Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fuel filler neck kit" Page 1 of 1

New (0)

Garage Sale (0)

  • 4 Inch Fuel Filler Neck for Fuel Cells
    4 Inch Fuel Filler Neck for Fuel Cells
    x
                

    This 4" diameter gas filler neck kit can be used as a replacement unit or for your custom fuel cell. Kit includes a mounting ring, rubber gasket, and bolts. 

    Note: Cap not included, use cap 91076502.

  • Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    x
                

    Use this special aluminum spanner key for our fuel filler neck (617-9040).  They allow you to access your fuel with the ability to leave with a locked lid.

    • Aluminum replacement spanner key
    • For fuel filler neck/lid (6179040)
    • Access fuel from secured lid
  • T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    x
                

    This fabricated aluminum fuel cell is built for our 1923 T-bucket kits with a 20" pick-up box. Made from 5051 aluminum and tig welded for strength. Includes mounting tabs to make installation easy and it features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Measures 9-1/2" x 12-1/4" x 30-1/4". Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity. 

    This tank will NOT clear the deck lid when used in conjunction with a channeled Speedway body. It will work great with flat floor bodies. Use tank 715-752 if you have a channeled body. 

    • 30-1/4" long
    • 12-1/4" wide
    • 9-1/2" tall
    • 14 gallon
    • Built for our 1923 T-Bucket kits with a 20" pickup box
    • Should be used with the un-channeled bodies
    • Features a 240-33 ohm sending unit
    • Feature a flush mount fill neck/cap
    • Designed to be mounted to the left side, which leaves room for your battery
  • T-Bucket Aluminum Fuel Tank for Channeled Body
    T-Bucket Aluminum Fuel Tank for Channeled Body
    x
                

    This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a raised fill neck w/ cap, AN-6 fuel pickup, and a rollover vent. Designed to be mounted to the left side which leaves room for your battery. Has a 10.4 gallon capacity. 

    • Pre-cut hole for fuel level sender
    • Can use LH swing sender only
    • Rollover vent valve included
    • Includes non-vented cap
    • Fuel outlet (AN-6) is on the side of the tank
    • Fuel gauge sending unit is NOT included and will need to be purchased separately.

     

    This tank WILL clear the deck lid when used in conjunction with a channeled Speedway Body. 

    Note:  Fuel gauge sending unit is not included and will need to be purchased separately.

     

  • Replacement Twist-On Fuel Cell Cap
    Replacement Twist-On Fuel Cell Cap
    x
                Replacement fuel cell cap fits 4" necks like those on our Steel Can Fuel Cells, Polyethylene Fuel Cells, and on our 4" Filler Neck Kit 910-76505.
            
  • Hagan Street Rods 90 RQ 90   Curve Series LH Hinge Fuel Door, Door
    Hagan Street Rods 90 RQ 90 Curve Series LH Hinge Fuel Door, Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90104
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90OVQ 90   Curve Series LH Hinge Fuel Door, Oval
    Hagan Street Rods 90OVQ 90 Curve Series LH Hinge Fuel Door, Oval
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90103
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2" x 4-3/4" oval. It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90 SQ 90   Curve Series LH Hinge Fuel Door, Square
    Hagan Street Rods 90 SQ 90 Curve Series LH Hinge Fuel Door, Square
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90105

    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

     

  • Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" square
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     Fuel Door Curvature Template (PDF)

  • Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" round
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 4-3/4" x 3-1/2" oval
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
  • Hagan Street Rods 45 RF 45 Degree Flat Series LH Hinge Round Fuel Door
    Hagan Street Rods 45 RF 45 Degree Flat Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included.

    • Can be mounted in steel or fiberglass
    • Made of 18 gauge mild steel
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gauge mild steel
    • The spout is 2" O.D. and 3-3/4" long
    • Overall depth of unit is 3"
    • Shipping weight is 3.011 lbs.
  • Hagan Street Rods 45rq 45 Degree Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 45rq 45 Degree Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

    Fuel Door Curvature Template (PDF)

     

  • Hagan Street Rods 450 VCP 45 Degree Curve RH Hinge Oval Fuel Door
    Hagan Street Rods 450 VCP 45 Degree Curve RH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
  • Hagan Street Rods 45 SQP 45   Curve Series RH Hinge Square Fuel Door
    Hagan Street Rods 45 SQP 45 Curve Series RH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

     

  • Hagan 450VQP 45 Degree Slight Curve Series RH Hinge Oval Fuel Door
    Hagan 450VQP 45 Degree Slight Curve Series RH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

     

  • Hagan Street Rods 45 OVC 45 Deg. Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 45 OVC 45 Deg. Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 45 VQ 45 Degree Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 45 VQ 45 Degree Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

     

  • Hagan 45RQP 45 Degree Slight Curve Series RH Hinge Round Fuel Door
    Hagan 45RQP 45 Degree Slight Curve Series RH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

     

  • Hagan Street Rods 45 RC 45 Deg. Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 45 RC 45 Deg. Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 45 RCP 45 Degree Curve RH Hinge Round Fuel Door
    Hagan Street Rods 45 RCP 45 Degree Curve RH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 450 VFP 45 Deg. Flat Series RH Hinge Oval Fuel Door
    Hagan Street Rods 450 VFP 45 Deg. Flat Series RH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4 x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • The outer plate is 7-3/4" by 5-1/4".
    • The box behind plate measures 6" by 4-7/16" by 2-7/8" tall

     

  • Hagan Street Rods 45 SFP 45 Degree Flat RH Hinge Square Fuel Door
    Hagan Street Rods 45 SFP 45 Degree Flat RH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods fd45RFP 45 Degree Flat RH Hinge Round Fuel Door
    Hagan Street Rods fd45RFP 45 Degree Flat RH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 450 VF 45 Degree Flat Series LH Hinge Oval Fuel Door
    Hagan Street Rods 450 VF 45 Degree Flat Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included.

    • Can be mounted in steel or fiberglass
    • Made of 18 gauge mild steel
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4 x 3-1/2" oval
    • The top is made of 18 gauge mild steel
    • The spout is 2" O.D. and 3-3/4" long
    • Overall depth of unit is 3"
  • Hagan Street Rods 45 SF 45 Deg. Flat Series LH Hinge Square Fuel Door
    Hagan Street Rods 45 SF 45 Deg. Flat Series LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included.

    • Can be mounted in steel or fiberglass
    • Made of 18 gauge mild steel
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" O.D. and 3-3/4" long
    • Overall depth of unit is 3"
  • Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVF 90 Degree Flat Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVF 90 Degree Flat Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90SF 90 Degree Flat Series LH Hinge Square Fuel Door
    Hagan Street Rods 90SF 90 Degree Flat Series LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic