Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fuel filler neck aluminum" Page 1 of 1

  • 1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    x
                

    These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

    1-1/2 Inch Aluminum Remote Fuel Filler Neck Flange Assembly 

    • O.D. of flange is 5-1/16"
    • 6 mounting holes on a 4.36" bolt circle
    • Filler neck is 1-1/2" O.D.
    • Includes mount ring, bolts and gasket

    This flange bolts to your fuel cell to permit attachment of a 1-1/2" I.D. filler hose. Aluminum construction.

  • 1948-60 Ford Pickup Under Box Aluminum Fuel Tank
    1948-60 Ford Pickup Under Box Aluminum Fuel Tank
    x
                

    These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common 'non-side swing specific' sending unit provided with aftermarket gauge sets.  A 'non-side' swing specific 240 empty - 33 full ohm sending unit such as # 458-8240 or 275-235 can be utilized. 

    Measures 28-1/4" x 16-1/2" x 8". 

  • 2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    x
                

    These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

    2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly 

    This flange bolts to your fuel cell to permit attachment of a 2" I.D. filler hose.

    This fill tube comes off of the flange at a 90 degree angle. 

    • O.D. of the flange is 5-1/16"
    • 6 mounting holes on a 4.36" bolt circle includes mount ring, bolts, and gasket
    • Filler neck is 2" O.D.
    • Aluminum construction

     

  • Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
    Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
    x
                

    These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

    This tank features a fuel outlet that is 3" from the end opposite the filler neck.

  • 1955-59 Chevy Pickup Under Box Aluminum Fuel Tank
    1955-59 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 15 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    • 1/4" NPT 90° brass roll-over vent valve with 5/16" hose nipple
    • 1/4" female NPT pick-up
    • Pick-up tube treads into tank with 3/8" NPT threads
  • Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    x
                

    Use this special aluminum spanner key for our fuel filler neck (617-9040).  They allow you to access your fuel with the ability to leave with a locked lid.

    • Aluminum replacement spanner key
    • For fuel filler neck/lid (6179040)
    • Access fuel from secured lid
  • 45 Degree Fuel Filler Neck
    $49.99
    45 Degree Fuel Filler Neck
    x
                
    Gas Filler neck is made of heavy aluminum and works with 1-1/2 inch and 2 inch hoses. Includes all hardware, seals, and adaptor.
    • Heavy aluminum construction
    • Hardware and seal included
    • Works with 1-1/2" and 2" hose with included adaptor
  • T-Bucket Aluminum Fuel Tank for Channeled Body
    T-Bucket Aluminum Fuel Tank for Channeled Body
    x
                

    This fabricated aluminum fuel tank is built for our 1923 T-bucket kits with a 20" pick-up box. It features a raised fill neck w/ cap, AN-6 fuel pickup, and a rollover vent. Designed to be mounted to the left side which leaves room for your battery. Has a 10.4 gallon capacity. 

    • Pre-cut hole for fuel level sender
    • Can use LH swing sender only
    • Rollover vent valve included
    • Includes non-vented cap
    • Fuel outlet (AN-6) is on the side of the tank
    • Fuel gauge sending unit is NOT included and will need to be purchased separately.

     

    This tank WILL clear the deck lid when used in conjunction with a channeled Speedway Body. 

    Note:  Fuel gauge sending unit is not included and will need to be purchased separately.

     

  • Weld-On Aluminum Fill Cap and Neck
    Weld-On Aluminum Fill Cap and Neck
    x
                

    Knurled aluminum cap and threaded aluminum neck. Requires welding. O-ring seal inside cap for positive seal on non-vented applications.

    • Has a 2.482 O.D. step at bottom
    • 1.25" overall height
    • ID of the neck is 2-1/8"
  • T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    x
                

    This fabricated aluminum fuel cell is built for our 1923 T-bucket kits with a 20" pick-up box. Made from 5051 aluminum and tig welded for strength. Includes mounting tabs to make installation easy and it features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Measures 9-1/2" x 12-1/4" x 30-1/4". Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity. 

    This tank will NOT clear the deck lid when used in conjunction with a channeled Speedway body. It will work great with flat floor bodies. Use tank 715-752 if you have a channeled body. 

    • 30-1/4" long
    • 12-1/4" wide
    • 9-1/2" tall
    • 14 gallon
    • Built for our 1923 T-Bucket kits with a 20" pickup box
    • Should be used with the un-channeled bodies
    • Features a 240-33 ohm sending unit
    • Feature a flush mount fill neck/cap
    • Designed to be mounted to the left side, which leaves room for your battery
  • Filler Twist Cap with Aluminum Neck
    Filler Twist Cap with Aluminum Neck
    x
                These filler necks come with a vented cap which vents to the underside  of the cap. Weld-in 2.3" O.D. bung. Bung is aluminum.
            
  • 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    Measures 38" x 12" x 8-1/2".  The actual tank is 38" wide, the mounting tabs are 3" on each side of the tank.  The total width of this tank is 44" with the mounting tabs.

    • 1/4" female NPT for vent hose / fitting
    • Male AN# 6 fitting affixed to a pick-up tube threaded into tank with 3/8" NPT threads
  • EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    x
                

    These fuel tank caps are designed for use with EMPI's stainless gas tanks but will work great with nearly any style filler neck.  They feature billet aluminum construction and add a perfect shine to top off your fuel tank.

