Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"friction steering joint" Page 1 of 2

  • AFCO 20032-2LF Low Friction Upper Ball Joint, Extended Length
    AFCO 20032-2LF Low Friction Upper Ball Joint, Extended Length
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!  It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

     

  • AFCO 200-1010 Low Friction Bolt-in Upper Ball Joint Kit, 1978-88 GM
    AFCO 200-1010 Low Friction Bolt-in Upper Ball Joint Kit, 1978-88 GM
    x
                

    What good is the latest, greatest speed equipment if your car dosen't handle right? A big part of handling is the ability of your suspension to travel freely.

    Each kit contains (4) hi-performance AFCO Low Friction ball joints and (4) AFCO Lightweight, friction-reducing control arms bushings. 

    • 106-2001010
      • Upper Ball Joints: Bolt In ('78-'88 Mid-size GM )
      • Lower Ball Joints: Press In, Extended Stud ('78-'88 Mid-size GM )
      • Bushings: 2 ea.
    • Stock appearing
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Lower input steering efforts and faster steering wheel return
    • Promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Lightweight lower bushings (nylon inserts for reduced weight and less friction) 
    • Provides consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • AFCO Low Friction IMCA/UMP Mod. Susp. Kit, Screw-in Ball Joint, 1978-88 GM
    AFCO Low Friction IMCA/UMP Mod. Susp. Kit, Screw-in Ball Joint, 1978-88 GM
    x
                

    What good is the latest, greatest speed equipment if your car dosen't handle right? A big part of handling is the ability of your suspension to travel freely.

    Each kit contains (4) hi-performance AFCO Low Friction ball joints and (4) AFCO Lightweight, friction-reducing control arms bushings. 

    • 106-2001008
      • Upper Ball Joints: Screw In ('78-'88 Mid-size GM)
      • Lower Ball Joints: Press In, Extended Stud ('78-'88 Mid-size GM)
      • Bushings: 2 ea.
    • Stock appearing
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Lower input steering efforts and faster steering wheel return
    • Promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Lightweight lower bushings (nylon inserts for reduced weight and less friction) 
    • Provides consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • AFCO IMCA/UMP Mod. Susp. Kit, Screw-in Ball Joint, Low Friction, 67-72 Chevelle
    AFCO IMCA/UMP Mod. Susp. Kit, Screw-in Ball Joint, Low Friction, 67-72 Chevelle
    x
                

    What good is the latest, greatest speed equipment if your car dosen't handle right? A big part of handling is the ability of your suspension to travel freely.

    Each kit contains (4) hi-performance AFCO Low Friction ball joints and (4) AFCO Lightweight, friction-reducing control arms bushings. 

    • 106-2001007
      • Upper Ball Joints: Screw In (Chrysler Type, Moog K772)
      • Lower Ball Joints: Press In, Extended Stud (Chevy Pickup Type, Moog K6117)
      • Bushings: 2 ea. (1.400 x .500), 2 ea. (1.650 x .500)
    • Stock appearing
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Lower input steering efforts and faster steering wheel return
    • Promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Lightweight lower bushings (nylon inserts for reduced weight and less friction) 
    • Provides consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • AFCO 20038-4LF Low Friction Lower Ball Joint, Long
    AFCO 20038-4LF Low Friction Lower Ball Joint, Long
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!  It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

     

  • AFCO 200-1009 1967-72 Chevelle Low Friction Suspension Kit, Bolt-in
    AFCO 200-1009 1967-72 Chevelle Low Friction Suspension Kit, Bolt-in
    x
                

    What good is the latest, greatest speed equipment if your car dosen't handle right? A big part of handling is the ability of your suspension to travel freely.

    Each kit contains (4) hi-performance AFCO Low Friction ball joints and (4) AFCO Lightweight, friction-reducing control arms bushings. 

    • 106-2001009
      • Upper Ball Joints: Bolt In ('67-'72 Chevelle)
      • Lower Ball Joints: Press In, Extended Stud (Chevy Pickup Type, Moog K6117)
      • Bushings: 2 ea. (1.400 x .500), 2 ea. (1.650 x .500)
    • Stock appearing
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Lower input steering efforts and faster steering wheel return
    • Promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Lightweight lower bushings (nylon inserts for reduced weight and less friction) 
    • Provides consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • AFCO 20033LF K5103 Low Friction Lower Ball Joint
    AFCO 20033LF K5103 Low Friction Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

    Checking Ball Joint Wear (PDF)

  • AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
    AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

    Checking Ball Joint Wear (PDF)

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .5 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .5 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .5" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.346"
    • Dimension "L" - 3.84"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • AFCO 20039LF Low Friction GM Lower Ball Joint
    AFCO 20039LF Low Friction GM Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    Checking Ball Joint Wear (PDF)

    See Application tab for corresponding vehicle models.  

