Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fuel gauge line" Page 1 of 2

  • Braided Pressure Gauge Line Kit
    Braided Pressure Gauge Line Kit
    x
                This braided pressure gauge line kit makes it a snap to hook up your pressure gauge.  Can be used with oil, water, fuel or air. Includes AN 4 braided line,  AN4 to 1/8" NPT male and AN4 to 1/8" NPT female. Choose from lengths of  25", 36" or 48".
            
  • Fuel Gauge Interface Module
    $129.99
    Product Rating: 5.00 Stars
    Fuel Gauge Interface Module
    x
                Fuel level gauges are designed to work with  specific sending units that vary from one automobile or gauge  manufacturer to another. Some increase resistance from Empty to Full,  while others decrease as the level goes up. For a builder updating their  vehicle with new gauges, this presents a problem in that the  aftermarket gauges must match the sending unit located in the tank. This  module will allow you to use your stock sender with any fuel gauge. You  no longer have to remove the tank to add a separate sending unit or  modify the sending unit that comes with a aftermarket gauge set.
    • Simply wires in-line between your gauge and existing sender
    • Allows you to use your stock sender with any fuel gauge
    • No need to remove the tank to add a separate sending unit
     
    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units
  • Professional Products 10415 Holley 4150 Dual Feed Fuel Line Kit, -8 AN
    Professional Products 10415 Holley 4150 Dual Feed Fuel Line Kit, -8 AN
    x
                These dual feed fuel line kits give you the looks, performance and flexibility your car deserves. Fuel log features -8 AN inlet, 1/8" NPT tapped fuel pressure gauge port, and allows you to have a fuel tank return if needed.

    Fuel line fits Holley 4150 style Double Pumper carburetors with 7/8"-20 inlets.

  • 1961-64 Full Size GM Fuel Gauge Sending Unit without Return Line, 3/8 Inch Outlet
    1961-64 Full Size GM Fuel Gauge Sending Unit without Return Line, 3/8 Inch Outlet
    x
                

    These quality fuel sending units are designed as replacements for 1961-64 GM Full-size passenger vehicles.  They will work with factory style fuel level gauges.

    • 1961-64  Full Size
    • 3/8"outlet
    • No Return line
    • OEM Replacement fuel sender/pickup
    • Designed for use with factory fuel level gauge

    LH/RH Swing Guide (Link)

    Ohms Chart (Link)

  • 1961-64 Full Size GM Fuel Gauge Sending Unit with Return Line, 3/8 Inch Outlet
    1961-64 Full Size GM Fuel Gauge Sending Unit with Return Line, 3/8 Inch Outlet
    x
                

    These quality fuel sending units are designed as replacements for 1961-64 GM Full-size passenger vehicles.  They will work with factory style fuel level gauges.

    • 1961-64  Full Size
    • 3/8"outlet
    • With Return line
    • OEM Replacement fuel sender/pickup
    • Designed for use with factory fuel level gauge

    LH/RH Swing Guide (Link)

    Ohms Chart (Link)

  • Speedway 6 Gauge Set
    $209.99
    Speedway 6 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
      • Six gauge set includes 3 3/8” electric tach as well
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
    • Tachometer NOT for use with solid core wires
    • Tachometer MUST be used with a resistor core wire wire and plugs
  • Speedway 5 Gauge Set
    $159.99
    Speedway 5 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
  • Stewart Warner 301AW Green Line Fuel Level Gauge, 2-1/16 Inch
    Stewart Warner 301AW Green Line Fuel Level Gauge, 2-1/16 Inch
    x
                These Stewart Warner Performance Custom Deluxe  Green Line gauges feature original 1960s artwork and style. They have  polished stainless steel bezels, brushed silver centers, and black faces  with the famous green line. The Stewart Warner Performance Custom  Deluxe Green Line gauges are available in either 2-1/16 in. or 2-5/8 in.  diameters, in your choice of electrical or mechanical, depending on the  gauge style. Whether you are building a custom dash panel or mounting  gauges in a pre-fab panel, these Stewart Warner Performance Custom  Deluxe Green Line gauges bring back the look of old. 
    • 240 ohms empty, 33 ohms full
    • 180º sweep
    • 2-1/16" diameter
    • Electrical
    • Sending unit not included
  • Speedway Aluminum Fuel Log for Holley Carburetor
    Speedway Aluminum Fuel Log for Holley Carburetor
    x
                

    This fuel log ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied, and not before. Must use return fuel line to take full advantage of benefits.

