Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"front left brake caliper" Page 1 of 2

  • AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • M&W BCB-325-2 Black Alum Left Front Brake Caliper Mount-10.88 In Rotor
    M&W BCB-325-2 Black Alum Left Front Brake Caliper Mount-10.88 In Rotor
    x
                These disc brake caliper brackets for left front calipers are made from  high quality aluminum.  They feature an anodized black finish and  include all necessary hardware. They are intended for 10.88" (10-7/8") diameter  rotors.
    • Sprint car
    • Black Left front brake caliper mount
    • 3.25" long
    • For 10.88" (10-7/8") rotor
  • M&W Aluminum Left Front Brake Caliper Mount for 10.2 Inch Rotor, Black
    M&W Aluminum Left Front Brake Caliper Mount for 10.2 Inch Rotor, Black
    x
                These disc brake caliper brackets for left front calipers are made from high quality aluminum.  They feature an anodized black finish and include all necessary hardware. They are intended for 10.2" (10-1/8") diameter rotors.
    • Sprint car
    • Black Left front brake caliper mount
    • 3.25" long
    • For 10.2" (10-1/8") rotor
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    New
    Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    x
                

    The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force.  Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware.

    • Nickle plated dynalite single caliper
    • 10.2" drilled aluminum front rotor
    • Complete with brake pads, brackets, and bolts
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material: Aluminum
      • Diameter:  10.20"
      • Width:  .310"
      • Vane Count: Solid
      • Design Type:  Aluminum
  • Wilwood 140-12956 Sprint Racing Aluminum Left Front Brake Kit
    New
    Wilwood 140-12956 Sprint Racing Aluminum Left Front Brake Kit
    x
                The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Kits are offered with either Scalloped Alloy Steel Rotors for high heat or Aluminum rotors for maximizing weight saving on light braking tracks. Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware. 
    • Dynapro single caliper Nickel plated
    • 10.95" aluminum drilled rotor
    • Includes bracket, bolts, and pads
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material:  Aluminum
      • Diameter:  10.95"
      • Width:  .310"
      • Vane Count:  Solid
      • Design Type:  Aluminum
  • Wilwood 140-12957 Sprint Racing Steel Left Front Brake Kit
    New
    Wilwood 140-12957 Sprint Racing Steel Left Front Brake Kit
    x
                The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Kits are offered with either Scalloped Alloy Steel Rotors for high heat or Aluminum rotors for maximizing weight saving on light braking tracks. Kit come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware. 
    • Dynapro single caliper Nickel plated
    • 11" scalloped steel drilled rotor
    • Includes bracket, bolts, and pads
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix B
    • Rotor:
      • Type:  Steel
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material:  Steel
      • Diameter:  11"
      • Width:  .310"
      • Vane Count:  Solid
      • Design Type: Steel Scalloped
  • Ultra-Lite Sprint Car Left Front Brake Kit, Titanium Rotor, Round
    Ultra-Lite Sprint Car Left Front Brake Kit, Titanium Rotor, Round
    x
                Left front 10" titanium rotor with left front single piston caliper. Left front brake bracket 3-1/4" mount, 3 rotor mount bolts, 2 pads. 

    Tech Tip: Take the right rear brake off and put it on the left rear. It works like a tie down shock.

    All Ultra Lite brake rotors are ceramic coated and must be beded in correctly. Only use full metallic brake pads!

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Wilwood 150-4091 Micro Sprint Left Front Caliper Pad
    Wilwood 150-4091 Micro Sprint Left Front Caliper Pad
    x
                

    Micro Sprint Left Front Caliper Pad

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Ultra Lite Midget Left Front Brake Kit, Scalloped Rotor
    Ultra Lite Midget Left Front Brake Kit, Scalloped Rotor
    x
                Left front brake kit has a 10" titanium rotor, left front single piston caliper, left front brake bracket with a 3" mount, 3 rotor mount bolts, and 2 pads.  Rotor available in round or scalloped.
            
