Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"front axle spindles" Page 1 of 11

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 4 Inch Drop
    Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 4 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '37-'48 Ford style spindles 
    • 4" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    916-39506 Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 6 Inch Drop
    Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 6 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '37-'48 Ford style spindles 
    • 6" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain
    Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain
    x
                Please view the product's page for more information
            
  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 6 Inch Drop
    Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 6 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '49-'54 Chevy car style spindles 
    • 6" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 4 Inch Drop
    Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 4 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '49-'54 Chevy car style spindles 
    • 4" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Speedway Forged 4 Inch Drop I-Beam Front Axle, Chrome
    Speedway Forged 4 Inch Drop I-Beam Front Axle, Chrome
    x
                Please view the product's page for more information
            
  • Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain, Drilled
    Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain, Drilled
    x
                Please view the product's page for more information
            
  • Speedway Forged 4 Inch Drop I-Beam Front Axle, Chrome, Drilled
    Speedway Forged 4 Inch Drop I-Beam Front Axle, Chrome, Drilled
    x
                Please view the product's page for more information
            
  • Spring-Behind 4 Inch Drop Tube Axle Front End for Ford Spindles, Plain
    Spring-Behind 4 Inch Drop Tube Axle Front End for Ford Spindles, Plain
    x
                

    For 1937-1948 early Ford passenger car spindles. Maximum car weight 2500 lbs.  Plain steel construction.

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF) 

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Total Performance Retro-Fit Front Axle Kit
    Total Performance Retro-Fit Front Axle Kit
    x
                

    If you still need a front axle assembly for your pre-2008 Total Performance T-Bucket, you had better read this. The Total Performance T-Bucket spindles were a hybrid that combined Econoline kingpins, early Chevy bracket mounting tabs and early Ford wheel bearing surfaces.  Unfortunately these spindles are no longer being manufactured. Speedway has a kit that includes the axle, leaf spring, shackles, radius rods, '49-'54 Chevy car style spindles with kingpins and hardware. This kit will get you away from the hybrid spindles and allows you to run any of our '49-'54 Chevy style brake kits. 

    Steering arms and tie rod assemblies sold separately. Currently available in plain steel only.

     

    Spindle Guide (Link)

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31953 Instructions (PDF)

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • IMCA Approved Pinto-Mustang II Spindles
    IMCA Approved Pinto-Mustang II Spindles
    x
                Brand NEW, heat-treated forged Mustang II steel spindle that retains the exact OEM geometry of the 74-78 Mustang II or 74-80 Pinto spindle. This is the ONLY aftermarket spindle allowed by IMCA. Work great with our 10" HD Hybrid Rotors as well as with stock rotors, bearings, calipers, ect. Stock 7 5/8" height.  Easy to install.
            
  • Ford Spindles - 4-Bar Spring-Behind Front End Kit, Chrome
    Ford Spindles - 4-Bar Spring-Behind Front End Kit, Chrome
    x
                Tube axle works with 1937-48 Ford passenger car spindles. Works great for T's and lightweight, fenderless vehicles (maximum car weight 2500 lbs.).

    Kit includes:

    • Two 1-3/4" spring shackles
    • Two spring pivots
    • 26" 4 leaf spring
    • Tube axle, 48" eye-to-eye, 4" drop
    • Four brackets welded to axle
    • Four radius rods
    • Four 4-bar ends
    • Four jam nuts
    • Panhard bar assembly
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Ford Spindles - 4-Bar Spring-Behind Front End Kit, Stainless
    Ford Spindles - 4-Bar Spring-Behind Front End Kit, Stainless
    x
                Tube axle works with 1937-48 Ford passenger car spindles. Works great for T's and lightweight, fenderless vehicles (maximum car weight 2500 lbs.).

    Kit includes:

    • Two 1-3/4" spring shackles
    • Two spring pivots
    • 26" 4 leaf spring
    • Tube axle, 48" eye-to-eye, 4" drop
    • Four brackets welded to axle
    • Four radius rods
    • Four 4-bar ends
    • Four jam nuts
    • Panhard bar assembly
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Ford Spindles - 4-Bar Spring-Behind Front End Kit, Plain
    Ford Spindles - 4-Bar Spring-Behind Front End Kit, Plain
    x
                Tube axle works with 1937-48 Ford passenger car spindles. Works great for T's and lightweight, fenderless vehicles (maximum car weight 2500 lbs.).

    Kit includes:

    • Two 1-3/4" spring shackles
    • Two spring pivots
    • 26" 4 leaf spring
    • Tube axle, 48" eye-to-eye, 4" drop
    • Four brackets welded to axle
    • Four radius rods
    • Four 4-bar ends
    • Four jam nuts
    • Panhard bar assembly
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Chevy Spindles - 4-Bar Spring-Behind Front End, Stainless
    Chevy Spindles - 4-Bar Spring-Behind Front End, Stainless
    x
                Tube axle works with 1949-1954 early Chevy passenger car spindles. Works great for T's and lightweight, fenderless vehicles (maximum car weight 2500 lbs.).

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4 leaf cross spring w/ nylon buttons
    • Tube axle, 48" eye-to-eye, 4" drop
    • Four brackets welded to axle
    • Four radius rods
    • Four 4-bar ends
    • Four jam nuts
    • Panhard bar assembly
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Chevy Spindles - 4-Bar Spring-Behind Front End, Chrome
    Chevy Spindles - 4-Bar Spring-Behind Front End, Chrome
    x
                Tube axle works with 1949-1954 early Chevy passenger car spindles. Works great for T's and lightweight, fenderless vehicles (maximum car weight 2500 lbs.).

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4 leaf cross spring w/ nylon buttons
    • Tube axle, 48" eye-to-eye, 4" drop
    • Four brackets welded to axle
    • Four radius rods
    • Four 4-bar ends
    • Four jam nuts
    • Panhard bar assembly
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Chevy Spindles - 4-Bar Spring-Behind Front End, Plain
    Chevy Spindles - 4-Bar Spring-Behind Front End, Plain
    x
                Tube axle works with 1949-1954 early Chevy passenger car spindles. Works great for T's and lightweight, fenderless vehicles (maximum car weight 2500 lbs.).

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4 leaf cross spring w/ nylon buttons
    • Tube axle, 48" eye-to-eye, 4" drop
    • Four brackets welded to axle
    • Four radius rods
    • Four 4-bar ends
    • Four jam nuts
    • Panhard bar assembly
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

    Note: On 916-39521, the spring and frame bracket are Chrome, not Stainless steel.

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 11