Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fuel line kits" Page 1 of 11

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Professional Products 10415 Holley 4150 Dual Feed Fuel Line Kit, -8 AN
    Professional Products 10415 Holley 4150 Dual Feed Fuel Line Kit, -8 AN
    x
                These dual feed fuel line kits give you the looks, performance and flexibility your car deserves. Fuel log features -8 AN inlet, 1/8" NPT tapped fuel pressure gauge port, and allows you to have a fuel tank return if needed.

    Fuel line fits Holley 4150 style Double Pumper carburetors with 7/8"-20 inlets.

  • LS1 Fuel Filter/Fuel Regulator Kit
    LS1 Fuel Filter/Fuel Regulator Kit
    x
                

    To make your LS1 swap a little less painful, we put together these 2-in-1 fuel filter and fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805. 

    This kit includes required fuel rail fitting along with the filter/regulator assembly. The EFI fuel regulator pressure is fixed at 58 psi. Hose and additional fittings sold separately.

    • Principal Application:  Chevrolet Corvette (99-04)
    • Style:  Fuel (Complete In-Line) Filter
    • Service:  Fuel
    • Type:  Full Flow
    • Media:  Paper
    • Nominal Micron Rating:  5
  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

  • Two Plain 9 Super 7   Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    Two Plain 9 Super 7 Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Lawn Mower & Motorcycle Fuel Tank Liner Kit
    Lawn Mower & Motorcycle Fuel Tank Liner Kit
    x
                

    Fuel tank liner is easy to use and effective  when the directions are followed closely. It internally seals the multitude of small leaks that often form due to age, rust or  where the straps wrap around the tank. If you fix the major obvious leaks, this fuel tank liner seals the rest! Liner is resistant to gasoline, diesel  fuel, alcohol and other fuels or fuel additives. It is designed to seal new or existing fuel tanks with minor leaks. Contrary to what some people will tell you, rust does form  inside gas tanks. The cause is condensation and water in the fuel. Seals rust under the liner coating so it cannot flake off to plug fuel-line filters or cause  additional damage. Further rusting is also reduced.

    • Cleans, seals, and protects metal fuel tanks
    • For use with lawn mower, motorcycle, and other small engine fuel tanks
    • Takes you from start to finish with one kit!

    Kit includes:

    • 1 pint of Fuel Tank Cleaner
    • 1 pint of Fuel Tank Prep
    • 1 pint of Fuel Tank Liner

    *Cannot Ship By Air*

    Tank Liner FAQ (PDF)

    9101258 Tank Liner Tech Bulletin

  • Fuel Tank Liner Kit
    $50.99
    $63.99
    Fuel Tank Liner Kit
    x
                Please view the product's page for more information
            
  • Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
    Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
    x
                

    This Russell Performance electronic fuel injection system kit provides a complete fuel system for GM LS-series and Chrysler Hemi engine swaps in muscle cars, street rods and off-road vehicles. These kits include an in-line Edelbrock electric fuel pump, regulator/fuel filter assembly, fuel pump relay and wiring assembly, fifteen feet of Russell ProFlex hose, plus an assortment of traditional red and blue AN hose ends, adapters and mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles
    • Can support up to 600 hp at 40 psi
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
  • Braided Pressure Gauge Line Kit
    Braided Pressure Gauge Line Kit
    x
                This braided pressure gauge line kit makes it a snap to hook up your pressure gauge.  Can be used with oil, water, fuel or air. Includes AN 4 braided line,  AN4 to 1/8" NPT male and AN4 to 1/8" NPT female. Choose from lengths of  25", 36" or 48".
            
  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • Two Plain 9 Super 7   Carbs, Offenhauser 1075 Dual Intake, 1949-53 Ford V8
    Two Plain 9 Super 7 Carbs, Offenhauser 1075 Dual Intake, 1949-53 Ford V8
    x
                

    This kit uses the Offy Dual '49-'53 Flathead Ford intake with Speedway's 9 Super 7® carbs. It includes two carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. 

    Said to be its most popular flathead intake, Offenhauser’s 2x2 Regular intake has closely spaced carbs that will clear the stock generator. The Offy regular dual intake accepts two 3-bolt carbs. Great addition to a street oriented engine. Has 4-3/4" carb centers.