  • JOES Racing Products 25630 Left Front Micro Sprint Brake Bracket
    JOES Racing Products 25630 Left Front Micro Sprint Brake Bracket
    x
                These brake brackets are designed for left front micro sprint 2003 to 2008 style spindles.  They are powder coated in a durable black finish.
    • Fits '03 to '08 style spindles
    • Bracket bolts on with superior fit
    • Powder coated black for a durable finish that looks great
  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Ultra-Lite Sprint Car Left Front Brake Kit, Titanium Rotor, Scalloped
    Ultra-Lite Sprint Car Left Front Brake Kit, Titanium Rotor, Scalloped
    x
                Left front 10" titanium rotor with left front single piston caliper. Left front brake bracket 3-1/4" mount, 3 rotor mount bolts, 2 pads. 

    Tech Tip: Take the right rear brake off and put it on the left rear. It works like a tie down shock.

    All Ultra Lite brake rotors are ceramic coated and must be beded in correctly. Only use full metallic brake pads!

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Ultra Lite Midget Left Front Brake Kit, Round Rotor
    Ultra Lite Midget Left Front Brake Kit, Round Rotor
    x
                Left front brake kit has a 10" titanium rotor, left front single piston caliper, left front brake bracket with a 3" mount, 3 rotor mount bolts, and 2 pads.
            
  • Big Bore GM Metric 1978-88 Brake Caliper
    Big Bore GM Metric 1978-88 Brake Caliper
    x
                

    If you are using 1978-88 GM Metric style brake calipers your choices of piston sizes are pretty much limited to 2-1/2". This isn't bad unless you want to 'tune' your braking by using different size calipers front to rear. By using a larger 2-3/4" piston you will increase the braking force at a wheel over a wheel using a smaller piston.

    Bleeder and inlet are both 10mm-1.5 inlet allowing the caliper to be used on either side. Plus, these calipers have been ground smooth to make them easier to paint.

    Includes pads and hardware. Sold as EACH.

    • 20% increase in stopping power over stock calipers
    • Can used on the left and right sides
    • Extra ribs have been added internally while unnecessary weight was removed
    • Lighter, stronger, has more stopping power than OEM calipers
    • Each caliper includes:
      • brake pads
      • clips
      • slide pins
      • banjo bolt
      • washers
      • bleeder screw
  • M&W MBCB-3 Left Front Caliper Bracket
    M&W MBCB-3 Left Front Caliper Bracket
    x
                For 3.25" spindle and 3.25" calipers. Fits 10" rotor. 
            
  • Sprint Left Front Brake Kit with Speedway Brake Rotor
    Sprint Left Front Brake Kit with Speedway Brake Rotor
    x
                We put together this left front brake kit for the racer looking for the best quality while keeping cost down. Included is a Wilwood Dynalite caliper with 3.25" mounts, 2 brake pads, a 10.875" aluminum Speedway brake rotor and mounting bolts. 

    Components also available separately.

  • Speedway Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    Speedway Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                Use with Pinto spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper. Available for left or right side. 
            
  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Sprint Left Front Brake Kit with Wilwood Rotor
    Sprint Left Front Brake Kit with Wilwood Rotor
    x
                We put together this left front brake kit for the racer looking for the best quality while keeping cost down. Included is a Wilwood Dynalite caliper with 3.25" mounts, 2 brake pads, a 10.2" Wilwood rotor and rotor mounting bolts. 

    Components also available separately.

  • Wilwood 140-11773 Stainless Left Front Rotor Kit
    Wilwood 140-11773 Stainless Left Front Rotor Kit
    x
                

    Wilwood’s GP320 Sprint Left Front Brake kit offers increased braking torque and thermal performance of the GP320 4 piston calipers. A definitive increase in braking and durability over traditional aluminum or steel rotor systems. Mounts are included for standard Sprint spindle to match the included 10.50 x 0.19” Super Alloy rotor. Also includes Composition Metallic brake pads, lightweight aluminum dynamic mount 3-pin rotor adapter and T-nut hardware kit.

    Instructions (PDF)

  • Wilwood 120-9689 Billet Dyna Pro Single Caliper, 3-3/4 Inch Mount
    Wilwood 120-9689 Billet Dyna Pro Single Caliper, 3-3/4 Inch Mount
    x
                

    The Dyna Pro Single (DPS) billet caliper is the newest generation of calipers available as an upgrade or replacement for applications previously using the Dynalite Single (DLS) series. DPS calipers combine superior strength with performance enhancements to make these the best "Dyna" series calipers ever.

    The DPS is loaded with exclusive Wilwood performance enhancements. The calipers feature Quick-E-Clip pad retainers that support a 6812 type brake pad from the top. In addition to past pad service without caliper removal, the feature provides substantially stronger retention over the single Quick-Clip pin and 7012 type pads used in the previous DLS models.

    • Quick-E-Clip pad retainers supports brake pad from top
    • Heavy wall stainless steel pistons
    • Stainless steel SRS bridge plates eliminate pad rattle and dampen vibration
    • Internal fluid passages
    • Four corner bleed screws allow mounting in any front, rear, left, or right side position

     

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Wilwood Sprint Right Rear Brake Kit
    Wilwood Sprint Right Rear Brake Kit
    x
                Please view the product's page for more information
            
  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Eagle Micro Sprint Left Front Brake Mount
    Eagle Micro Sprint Left Front Brake Mount
    x
                

    Eagle Motorsports factory-built component. This is a new style Left Front bracket that will fit most 2009-later sprint car style spindles.

    • Left front caliper bracket
    • Fits most 2009-later sprint car style spindles
  • Ultra Lite Brakes 930-0255 Sprint Left Front Caliper Mounting Bracket
    Ultra Lite Brakes 930-0255 Sprint Left Front Caliper Mounting Bracket
    x
                Ultra Lite floating caliper will fit 10" rotor and made for 3" spindle.
            
  • Ultra Lite Brakes 140-1006 Left Front Single Piston Caliper
    Ultra Lite Brakes 140-1006 Left Front Single Piston Caliper
    x
                

    Ultra-Lite 100 Series single piston caliper has a Teflon coated piston with titanium center pin. 1-5/8" piston.

    Use with pads 940-31017 for ceramic coated rotors.

  • Ultra Lite Brakes 930-0271 Midget Left Front Caliper Mounting Bracket
    Ultra Lite Brakes 930-0271 Midget Left Front Caliper Mounting Bracket
    x
                Floating bracket for 10" rotor and 3-1/4" spindle mount.
            
  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

  • Wilwood 120-11576 Forged Narrow Dynalite Caliper 1.38 In Pis 1.25 In
    Wilwood 120-11576 Forged Narrow Dynalite Caliper 1.38 In Pis 1.25 In
    x
                

    Wilwood's new Forged Narrow Mount Dynalite (FNDL) calipers are ideal for and widely used in many competition applications including late models,modifieds, sprints, off road and road racing. Computer generated design and stress analysis technology, is the latest innovation from Wilwood providing substantial improvements in strength and performance over all comparable caliper models.

    Forged Narrow Mount Dynalites are the strongest calipers in the class. FNDL calipers are a direct replacement for all previous Wilwood NDL’s and similar competitive brands with 3.50" centered mounting tabs. A total of five bolts provide superior bridge strength and positive retention of the top loaded 7816 or 7216 type brake pads. The full range of PolyMatrix pad compounds is available to match the brake response and heat range requirements of any competition application.

    • Strongest calipers in the class
    • 3.50" centered mounting tabs
    • Superior bridge strength and positive retention

    Wilwood FNDC Product Data Sheet (PDF)

Goto Previous PagePrevious Page
1 2