Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"front axle assembly" Page 1 of 6

  • Speedway Midget Axle Assembly for Stealth/TCR Chassis
    Speedway Midget Axle Assembly for Stealth/TCR Chassis
    x
                You get everything shown, but you do the assembly. Speedway's 44" 4130 front axle, steel king pins, aluminum spindles with seel snouts, aluminum steering arms, Winters direct mount hubs, LF brake bracket, LF aluminum brake rotor, rotor bolts, LF two piston caliper, brake pads, aluminum tie rod, aluminum heims, aluminum jam nuts, grade 8 bolt and nut kit. 
            
  • Lo-Boy Front Axle Assembly
    $649.99
    Lo-Boy Front Axle Assembly
    x
                

    This spring-behind front axle assembly is a direct bolt-in for our '32 Lo-Boy frame. Kit features a tube axle, classic 27" hairpin radius rods, and 31" standard eye multi-leaf spring. Spring mounts, lower shock mounts, and all hardware are included. For use with 1949-54 Chevy spindles.

    Parts in this kit are unfinished bare steel and must be painted or powdercoated.

  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Chrome Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Chrome Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • Total Performance Retro-Fit Front Axle Kit
    Total Performance Retro-Fit Front Axle Kit
    x
                

    If you still need a front axle assembly for your pre-2008 Total Performance T-Bucket, you had better read this. The Total Performance T-Bucket spindles were a hybrid that combined Econoline kingpins, early Chevy bracket mounting tabs and early Ford wheel bearing surfaces.  Unfortunately these spindles are no longer being manufactured. Speedway has a kit that includes the axle, leaf spring, shackles, radius rods, '49-'54 Chevy car style spindles with kingpins and hardware. This kit will get you away from the hybrid spindles and allows you to run any of our '49-'54 Chevy style brake kits. 

    Steering arms and tie rod assemblies sold separately. Currently available in plain steel only.

     

    Spindle Guide (Link)

  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • 1932 Ford Front End Assembly, I-Beam Axle, 4-Bar Kit, Plain
    1932 Ford Front End Assembly, I-Beam Axle, 4-Bar Kit, Plain
    x
                To make it easier for you the builder, we have four front axle assemblies that are designed for frame #91657050. Choose from plain or chrome and tube or I-beam axles. 

    These front end assemblies include a new tube or I-beam axle, new leaf spring and u-bolts, spring shackles, spring perches, lower shock mounts, 4-bars and ends and panhard bar assembly.

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Nostalgia 1923 T-Bucket Frame Kit
    From: $2,499.99
    Product Rating: 5.00 Stars
    Nostalgia 1923 T-Bucket Frame Kit
    x
                

    The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link) 

    This product requires a 3-4 week build time.

  • 1932 Ford Front End Assembly, Tube Axle, 4-Bar Kit, Plain
    1932 Ford Front End Assembly, Tube Axle, 4-Bar Kit, Plain
    x
                To make it easier for you the builder, we have four front axle assemblies that are designed for frame #91657050. Choose from plain or chrome and tube or I-beam axles. 

    These front end assemblies include a new tube or I-beam axle, new leaf spring and u-bolts, spring shackles, spring perches, lower shock mounts, 4-bars and ends and panhard bar assembly.

    Front Axle/Suspension Tech Tips (GIF) 

  • 1932 Ford Front End Assembly, Tube Axle, 4-Bar Kit, Chrome
    1932 Ford Front End Assembly, Tube Axle, 4-Bar Kit, Chrome
    x
                To make it easier for you the builder, we have four front axle assemblies that are designed for frame #91657050. Choose from plain or chrome and tube or I-beam axles. 

    These front end assemblies include a new tube or I-beam axle, new leaf spring and u-bolts, spring shackles, spring perches, lower shock mounts, 4-bars and ends and panhard bar assembly.

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

    Note: On 916-39521, the spring and frame bracket are Chrome, not Stainless steel.

     

  • Basic 1923 T-Bucket Frame Kit
    From: $1,999.99
    Basic 1923 T-Bucket Frame Kit
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

     

     

  • Deluxe 1923 T-Bucket Frame Kit
    From: $2,699.99
    Deluxe 1923 T-Bucket Frame Kit
    x
                

    The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.  

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • 1932 Ford Front End Assembly, I-Beam Axle, 4-Bar Kit, Chrome
    1932 Ford Front End Assembly, I-Beam Axle, 4-Bar Kit, Chrome
    x
                To make it easier for you the builder, we have four front axle assemblies that are designed for frame #91657050. Choose from plain or chrome and tube or I-beam axles. 

    These front end assemblies include a new tube or I-beam axle, new leaf spring and u-bolts, spring shackles, spring perches, lower shock mounts, 4-bars and ends and panhard bar assembly.

    Front Axle/Suspension Tech Tips (GIF) 

  • Garton Pedal Car Front Axle Assembly
    Garton Pedal Car Front Axle Assembly
    x
                

    Garton Front Axle Assembly

    Select the proper link below to view all parts for your Hot Rod, Tin Lizzie or Casey Jones pedal car.

    Please refer to application tab to double check pedal car parts fitment. 

    Parts shown in the exploded view but not listed are currently not available. Sorry!

    Exploded Parts View for Garton Hot Rod (Link)

    Exploded Parts View for Garton Tin Lizzy (Link)

    Exploded Parts View for Garton Casey Jones (Link)

  • Pedal Car Parts, BMC Racer Front Axle Assembly
    Pedal Car Parts, BMC Racer Front Axle Assembly
    x
                

    BMC Racer Front Axle Assembly

    Select the link below to view all parts for your pedal car.

    Please refer to application tab to double check part fitment. 

    Parts shown in the exploded view but not listed are currently not available. Sorry!

    Exploded Parts View for BMC Racer (Link)

  • Pedal Car Parts, AMF 508/519 Front Axle Brace, 4 Inch Long
    Pedal Car Parts, AMF 508/519 Front Axle Brace, 4 Inch Long
    x
                

    AMF 508/519 Front Axle Brace, 4 Inch Long

    • This pedal car axle shaft measures 16.375" overall length
    • The shaft is 3/8" diameter
    • Total "stroke" of the shaft is 3"

    Select the link below to view all parts for your pedal car.

    Please refer to application tab to double check part fitment. 

    Parts shown in the exploded view but not listed are currently not available. Sorry!

    Exploded Parts View for AMF 508-519 Firefighter (Link)





  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Pedal Car Parts, V-Front/Tooth Rear Axle Assembly with Saddle
    Pedal Car Parts, V-Front/Tooth Rear Axle Assembly with Saddle
    x
                

    V-Front/Tooth Rear Axle Assembly with Saddle

    Select the link below to view all parts for your pedal car.

    Please refer to application tab to double check part fitment. 

    Parts shown in the exploded view but not listed are currently not available. Sorry!

    Exploded Parts Diagram for Murray V-Front/Tooth Grille (Link)


Goto Previous PagePrevious Page
1 2 3 4 5 6