    The 9Super7® makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Be sure to include the Secondary 9 Super 7 when installing 3-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb

  • Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    x
                

    This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
    • Supports up to 450 HP
  • Atomic EFI Throttle Body Injection, Basic Kit
    Atomic EFI Throttle Body Injection, Basic Kit
    x
                

    Install Saturday Morning, Make the Cruise Saturday Night with the Atomic Basic kit. The Atomic EFI outshines the competition in ease of installation and performance! The MSD annular ring injection design produces an air/fuel charge with much better mixture as well as an even distribution among the cylinders that the competition cannot match. Better AFRs equal better idle quality, better starting, and better overall drivability throughout the rpm range. You and your engine will be glad when you Go Atomic.

    If your vehicle already has an electric fuel pump with a return line in place, you might not need to replace it. If this situation fits your car, you may want to consider this Basic Throttle Body Kit which comes with the Throttle Body, Power Module (with Wide Band O2 sensor), and Handheld Controller.

    • Bolts to standard 4 barrel intake manifold
    • 8 wire connection installation
    • Replaces standard square bore carburetor
    • Controls ignition timing
    • Integrated ECU and sensors
    • Single fuel line
    • Self-Tuning
    • No Laptop required
    • 5472910 Atomic EFI TBI Instructions (PDF)
  • FAST 30227-KIT EZ-EFI Self Tuning Fuel Injection Master Kit
    FAST 30227-KIT EZ-EFI Self Tuning Fuel Injection Master Kit
    x
                Please view the product's page for more information
            
  • Speedway Carter Fuel Pump Fuel Line Kit
    Speedway Carter Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with stainless hose
    • Ss - aluminum fittings with blue hose
    • Stl - steel fittings with blue hose
  • Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with blue rubber hose
    • Ss - aluminum fittings with stainless steel hose
    • Stl - steel fittings with blue rubber hose
  • Fuel Filler Hose Kits, 1-1/2 Inch I.D.
    Fuel Filler Hose Kits, 1-1/2 Inch I.D.
    x
                Installation kit includes your choice of 4",  8" or 12" length of fuel resistant 1-1/2" diameter hose and two tube clamps.
            
  • Professional Products 10416 Demon Carbs Dual Feed Fuel Line Kit, -8 AN
    Professional Products 10416 Demon Carbs Dual Feed Fuel Line Kit, -8 AN
    x
                These dual feed fuel line kits give you the looks, performance and flexibility your car deserves. Fuel log features -8 AN inlet, 1/8" NPT tapped fuel pressure gauge port, and allows you to have a fuel tank return if needed.

    Fuel line fits Demon carburetors with 9/16"-24 inlets.

  • Three Chrome 9 Super 7   Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    Three Chrome 9 Super 7 Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three chrome plated carbs, the plain finish aluminum intake, 4" chrome air cleaners, linkage kit, chrome fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carbure

  • Three Chrome 9 Super 7   Carbs, Edelbrock 1109 Intake Kit, 1949-53 Ford V8
    Three Chrome 9 Super 7 Carbs, Edelbrock 1109 Intake Kit, 1949-53 Ford V8
    x
                Please view the product's page for more information
            
  • Chrome 9 Super 7   Carbs, Offenhauser 1075 Dual Intake Kit, 1949-53 Ford V8
    Chrome 9 Super 7 Carbs, Offenhauser 1075 Dual Intake Kit, 1949-53 Ford V8
    x
                

    This kit uses the Offenhauser Dual 1949-1953 Flathead Ford V8 intake with 9 Super 7® carbs. In includes two carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required.

    Said to be its most popular flathead intake, Offenhauser’s 2x2 Regular intake has closely spaced carbs that will clear the stock generator. The Offy regular dual intake accepts two 3-bolt carbs. Great addition to a street oriented engine. Has 4-3/4" carb centers.

    The 9Super7 Carb ® makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Be sure to include the Secondary 9 Super 7 when installing 3-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7® in a 2x2 or 3x2

  • Three Chrome 9 Super 7   Carbs, Offenhauser 1074 Intake Kit, 1942-48 Ford V8
    Three Chrome 9 Super 7 Carbs, Offenhauser 1074 Intake Kit, 1942-48 Ford V8
    x
                Please view the product's page for more information
            
  • Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    x
                This hose end pipe fitting kit includes two brass fitting adapters, 1⁄4" NPT pipe thread to 3⁄8" I.D. hose, and two stainless hose clamps. Kit is very useful when hooking up fuel pressure regulator fittings, fuel block fittings, fuel pump fittings, and carburetor fittings.
            
  • Three Plain 9 Super 7   Carbs on Offenhauser 1074 Intake Kit, 1942-48 Ford V8
    Three Plain 9 Super 7 Carbs on Offenhauser 1074 Intake Kit, 1942-48 Ford V8
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 11