    Features -8 AN inlet and two -8 AN outlets. Threaded 3/4" NPT (plugged) on back that can be used for a return line. Carburetor fuel line also has 1/8" NPT outlet for fuel pressure gauge (fittings sold separately). 

    • 9-1/4" from fitting to fitting
    • Standard Holley spacing is 9-1/4"
  • Auto Meter 4511 Pro-Comp Ultra-Nite Fuel Pressure Gauge
    Auto Meter 4511 Pro-Comp Ultra-Nite Fuel Pressure Gauge
    x
                

    Ultralight Auto Meter gauges with blue anodized bezel are designed for the extreme conditions of dirt track racing. 2-5/8" diameter. A sealed case keep moisture and debris out. Water proof so they can be hosed off after the races. A glow-in-the-dark face means they don't use light bulbs and eliminates need for light and battery. Keeps them simple and dry.


    For standard or electronic ignition.

    Mechanical Fuel Pressure Gauge Installation Instructions (PDF)

  • 1973-77 Buick / Chevy / Olds / Pontiac Fuel Gauge Sending Unit
    1973-77 Buick / Chevy / Olds / Pontiac Fuel Gauge Sending Unit
    x
                These quality fuel sending units are designed as  replacements for 1973-77 Buick/Chevy/Oldsmobile/Pontiac passenger vehicles.  They  will work with factory style fuel level gauges.
    • 73-77 BUICK/CHEVY/OLDS/PONT, EXCEPT STATION WAGON,
    • For cars  with AC
    • 3 OUTLETS
    • 3/8" Fuel line
    • OEM Replacement fuel sender/pickup
    • Designed for use with factory fuel level gauge

    LH/RH Swing Guide (Link)

    Ohms Chart (Link)

  • Professional Products 10416 Demon Carbs Dual Feed Fuel Line Kit, -8 AN
    Professional Products 10416 Demon Carbs Dual Feed Fuel Line Kit, -8 AN
    x
                These dual feed fuel line kits give you the looks, performance and flexibility your car deserves. Fuel log features -8 AN inlet, 1/8" NPT tapped fuel pressure gauge port, and allows you to have a fuel tank return if needed.

    Fuel line fits Demon carburetors with 9/16"-24 inlets.

  • Dual Quad Fuel Line for Edelbrock Carbs
    Dual Quad Fuel Line for Edelbrock Carbs
    x
                

    This fuel line is intended to connect two Edelbrock (or Carter) four-barrel carbs on a low-rise 2x4 intake. The inlet fitting thread is 3/8" NPT female, and there is a 1/8" NPT hole that can be used for a fuel pressure gauge. The outlets on this adjustable fuel log can be as close together as 6-1/2" and as far apart as 8-1/4". All of this carburetor fuel line is anodized blue, except for the central piece of braided stainless steel hose.

  • Auto Meter 5411 Liquid Filled Fuel Pressure Gauge
    Auto Meter 5411 Liquid Filled Fuel Pressure Gauge
    x
                

    These mechanical Pro-Comp Liquid Filled gauges are designed for racing applications with extreme vibrations or violent pounding.

    The bourbon tube gauge mechanism is encased in a special dampening fluid that absorbs all vibrations.  This protection not only provides steadiness to the pointer but also adds longer life to the instrument.

    The most rugged gauges available. These tough liquid filled mechanical gauges have more than 20 years of race proven heritage in the most extreme racing conditions. These mechanical gauges are designed for racing applications with extreme vibrations or violent pounding.