    • For EMPI stainless steel fuel tanks
    • Rigid edge design for a sure grip
    • Billet aluminum
    • Sold each
  • Universal Aluminum Fuel Tank
    $399.99
    Product Rating: 4.50 Stars
    Universal Aluminum Fuel Tank
    x
                This 16 gallon tank was designed to be bolted to the floor of a pick-up box, but we're sure you can figure out other applications. It measures 28" long, 10" deep and 16" tall. It accepts the common 240 ohm full - 33 ohm empty sending unit and the filler neck measures 1-1/2". Ports on this tank are 3/8" NPT for the pickup and 1/4" NPT for the vent.
            
  • AFCO 80154BK Billet Radiator Filler Neck
    AFCO 80154BK Billet Radiator Filler Neck
    x
                AFCO's billet aluminum radiator filler necks offer improved strength and appearance over stamped versions comes. Comes with a 1/8" aluminum hose nipple. 
            
  • EMPI 3897 Polished Stainless Steel Fuel Tank, 10 x 30 Inch, End Fill, 9.5 Gallon
    EMPI 3897 Polished Stainless Steel Fuel Tank, 10 x 30 Inch, End Fill, 9.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 30"
    • End location filler neck
    • 9-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3896 Polished Stainless Steel Fuel Tank, 10 x 24 Inch, End Fill, 7.5 Gallon
    EMPI 3896 Polished Stainless Steel Fuel Tank, 10 x 24 Inch, End Fill, 7.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 24"
    • End location filler neck
    • 7-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

     

  • EMPI 3899 Polished Stainless Steel Fuel Tank, 10 x 40 Inch, End Fill, 13.5 Gallon
    EMPI 3899 Polished Stainless Steel Fuel Tank, 10 x 40 Inch, End Fill, 13.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 40"
    • End location filler neck
    • 13-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3898 Polished Stainless Steel Fuel Tank, 10 x 33 Inch, End Fill, 10.5 Gallon
    EMPI 3898 Polished Stainless Steel Fuel Tank, 10 x 33 Inch, End Fill, 10.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 33"
    • 1/4" NPT
    • End location filler neck
    • 10-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • AFCO 80155 Inline Filler Neck 1.5 OD Hose
    AFCO 80155 Inline Filler Neck 1.5 OD Hose
    x
                This inline filler neck installs into 1-1/2" O.D. upper radiator hoses. 100% aluminum construction. Includes a 1/8" straight aluminum overflow hose barb.
            
  • EMPI 3895 Polished Stainless Steel Fuel Tank, 10 x 16 Inch, Center Fill, 5 Gallon
    EMPI 3895 Polished Stainless Steel Fuel Tank, 10 x 16 Inch, Center Fill, 5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 16"
    • Center location filler neck
    • 5 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
    Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
    x
                

    These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

  • Aluminum Neck with Flange and Cap
    Aluminum Neck with Flange and Cap
    x
                  Weld-in 2.3" O.D. bung. This aluminum filler neck bung includes a flange. Features vented cap which vents to the  underside of the cap.            
            
  • JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell Valve
    JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell Valve
    x
                

    Cast aluminum fill valve mounts on fuel cell. Has spring loaded flapper valve. Mounts with twelve bolts on a 5" circle. 6-1/2" outside diameter. 2-1/2" hose end.

    Requires split nut ring 458-358 to install.

  • Walker C-487-2 Cobra 1930-1931 Ford Model A Radiator for Chevy Engine
    Walker C-487-2 Cobra 1930-1931 Ford Model A Radiator for Chevy Engine
    x
                Please view the product's page for more information
            
  • Walker B-Z-Ac487-2 Z-Series 30-31 Model A Radiator/Condser Ford Engine
    Walker B-Z-Ac487-2 Z-Series 30-31 Model A Radiator/Condser Ford Engine
    x
                Please view the product's page for more information
            
  • Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your v

  • Walker B-Z-4811 Z-Series 1917-1923 Ford Engine Model T Radiator
    Walker B-Z-4811 Z-Series 1917-1923 Ford Engine Model T Radiator
    x
                Please view the product's page for more information
            
  • Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    S/B Ford engines can take advantage of less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by

  • Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    x
                Please view the product's page for more information
            
  • Walker BC-Ac487-1 Cobra 1928-29 Model A Radiator/Condenser Ford Engine
    Walker BC-Ac487-1 Cobra 1928-29 Model A Radiator/Condenser Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Garage Sale - 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    Garage Sale
    Garage Sale - 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    Measures 38" x 12" x 8-1/2".  The actual tank is 38" wide, the mounting tabs are 3" on each side of the tank.  The total width of this tank is 44" with the mounting tabs.

    • 1/4" NPT 90° brass roll-over vent valve with 5/16" hose nipple
    • 1/4" female NPT pick-up
    • Pick-up tube treads into tank with 3/8" NPT threads
     
    This is garage sale priced because it has some damage from shipping.
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - Walker Cobra 1930-31 Ford Model A Radiator For Ford Engine
    Garage Sale
    Garage Sale - Walker Cobra 1930-31 Ford Model A Radiator For Ford Engine
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Lightweight Single Row Radiator, 1 Inch Core
    Garage Sale
    Garage Sale - AFCO Lightweight Single Row Radiator, 1 Inch Core
    x
                

    This AFCO Lightweight Single Row radiator is almost half the weight of a standard radiator and is designed to be used with an alky fueled or cool weather car. It measures 27-1/2" overall including tanks and is 19" tall. Has one 1.25" core. Chevy position outlets.

    AFCO Radiator Installation Instructions (PDF) 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

     

     This radiator is garage sale priced because the filler neck is welded on the outside.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS