    • Includes non-vented cap
    • Fuel outlet (AN-6) is on the side of the tank
    • Fuel gauge sending unit is NOT included and will need to be purchased separately.

     

    This tank WILL clear the deck lid when used in conjunction with a channeled Speedway Body. 

    Note:  Fuel gauge sending unit is not included and will need to be purchased separately.

     

  • Tanks Inc 32P 1932 Ford Polyethylene Gas Tank
    Tanks Inc 32P 1932 Ford Polyethylene Gas Tank
    x
                This inexpensive, 14 gallon capacity poly tank comes with a fiberglass cover and a bolt-on steel neck with a billet cap. The neck and cover can be painted to match your car for a total original look. (The bottom of tank will be a contrasting black).

    This tank also features a top mounted pick-up tube, internal baffling, roll over vent valve, sender mount for all aftermarket senders, and has been leak tested.

    Note:  Frame/Cross bar shown in photo are for installation/photo purposes only and are not included with this tank.

  • 1934 Dodge Sedan Gas Tank Cover
    1934 Dodge Sedan Gas Tank Cover
    x
                              Fiberglass construction. Measures 48-1/2" long. Ships oversize UPS.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1931-1932 Chevy Fuel Tank Covers
    1931-1932 Chevy Fuel Tank Covers
    x
                

    Fiberglass construction. Ships as oversize UPS.

    •  Total Length: 46"
    •  Total Width: 11"
    •  6 1/2" Thick
    •  Front Width: 37 1/2"

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Chevrolet Spotters Guide (Link)

  • 1933 Dodge Sedan Gas Tank Cover
    1933 Dodge Sedan Gas Tank Cover
    x
                            Fiberglass construction. Measures 44-1/2" long. Ships oversize UPS.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    x
                

    This fabricated aluminum fuel cell is built for our 1923 T-bucket kits with a 20" pick-up box. Made from 5051 aluminum and tig welded for strength. Includes mounting tabs to make installation easy and it features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Measures 9-1/2" x 12-1/4" x 30-1/4". Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity. 

    This tank will NOT clear the deck lid when used in conjunction with a channeled Speedway body. It will work great with flat floor bodies. Use tank 715-752 if you have a channeled body. 

    • 30-1/4" long
    • 12-1/4" wide
    • 9-1/2" tall
    • 14 gallon
    • Built for our 1923 T-Bucket kits with a 20" pickup box
    • Should be used with the un-channeled bodies
    • Features a 240-33 ohm sending unit
    • Feature a flush mount fill neck/cap
    • Designed to be mounted to the left side, which leaves room for your battery
  • 1932 Ford Tank Cover
    $99.99
    1932 Ford Tank Cover
    x
                1932 Ford tank cover. Fiberglass construction.

    This product is made to order.
    Please allow six to ten weeks for lead time.
  • Fuel Safe CP6X10 Aluminum 6 x 10 Inch Sprint Fuel Cell Cover Plate w/ Wear Guard
    Fuel Safe CP6X10 Aluminum 6 x 10 Inch Sprint Fuel Cell Cover Plate w/ Wear Guard
    x
                

    These replacement front covers are perfect for your fuel cell with a 6" x 10" opening.  They are designed to fit the front side of the tank for your Sprint car and feature quality aluminum construction. Wear guard included.

    • .063 Inch thick
    • Sprint and Midget
    • Wear guard
  • Sprint Car Tail Tank Thermal Cover
    Sprint Car Tail Tank Thermal Cover
    x
                Fits standard outlaw style tank.
            
  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Aeromotive 18665 Stealth Fuel Cell, 20 Gallon
    Aeromotive 18665 Stealth Fuel Cell, 20 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Saldana Racing Products FTA OMS216-TRA 16 Gallon Complete Retro Tank
    Saldana Racing Products FTA OMS216-TRA 16 Gallon Complete Retro Tank
    x
                

    Kit features complete tank, bladder, fire resistant foam insert, cover plate, fuel pick-up kit, and hardware.

    Alcohol only, no gas.