    Liquid Filled Fuel Pressure Gauge Installation Instructions (PDF)

  • Deluxe Flaring Tool, 37 Degree AN
    Deluxe Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • Auto Meter 4411 Ultra-Lite Fuel Pressure Gauge
    Auto Meter 4411 Ultra-Lite Fuel Pressure Gauge
    x
                

    Easy to read silver dials and high-contrast orange pointers with aluminum and plastic construction make this lightweight, race-proven gauge a competition favorite. A quality engineered bourdon tube mechanism provides proven durability and accuracy on these mechanical gauges.

    Mechanical Fuel Pressure Gauge Installation Instructions (PDF)

  • Auto Meter 3411 Sport Comp Fuel Pressure Gauge
    Auto Meter 3411 Sport Comp Fuel Pressure Gauge
    x
                

    Mechanical gauges have a trademarked competition appearance and provide rugged reliable performance. Gauges feature white markings on a black face and a fluorescent red pointer for quick-glance monitoring. The gauge mechanisms are quality engineered with a sealed bourdon tube and 270° sweep for maximum accuracy.

     Mechanical Oil Pressure Gauge Installation Instructions (PDF)

  • Speedway Aluminum Fuel Log for Demon Carburetor
    Speedway Aluminum Fuel Log for Demon Carburetor
    x
                

    Ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied and not before. Must use return fuel line to take full advantage of benefits.

    Features AN8 inlet and two AN8 outlets.  Threaded 3/4" NPT (plugged) on back that can be used for a return line. Also has 1/8" NPT outlet for fuel pressure gauge, fittings sold separately. 

  • Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • JAZ Products 270-008-NF Steel Can Fuel Cell, 8 Gallon
    JAZ Products 270-008-NF Steel Can Fuel Cell, 8 Gallon
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner

    Note: To meet the IMCA Sport Compact rules regarding the 8 gallon fuel cells, fuel tank flapper valve 458-315 must be purchased and used in conjunction with the fuel cell shown here. Or purchase an IMCA approved cell with a flapper valve already installed.

  • JAZ Products 271-222-NF 22 Gallon IMCA Steel Fuel Cell, 25.5x17-1/8x14
    JAZ Products 271-222-NF 22 Gallon IMCA Steel Fuel Cell, 25.5x17-1/8x14
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ 271-122-NF Steel IMCA 22 Gallon Can Fuel Cell, 34.5 x 18.75 x 10.5
    JAZ 271-122-NF Steel IMCA 22 Gallon Can Fuel Cell, 34.5 x 18.75 x 10.5
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 270-222-NF 22 Gallon Steel Fuel Cell, 25.5 x 17-1/8 x 14
    JAZ Products 270-222-NF 22 Gallon Steel Fuel Cell, 25.5 x 17-1/8 x 14
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • Fuelab 54502-1-G Mini Fuel Pressure Regulator, 90-125 PSI
    Fuelab 54502-1-G Mini Fuel Pressure Regulator, 90-125 PSI
    x
                

    Fuelab mini fuel pressure regulators have all the same great features with 50% less weight and a smaller size. These EFI fuel pressure regulators accept port style and non-port style union fittings without interference. These high pressure fuel regulators have a -6 AN return port in-line with the -6 AN inlet port (not on the bottom) which allows for easy installation in extremely tight locations.

    • Smaller and weighs 50% less than other fuel regulators
    • -6 AN inline female inlet and outlet ports
    • 1/8" NPT gauge port with plug for external pressure gauge
    • 1/8” NPT pressure reference port with barbed fitting
    • Compatible with gasoline, diesel, methanol and ethanol
    • 1.50" D x 2.00" W x 2.25" H
  • Fuelab 54501-1 Mini Fuel Pressure Regulator, 25-90 PSI
    Fuelab 54501-1 Mini Fuel Pressure Regulator, 25-90 PSI
    x
                

    Fuelab mini fuel pressure regulators have all the same great features with 50% less weight and a smaller size. These EFI fuel pressure regulators accept port style and non-port style union fittings without interference. The 545 Series high pressure fuel regulator has its -6 AN return port in-line with the -6 AN inlet port (not on the bottom) which allows for easy installation in extremely tight locations.

