Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fuel cell mounting" Page 1 of 2

  • Polyethylene Fuel Cell Mounting Straps, 16 Gallon
    Polyethylene Fuel Cell Mounting Straps, 16 Gallon
    x
                

    Zinc-plated steel mounting straps available for 16 gallon seamless polyethylene fuel cells (non-steel can cell design).

    NOTE: These straps do not work with steel can fuel cells.

    Must be used with cell #s 458-116 or 458-0458 only

  • 1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    x
                

    These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

    1-1/2 Inch Aluminum Remote Fuel Filler Neck Flange Assembly 

    • O.D. of flange is 5-1/16"
    • 6 mounting holes on a 4.36" bolt circle
    • Filler neck is 1-1/2" O.D.
    • Includes mount ring, bolts and gasket

    This flange bolts to your fuel cell to permit attachment of a 1-1/2" I.D. filler hose. Aluminum construction.

  • Polyethylene Fuel Cell Mounting Straps, 8 Gallon
    Polyethylene Fuel Cell Mounting Straps, 8 Gallon
    x
                

    Zinc-plated steel mounting straps available for 8 gallon seamless polyethylene fuel cells (non-steel can cell design).

    NOTE: These straps do not work with steel can fuel cells.

  • 2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    x
                

    These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

    2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly 

    This flange bolts to your fuel cell to permit attachment of a 2" I.D. filler hose.

    This fill tube comes off of the flange at a 90 degree angle. 

    • O.D. of the flange is 5-1/16"
    • 6 mounting holes on a 4.36" bolt circle includes mount ring, bolts, and gasket
    • Filler neck is 2" O.D.
    • Aluminum construction

     

  • Fuel Cell Tab, ATL Lower Tab, 3/8 Inch Hole
    Fuel Cell Tab, ATL Lower Tab, 3/8 Inch Hole
    x
                Alter mounting location or update for a different fuel cell brand or size. Also used for repair on broken or bent tabs.
            
  • Polyethylene Fuel Cell Mounting Straps, 12 Gallon
    Polyethylene Fuel Cell Mounting Straps, 12 Gallon
    x
                

    Zinc-plated steel mounting straps available for 12 gallon seamless polyethylene fuel cells (non-steel can cell design).

    NOTE: These straps do not work with steel can fuel cells.

  • JAZ Products 250-008-NF Bottom Sump Fuel Cell, 8 Gallon
    JAZ Products 250-008-NF Bottom Sump Fuel Cell, 8 Gallon
    x
                This bottom sump fuel cell is perfect for all race applications.  8 gallon capacity.  Flush mounted aerospace type filler neck.  Internal 2" sump with two AN 8 pick-up fittings.  An auxiliary AN 6 vent or return line is on the top.  Measures 20" long, 15" wide and 7-1/2" deep.

    Tech Tip: Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.

  • Peterson Fluid Systems 09-0910 Panel Mount Fuel Shut Off Valve, AN6
    Peterson Fluid Systems 09-0910 Panel Mount Fuel Shut Off Valve, AN6
    x
                Panel mount is AN6 male with offset style handle. Fuel cell ball valve mounts in plate, has an extra long bulkhead shaft. Required for many Sprint cars. Will work on our steering mount 546-200. 
            
  • JAZ Products 300-000-20 Fender Mount Fuel Filler Kit
    JAZ Products 300-000-20 Fender Mount Fuel Filler Kit
    x
                

    For remote filling of fuel cell. Kit contains a 12-bolt recessed fender fill assembly with vented cap (1/2 turn, twist & lock style). Fender filler flange measures 6-1/4" outside diameter.

    Cap and base are made of galvanized steel. Fill and vent hose are clear polyethylene. Use with fast fill valve.

  • Channeled Fuel Cell Mounting Bracket
    Channeled Fuel Cell Mounting Bracket
    x
                
    • Overall Length: 4.75 "
    • Overall Width: 1.55 "
    • Material Thickness: .08 "
    • Material Type: Steel
  • Fuel Safe ED117 17 Gallon Dirt Modified Fuel Cell
    New
    Fuel Safe ED117 17 Gallon Dirt Modified Fuel Cell
    x
                Fuel Safe is excited to announce the availability of a new racing cell  designed specifically for the Dirt Modified Racer.  The 17 Gallon  ED117DM shares many of the same features of the highly successful 28  Gallon Dirt Late Model Cell, such as the FIA-FT3 certified high strength Enduro®  molded bladder.  A lightweight aluminum  fill plate with a billet flush fill cap  provides superior roll over  protection and creates a low profile design  that allows racers to  adjust the location of the cell in the chassis for  peak performance.   The side mounted fuel outlet provides for improved  plumbing layout and  efficient fuel delivery.  The forward bias sump  design ensures the fuel  load is carried low and forward in the chassis  and that fuel is always  available under acceleration. 
     
