Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fuel line and fittings" Page 1 of 24

  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • 97-Style Carburetor Fuel Inlet Fitting, 1/2 Inch-20 to 5/16 Hose, Plain
    97-Style Carburetor Fuel Inlet Fitting, 1/2 Inch-20 to 5/16 Hose, Plain
    x
                

    These fittings adapt 5/16" fuel hose to our 9 Super 7 carb as well as Stromberg 97's and Ford/Holley 94's (all with 1/2"-20 inlet threads).

    Fits:

    • Stromberg 97
    • Ford/Holley 94 with 1/2"-20 threads
    • Speedway 9super7 
  • Aluminum Fuel Line, 3/8 Inch O.D.
    From: $10.99
    Product Rating: 4.67 Stars
    Aluminum Fuel Line, 3/8 Inch O.D.
    x
                Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
    • Use with tube nut couplers, sleeves and 37° flared AN fittings
    • Rated to 250 psi
    • Not recommended for high pressure (brake) applications
    • Available in 10 ft., 20 ft., or 30 ft. coils

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • LS1 Fuel Filter/Fuel Regulator Kit
    LS1 Fuel Filter/Fuel Regulator Kit
    x
                

    To make your LS1 swap a little less painful, we put together these 2-in-1 fuel filter and fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805. 

    This kit includes required fuel rail fitting along with the filter/regulator assembly. The EFI fuel regulator pressure is fixed at 58 psi. Hose and additional fittings sold separately.

    • Principal Application:  Chevrolet Corvette (99-04)
    • Style:  Fuel (Complete In-Line) Filter
    • Service:  Fuel
    • Type:  Full Flow
    • Media:  Paper
    • Nominal Micron Rating:  5
  • Straight Chrome Fitting, 3/8 Inch Hose to 3/8 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 3/8 Inch NPT
    x
                

    These chrome plated push-on brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 3/8" NPT adapter
    • Fuel line hose connector
    • Straight angle
  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Straight Chrome Fitting, 5/16 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 5/16 Inch Hose to 1/4 Inch NPT
    x
                

    These socketless chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb connector
    • 5/16" Hose to 1/4" NPT adapter
    • Straight angle
  • LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, Black
    LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, Black
    x
                
    • Direct replacement for OEM fuel rail and return line fittings in late-model EFI pressure side application
    • Exclusive SAE quick disconnect threaded aluminum retaining cap for ease of installation and positive engagement under high pressure
    • 37° sealing angle provides a positive seal at maximum operating pressures
    • Black anodized finish
  • Street Rod Fuel Cell -6 AN Pick-up w/ 14 Inch Hose
    Street Rod Fuel Cell -6 AN Pick-up w/ 14 Inch Hose
    x
                

    This fuel cell fuel pick-up kit includes a 14" length of blue rubber -6 AN push-on hose,  a -6 AN push-on hose fitting, -6 AN flared bulkhead fitting w/ nut, and HDPE sealing washers. Works great with our Street Rod Fuel Cells.

    Hose Fitting Sizing Chart (GIF)

  • Aluminum Fuel Manifold Fitting
    Aluminum Fuel Manifold Fitting
    x
                          This handy little aluminum fuel manifold fitting allows you to plumb all your return lines right at the injector. That saves you weight and space because you don't have to run all the lines back to the tank. Choose AN8 or AN10 to lead to three AN6 male ends.            
            
  • Black Socketless Straight Push-On Hose End Fitting, -6 AN
    Black Socketless Straight Push-On Hose End Fitting, -6 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. Straight fittings in multiple sizes.  For use with 37 degree flared ends.

    • -6 AN female to push-on hose barb adapter
    • Straight style fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black anodized finish

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

     

  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -6 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN female to push-on style adapter
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Works great with custom fuel lines
    • Available in Red/Blue corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 90 Degree
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 90 Degree
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. 90° elbow -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    • -6 AN female to push-on adapter
    • 90° elbow fuel line hose connector
    • 37° angled sealing surface guarantees a positive anti-leak seal

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 3/8 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 3/8 NPT
    x
                

    These chrome plated brass adapter fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" push-on hose to 3/8" NPT fuel line connector
    • 90 Degree angle
  • Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb end
    • 3/8" Hose to 1/4" NPT adapter
    • Straight angle line connector

     

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Black Anodized, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow push-on hose ends and see the difference.