    • Smaller and weighs 50% less than other fuel regulators
    • -6 AN inline female inlet and outlet ports
    • 1/8" NPT gauge port with plug for external pressure gauge
    • 1/8” NPT pressure reference port with barbed fitting
    • Compatible with gasoline, diesel, methanol and ethanol
    • 1.50" D x 2.00" W x 2.25" H
  • Fuelab 51506-1-L-L Carbureted Fuel Pressure Regulator, 1-3 PSI
    Fuelab 51506-1-L-L Carbureted Fuel Pressure Regulator, 1-3 PSI
    x
                

    Gasoline, methanol, and ethanol fuel compatible for carbureted applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • Two -6AN inlets and one-6AN return port in-line
  • JAZ Products 270-122-NF 22 Gallon Steel Can Fuel Cell
    JAZ Products 270-122-NF 22 Gallon Steel Can Fuel Cell
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 270-016-NF Steel Can Fuel Cell, 16 Gallon
    JAZ Products 270-016-NF Steel Can Fuel Cell, 16 Gallon
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 270-004-NF Steel Can Fuel Cell, 4 Gallon
    JAZ Products 270-004-NF Steel Can Fuel Cell, 4 Gallon
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 271-1321-NF Steel Can Fuel Cell, 32 Gallon, IMCA Approved
    JAZ Products 271-1321-NF Steel Can Fuel Cell, 32 Gallon, IMCA Approved
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 271-016-NF Steel Can Fuel Cell, 16 Gallon, IMCA Approved
    JAZ Products 271-016-NF Steel Can Fuel Cell, 16 Gallon, IMCA Approved
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 270-132-NF Steel Can Fuel Cell, 32 Gallon
    JAZ Products 270-132-NF Steel Can Fuel Cell, 32 Gallon
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • JAZ Products 270-012-NF Steel Can Fuel Cell, 12 Gallon
    JAZ Products 270-012-NF Steel Can Fuel Cell, 12 Gallon
    x
                

    The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.

    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    x
                

    Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.

    The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.

    • Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
    • Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
    • Standard GM sender pack included
  • Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    x
                

    Gasoline, methanol, ethanol, and dieselfuel compatible for fuel injected applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • One -6AN inlet and one -6AN return port in-line
  • Fuelab 51504-1 Carbureted Fuel Pressure Regulator, 4-12 PSI
    Fuelab 51504-1 Carbureted Fuel Pressure Regulator, 4-12 PSI
    x
                

    Gasoline, methanol, and ethanol fuel compatible for carbureted applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • Two -6AN inlets and one-6AN return port in-line
  • Aeroquip FCC0610 -6 AN TFE Braided Hi Pressure Hose, 11/32 In ID-10 Ft
    Aeroquip FCC0610 -6 AN TFE Braided Hi Pressure Hose, 11/32 In ID-10 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0603 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 3 Ft
    Aeroquip FCC0603 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 3 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0606 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 6 Ft
    Aeroquip FCC0606 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 6 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Auto Meter 2000 Gauge Kit, Prestige Series, Antique Ivory Face
    Auto Meter 2000 Gauge Kit, Prestige Series, Antique Ivory Face
    x
                

    Auto Meter proudly continues their tradition of innovation tempered by reverence for the elegant designs of the past with the introduction of the Prestige Series instrument lines. Timeless dialfaces adorned with spun aluminum and vintage inspired pointer designs seamlessly coalesce with Auto Meter’s Hybrid Dial Technology, Hi-Def LED illumination, and thoroughbred performance movements to form the ultimate execution of traditional style and leading technology.

    Finished with high polish chrome bezels and vintage curved glass lenses, Prestige Antique Ivory gauges feature a warm, fullface radiance. Includes 2-1/16” electric fuel level, water temp, oil press, and battery voltage measurements, with full sweep mechanical options available for both water and oil gauges. No matter which style you choose, the Prestige Series lets everyone know you have arrived.

Goto Previous PagePrevious Page
1 2