    Key features:
    • 17 gallon high strength molded bladder – FIA / SFI compliant
    • 20 gauge powder coated steel container
    • SF6X10 fill plate:
    • -8 AN vent / return
    • Threaded 2.5” fill cap
    • Dipstick
    • -10 AN fuel outlet, side mounted for easy access
    • Lightweight, rigid fuel pickup
    • Compatible with all types of race gas including alcohol fuels
  • Bolt-In Fuel Cell Brackets
    $119.99
    Product Rating: 3.50 Stars
    Bolt-In Fuel Cell Brackets
    x
                
    • Allows easy installation of fuel cell in many types of cars
    • Completely bolt together
    • Some drilling of bolt holes required for fitment purposes
    • 1” square tube design provides secure mounting
    • Plain finish
    • Fits 16 gallon cells
    • 25” long x 19” wide x 11” tall
  • Fuel Safe 28 Gallon Dirt Late Model / Dirt Modified Racing Fuel Cell, ED128DLM
    New
    Fuel Safe 28 Gallon Dirt Late Model / Dirt Modified Racing Fuel Cell, ED128DLM
    x
                Fuel Safe’s dirt late model / dirt modified fuel cell is  engineered to win! It provides racers with the ultimate combination  of safety, performance, and affordability.  The 28 gallon cell features FIA-FT3 certified high strength Enduro®  molded bladder, housed in a 20 gauge steel container with a black powder  coated finish that conforms to all major sanctioning body’s rules book.   A lightweight aluminum fill plate with a billet flush fill cap  provides superior roll over protection and creates a low profile design  that allows racers to adjust the location of the cell in the chassis for  peak performance.  The side mounted fuel outlet provides for improved  plumbing layout and efficient fuel delivery.  The forward bias sump  design ensures the fuel load is carried low and forward in the chassis  and that fuel is always available under acceleration. 
    • Super tough FIA-FT3 certified Enduro® bladder
    • Powder coated (black) 20 gauge steel container
    • Low profile light-weight aluminum fill plate with:
    • Billet aluminum flush cap
    • -6 AN rollover vent valve
    • -8 AN fuel return
    • Dipstick
    • -10 AN pickup with side outlet
    • 2 year limited warranty
  • Fuel Cell Fuel Level Sending Unit, 240-33 Ohm, 8-1/2 Inch
    Fuel Cell Fuel Level Sending Unit, 240-33 Ohm, 8-1/2 Inch
    x
                

    These bolt-in fuel level sending units feature a positive seal and a 2.3" O.D. bung. For Stewart Warner and Auto Meter style gauges with 240-33 ohm range.

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    x
                

    This fabricated aluminum fuel cell is built for our 1923 T-bucket kits with a 20" pick-up box. Made from 5051 aluminum and tig welded for strength. Includes mounting tabs to make installation easy and it features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Measures 9-1/2" x 12-1/4" x 30-1/4". Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity. 

    This tank will NOT clear the deck lid when used in conjunction with a channeled Speedway body. It will work great with flat floor bodies. Use tank 715-752 if you have a channeled body. 

    • 30-1/4" long
    • 12-1/4" wide
    • 9-1/2" tall
    • 14 gallon
    • Built for our 1923 T-Bucket kits with a 20" pickup box
    • Should be used with the un-channeled bodies
    • Features a 240-33 ohm sending unit
    • Feature a flush mount fill neck/cap
    • Designed to be mounted to the left side, which leaves room for your battery
  • JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell Valve
    JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell Valve
    x
                

    Cast aluminum fill valve mounts on fuel cell. Has spring loaded flapper valve. Mounts with twelve bolts on a 5" circle. 6-1/2" outside diameter. 2-1/2" hose end.

    Requires split nut ring 458-358 to install.

  • Fuel Cell Tab, Varied Alignment
    Fuel Cell Tab, Varied Alignment
    x
                Alter mounting location or update for a different fuel cell brand or size. Also used for repair on broken or bent tabs.
            
  • Fuel Cell Tab, 2-Sided, 3/8 Inch Hole
    Fuel Cell Tab, 2-Sided, 3/8 Inch Hole
    x
                Alter mounting location or update for a different fuel cell brand or size. Also used for repair on broken or bent tabs.
            