    • -6 AN female to push-on style adapter
    • Straight
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Works great for custom fuel lines
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/4" NPT
    • 90 Degree angle
  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    x
                

    These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

    • AN to hose barb 
    • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
    • Use with Aeroquip Special Application blue hose
    • For use with 37° AN style fittings

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Speedway Aluminum Fuel Log for Holley Carburetor
    Speedway Aluminum Fuel Log for Holley Carburetor
    x
                

    This fuel log ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied, and not before. Must use return fuel line to take full advantage of benefits.

    Features -8 AN inlet and two -8 AN outlets. Threaded 3/4" NPT (plugged) on back that can be used for a return line. Carburetor fuel line also has 1/8" NPT outlet for fuel pressure gauge (fittings sold separately). 

    • 9-1/4" from fitting to fitting
    • Standard Holley spacing is 9-1/4"
  • Standard Tube Flaring Tool, 37 Degree AN
    Standard Tube Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish
    • Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.
  • Tight Fit 90 Degree Socketless Reusable Fittings
    Tight Fit 90 Degree Socketless Reusable Fittings
    x
                

    These tight fit 90° steel fittings work great for a variety of different applications.  They feature your choice of -4, -6, or -8 AN male/female ends with a corrosion resistant finish.

    • Working pressure of 5500 psi 
    • 90° steel fuel line hose connector
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Choose from -4 AN, -6 AN, or -8 AN sizes

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • Aeroquip Straight Full Flow Swivel Hose End Fitting, Red/Blue, -8 AN
    Aeroquip Straight Full Flow Swivel Hose End Fitting, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN female to push-on adapter
    • Straight style fuel line hose connector/coupler
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 5/16 Inch Female, Blue
    LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 5/16 Inch Female, Blue
    x
                
    • Direct replacements for OEM fuel rail and return line fittings in late-model EFI pressure side application
    • Feature Russell's exclusive SAE quick disconnect threaded aluminum retaining cap for ease of installation and positive engagement under high pressure
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Blue anodized finish
  • 97-Style Carburetor Fuel Inlet Fitting, 1/2 Inch-20 to 5/16 Hose, Chrome
    97-Style Carburetor Fuel Inlet Fitting, 1/2 Inch-20 to 5/16 Hose, Chrome
    x
                

    These fittings adapt 5/16" fuel hose to our 9 Super 7 carb as well as Stromberg 97's and Ford/Holley 94's (all with 1/2"-20 inlet threads).

    Fits:

    • Stromberg 97
    • Ford/Holley 94 with 1/2"-20 threads
    • Speedway 9super7 
  • Black 90 Degree Socketless Push-On Hose End Fitting, -6 AN
    Black 90 Degree Socketless Push-On Hose End Fitting, -6 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 90 degree fittings in multiple sizes.  For use with 37 degree flared ends.

    • -6 AN female to push-on hose barb adapter
    • 90° fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black anodized finish

    Socketless Push-On Hose Ends Application Chart (GIF)

     

  • Aeroquip FBU0800 Starlite Hose, -8 AN
    Aeroquip FBU0800 Starlite Hose, -8 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -6 AN
    x
                Please view the product's page for more information
            
  • Speedway Carter Fuel Pump Fuel Line Kit
    Speedway Carter Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with stainless hose
    • Ss - aluminum fittings with blue hose
    • Stl - steel fittings with blue hose
  • Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with blue rubber hose
    • Ss - aluminum fittings with stainless steel hose
    • Stl - steel fittings with blue rubber hose
  • Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    x
                Fittings  are an integral part of any  racing fuel system. Simplicity within a  fuel system is the idea behind  WRC's "Sure Seal" fittings. These  fittings are reverse flared  for maximum fuel flow and the hose end is  O-ringed for a "Sure Seal!" Eliminate the chance for leakage with the  use of these aluminum fittings.
            
  • Black Straight -6 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting
    Black Straight -6 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adaptors connect 1/4" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -6 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Straight Chrome Fitting, 3/8 Inch Hose to 1/8 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 1/8 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/8" NPT
    • Straight angle
  • Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    x
                This hose end pipe fitting kit includes two brass fitting adapters, 1⁄4" NPT pipe thread to 3⁄8" I.D. hose, and two stainless hose clamps. Kit is very useful when hooking up fuel pressure regulator fittings, fuel block fittings, fuel pump fittings, and carburetor fittings.
            
  • 90 Degree Socketless Push-On Hose End Fitting, -8 AN
    90 Degree Socketless Push-On Hose End Fitting, -8 AN
    x
                

    90° socketless push-on hose ends for 37° fittings.

    • -8 AN female to push-on hose barb adapter
    • 90° fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Socketless Push-On Hose Ends Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 24