    Bulkhead Diagram (PDF)

  • Hagan Street Rods 90 RQ 90   Curve Series LH Hinge Fuel Door, Door
    Hagan Street Rods 90 RQ 90 Curve Series LH Hinge Fuel Door, Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90104
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90OVQ 90   Curve Series LH Hinge Fuel Door, Oval
    Hagan Street Rods 90OVQ 90 Curve Series LH Hinge Fuel Door, Oval
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90103
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2" x 4-3/4" oval. It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90 SQ 90   Curve Series LH Hinge Fuel Door, Square
    Hagan Street Rods 90 SQ 90 Curve Series LH Hinge Fuel Door, Square
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90105

    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

     

  • Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" square
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     Fuel Door Curvature Template (PDF)

  • Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" round
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 4-3/4" x 3-1/2" oval
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
  • Aeromotive 18661 A1000 Fuel Cell, 20 Gallon
    Aeromotive 18661 A1000 Fuel Cell, 20 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes an A1000 fuel pump w/ 100 micron stainless fuel filter (filter pre-installed into p/u tube)
    • Supports up to 1700HP
    • Works with both carbureted and EFI systems
    • Return line provisions
    • AN8 valve/vents and return port
    • AN10 pump outlet
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish

    910-18661 Instructions (PDF)

  • Aeromotive 18660 A1000 Fuel Cell, 15 Gallon
    Aeromotive 18660 A1000 Fuel Cell, 15 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes an A1000 fuel pump w/ 100 micron stainless fuel filter
    • Supports up to 1700HP
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish

    910-18660 Instructions (PDF)

  • 1933 Dodge/Plymouth Sedan Fiberglass Rear Fenders
    1933 Dodge/Plymouth Sedan Fiberglass Rear Fenders
    x
                

    1933 Dodge and Plymouth sedan rear fenders of fiberglass construction. Features a glossy gelcoat finish that is ready for paint preparations. May require modification to match gas tank cover. Left or right available.

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1934 Dodge/Plymouth Sedan Fiberglass Rear Fenders
    1934 Dodge/Plymouth Sedan Fiberglass Rear Fenders
    x
                

    1934 Dodge and Plymouth sedan rear fenders of fiberglass construction. Features a glossy gelcoat finish that is ready for paint preparations. May require modification to match gas tank cover. Left or right available.

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Stainless Braided Radiator Hose Cover, 1-1/2 to 2 Inch O.D.
    Stainless Braided Radiator Hose Cover, 1-1/2 to 2 Inch O.D.
    x
                Use in conjunction with Tube Seal™ Hose Ends.  Duplicates the appearance of far more expensive stainless steel braided  hose and fittings. Fits over 1-1/2" - 2" O.D. hose. 

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.
  • RCI RCI-1042C Mini Sprint Steel Fuel Cell, 4 Gallon Capacity
    RCI RCI-1042C Mini Sprint Steel Fuel Cell, 4 Gallon Capacity
    x
                These Mini Sprint fuel cells have a 4 gallon capacity with an included flapper with lid assembly.  They come red powder coated and spot welded, ready to install.
    • Tank has a 4 gallon capacity
    • 9" L x 10" W x 18" H
    • 8 AN male pick-up, 8 AN male rollover vent
    • Lid assembly includes flapper
    • Red powder coated and spot welded
  • Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVF 90 Degree Flat Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVF 90 Degree Flat Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90SF 90 Degree Flat Series LH Hinge Square Fuel Door
    Hagan Street Rods 90SF 90 Degree Flat Series LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • RCI 22 Gallon Teardrop Steel Fuel Cell
    From: $269.99
    RCI 22 Gallon Teardrop Steel Fuel Cell
    x
                

    RCi Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder. Pickup hose is designed to pick up from right rear corner. All cans are spotwelded and powdercoated in your choice of Red, White or Black.

    • 22 gallon capacity
    • Includes a flapper on lid assembly    
    • AN10 male pick-up (right rear)
    • AN8 male rollover vent
    • AN8 return
    • 26.75" L x 24.75" W x 16.5" H
  • Threaded Steel Weld Bung Fitting, 1/8 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/8 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.

    Threaded Steel Weld Bung Fitting

    • 1/8 Inch NPT
    Fitting Thread Application Chart (GIF)
  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Threaded Aluminum Weld Bung Fitting, 1/8 Inch NPT Female
    Threaded Aluminum Weld Bung Fitting, 1/8 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from solid aluminum and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Aluminum female pipe thread weld bung fitting.

    Threaded Aluminum Weld Bung Fitting

    • 1/8 Inch NPT

    Fitting Thread Application Chart (GIF)

     

Goto Previous PagePrevious Page
1 2