  • JAZ Products 275-632-06 32 Gallon Teardrop Fuel Cell
    JAZ Products 275-632-06 32 Gallon Teardrop Fuel Cell
    x
                This fuel cell is design to fit chassis that use the common teardrop design. The red powder coated steel can has an AN10 pickup, AN8 vent/tip-over valve and AN8 return fitting. It is 24-3/4" eide and has a steel fill cap and IMCA approved flapper valve. Mounting straps sold separately.
            
  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Aeromotive 18665 Stealth Fuel Cell, 20 Gallon
    Aeromotive 18665 Stealth Fuel Cell, 20 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Aeromotive 18661 A1000 Fuel Cell, 20 Gallon
    Aeromotive 18661 A1000 Fuel Cell, 20 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes an A1000 fuel pump w/ 100 micron stainless fuel filter (filter pre-installed into p/u tube)
    • Supports up to 1700HP
    • Works with both carbureted and EFI systems
    • Return line provisions
    • AN8 valve/vents and return port
    • AN10 pump outlet
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish

    910-18661 Instructions (PDF)

  • Aeromotive 18660 A1000 Fuel Cell, 15 Gallon
    Aeromotive 18660 A1000 Fuel Cell, 15 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes an A1000 fuel pump w/ 100 micron stainless fuel filter
    • Supports up to 1700HP
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish

    910-18660 Instructions (PDF)

  • 4 Inch Fuel Filler Neck for Fuel Cells
    4 Inch Fuel Filler Neck for Fuel Cells
    x
                

    This 4" diameter gas filler neck kit can be used as a replacement unit or for your custom fuel cell. Kit includes a mounting ring, rubber gasket, and bolts. 

    Note: Cap not included, use cap 91076502.

  • Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    x
                Dash mount is AN6 male with offset style handle. Fuel cell ball valve   mounts in plate. Required for many  Sprint cars. They are designed to be  plumbed inline and mount close to the driver.
    • Engineered specifically for sprint car applications
    • -6 AN male to male fuel shut off valve
    • Designed to be plumbed inline and mount close to the driver
  • Waterman 935566B Bulkhead Mount Fuel Shut Off Valve, -6 AN
    Waterman 935566B Bulkhead Mount Fuel Shut Off Valve, -6 AN
    x
                Panel mount is AN6 male with offset style handle. Fuel cell ball valve  mounts in plate. Required for many  Sprint cars. They are designed to be plumbed inline and mount close to the driver.
    • Engineered specifically for sprint car applications
    • AN -6 male to male fuel shut off valve
    • Designed to be plumbed inline and mount close to the driver
  • Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
    Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
    x
                These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
    • 340 Stealth Fuel Pump
    • Supports up to:
      • 700 HP EFI Supercharged
      • 1000 HP Carbureted Supercharged
    • Black anodized hanger assembly
    • (3) ORB-06 Ports – Supply, Return, Vent
    • Fuel resistant baffle / basket (Includes: Foam and Bladder)
    • Universal high flow pre-pump filter
    • Modular design can be cut to height to fit almost any fuel tank
    • EFI or Carbureted
    • Turbine pump mechanism increases durability.
    • Must be used with a return style system
    • In-tank use only

    Fuel Injected Systems Specs and Recommendations Chart (Link)

    Carbureted Systems Specs and Recommendations Chart (Link)

  • Saldana Racing OLMT-19 Gallon Outlaw Mini Sprint Car Fuel Tank Shell
    Saldana Racing OLMT-19 Gallon Outlaw Mini Sprint Car Fuel Tank Shell
    x
                Designed for short tracks, the SBI “Fuel Forward” baffle system helps keep your fuel     load  forward in the tank as the fuel level decreases. The anti-slosh and fuel containment     characteristics make your car handle more consistently as you burn fuel. This special     baffle concept lets you pick up almost every drop of fuel. This fuel  tank has a top AN12 pickup. All tanks have molded in mounts to fit most  current mini sprints. 

    Please note that these are shells only and do not include the bladder, plate, cap, or vent.

    Saldana Racing Outlaw Style Sprint Car Fuel Tank Shell 

    • Includes molded inserts for easy mounting
    • Works for midgets and 1200 cc mini-sprints
    • Bladders (alcohol or gas) sold separately
    • 19 Gallon
  • 19 Gallon Outlaw Tank Assembly
    $1,264.99
    19 Gallon Outlaw Tank Assembly
    x
                
    • Includes molded inserts for easy mounting
    • Perfect for midgets and 1200 mini sprints
    • Same chassis bracket configuration for all sizes
  • Saldana Micro Sprint Hyper 8 Outlaw Fuel Tank, 8 Gallon
    Saldana Micro Sprint Hyper 8 Outlaw Fuel Tank, 8 Gallon
    x
                These Micro Sprint racing fuel tanks are designed for use with Alcohol only.  They come with the bladder and baffle and feature an access plate to remove the bladder if necessary. These tanks can easily be mounted with 4 threaded inserts molded into the sides. Fits various Micro Sprint chassis.
    • For use with Alcohol only
    • This tail tank includes the bladder with baffle
    • Baffled bladder makes for less fuel slosh
    • -6 AN Bulkhead outlet on the front
    • Saldana access plate, located on the bottom of the front part of the tank, lets you get to the bladder if necessary
    • Has 4 threaded inserts molded into the sides of the tank for easy mounting
    • Weighs approximately 28 lbs
    • Used in numerous Micro-Sprints, including Triple X, Factor 1, Sawyer, Stallard, PMP, Concept, Bailey, Pace, and almost all other Micro Chassis.
  • Fuel Safe MT116-I Midget 16 Gal. Sprint Fuel Shell, -10 AN Top/Insert
    Fuel Safe MT116-I Midget 16 Gal. Sprint Fuel Shell, -10 AN Top/Insert
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Fuel Safe ST130 Sprint Dominator 30 Gallon Replacement Fuel Tank Shell
    Fuel Safe ST130 Sprint Dominator 30 Gallon Replacement Fuel Tank Shell
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Jet-Speedway IMCA Modified Fuel System
    Jet-Speedway IMCA Modified Fuel System
    x
                              Jet/Speedway Fuel System (IMCA)

    Kit includes:
    • Steel 22 Gallon Fuel Cell
    • Univer Filter Mount Bracket
    • Paper Fuel Filter Element
    • Long Filter Housing w/ Hardware
    • Inlet Long & Short/Outlet Long AN8 Fitting
    • Blue AN8 Aeroquip Hose
    • Straight Brass Push-on Fitting, AN8
    • 90° Push-on Hose End, AN8

  • Fuel Safe SB228DT Complete Sprint Car Tank Kit, 28 Gallon, -12 AN Top
    Fuel Safe SB228DT Complete Sprint Car Tank Kit, 28 Gallon, -12 AN Top
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Fuel Safe ST128 Sprint Car Replacement Fuel Shell Only, 28 Gallon
    Fuel Safe ST128 Sprint Car Replacement Fuel Shell Only, 28 Gallon
    x
                All Fuel Safe replacement tank shells have the  molded-in mounts for all current Sprint cars. Please note that these are shells only and do not include the bladder, plate, cap, or vent.
            
  • Fuel Safe ST133 Sprint Car Replacement Fuel Shell Only, 33 Gallon
    Fuel Safe ST133 Sprint Car Replacement Fuel Shell Only, 33 Gallon
    x
                All Fuel Safe replacement tank shells have the  molded-in mounts for all current Sprint cars. Please note that these are shells only and do not include the bladder, plate, cap, or vent.
            
  • Fuel Safe ST125 -12 TOP Sprint Car 25 Gal. Replacement Fuel Shell Only
    Fuel Safe ST125 -12 TOP Sprint Car 25 Gal. Replacement Fuel Shell Only
    x
                All Fuel Safe replacement tank shells have the  molded-in mounts for all current Sprint cars. Please note that these are shells only and do not include the bladder, plate, cap, or vent.
            
  • Garage Sale - 32 Gallon Fuel Cell
    $149.99
    $189.99
    Garage Sale
    Garage Sale - 32 Gallon Fuel Cell
    x
                

    32 Gallon L-side mount fuel cell.

     

    This one is garage sale priced because we usually don't carry this model. Includes fuel cell only, no cap or fittings included. What you see is what you get.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Fuel Safe 28 Gallon Dirt Late Model/Dirt Modified Racing Fuel Cell, EDS128DLM
    Garage Sale
    Garage Sale - Fuel Safe 28 Gallon Dirt Late Model/Dirt Modified Racing Fuel Cell, EDS128DLM
    x
                Please view the product's page for more information
            
  • Garage Sale - Speedway Large Cobra Style Gas Cap
    Garage Sale
    Garage Sale - Speedway Large Cobra Style Gas Cap
    x
                

    This gas cap is garage sale priced because it has scratches and scuffs from the hardware being loose in the box. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

    • Fully polished aluminum construction
    • Large Cobra Gas Cap is vented
    • Flip top style cap with roller latch
    • Cap measures 4-5/8" diameter
    • Mounting base measures 5-1/8" diameter
    • Hose fitting measures 2" diameter
Goto Previous PagePrevious Page
1 2