  • AFCO 20038-1LF Low Friction 1973-95 Truck-Style Lower Ball Joint, Long
    AFCO 20038-1LF Low Friction 1973-95 Truck-Style Lower Ball Joint, Long
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

     

  • AFCO 20032LF K5208 Low Friction GM Upper Ball Joint
    AFCO 20032LF K5208 Low Friction GM Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    Checking Ball Joint Wear (PDF)

    For 1/2" raised pivot point use 106-200322LF

    See Application tab for corresponding vehicle models.  

  • AFCO 20032-1LF Low Friction 1973-95 Truck-Style Upper Ball Joint
    AFCO 20032-1LF Low Friction 1973-95 Truck-Style Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

     

  • AFCO 20036LF Low Friction 1960-66 Chrysler-Type Lower Ball Joint
    AFCO 20036LF Low Friction 1960-66 Chrysler-Type Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension. 

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer and Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Stock appearing, Meets or exceeds standard ball joint strength
    • Lower input steering efforts and faster steering wheel return

    Checking Ball Joint Wear (PDF)

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, 1 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, 1 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • 1" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.846"
    • Dimension "L" - 4.34"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .75 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .75 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .75" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.596"
    • Dimension "L" - 4.09"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .2" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.046"
    • Dimension "L" - 3.54"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1995 Chevy & GMC Trucks 

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • GM F-Body - 1969-81 Camaro/Firebird
    • GM X-Body - 1968-79 Nova/Apollo/Ventura, etc.
    • GM B-Body - 1971-96 Impala/Caprice
    • GM A-Body - 1964-81 Chevelle/Malibu/El Camino
    • GM G-Body - 1978-88 Monte Carlo/Regal/Cutlass

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22421S GM K5103 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22421S GM K5103 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22421 GM K5103 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22421 GM K5103 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K5103.
    • 1964-72 Chevelle ball joint
    • 1967-1969 Camaro/Firebird ball joint

    Precision Ball Joint Illustration (GIF)

  • Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint.  They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720038-1 and MOOG #K6117.

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joints Illustration (GIF)

  • Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.
    • Bolt-in (4-bolt) style and cross reference with MOOG #K6136.

    Precision Ball Joint Illustration (GIF)

  • Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, steel adjuster - IMCA Approved

    Precision Ball Joint Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, aluminum adjuster

    These are press-in style and cross reference Speedway part #91720038 and MOOG #K6141.

    Precision Ball Joints Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • Howe Racing 22320S 1968-89 Chrysler K772 Style Upper Ball Joint Steel
    Howe Racing 22320S 1968-89 Chrysler K772 Style Upper Ball Joint Steel
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    IMCA Approved. Same as Moog # K772.

    Precision Ball Joint Illustration

  • Howe 22300S 1963-71 Truck K6024 Style Upper Ball Joint/Steel Adjuster
    Howe 22300S 1963-71 Truck K6024 Style Upper Ball Joint/Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    1. This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds.
    2. This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Fits:

    • Mastersbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Howe, Shaw, Bullitt, Rayburn, Harris

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22300 1963-71 Truck K6024 Style Upper Ball Joint/Alum Cap
    Howe Racing 22300 1963-71 Truck K6024 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    1. This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds.
    2. This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Fits:

    • Mastersbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Howe, Shaw, Bullitt, Rayburn, Harris

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap
    Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    NOT IMCA Approved.

    Precision Ball Joint Illustration

    Precision Lower Ball Joint Application Chart

  • Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
    Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    IMCA Approved.

    Precision Ball Joint Illustration

    Precision Lower Ball Joint Application Chart

  • Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K6145.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Upper 917-22302

    • Bolt-in (4-bolt) style and cross reference with MOOG #K5208.
    Fits
    • 1970-81 Camaro/Firebird
    • 1973-81 Chevelle A-body
    • 1975-79 Nova
    • 1978-88 Monte Carlo G-body
    • 1971-96 Impala/Caprice 

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22320 68-89 Chrysler K772 Style Upper Ball Joint Aluminum Cap
    Howe Racing 22320 68-89 Chrysler K772 Style Upper Ball Joint Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    NOT IMCA Approved.

    Precision Ball Joint Illustration

  • Howe Racing 22420 GM K6145 Style Lower Ball Joint w/ Alum Cap
    Howe Racing 22420 GM K6145 Style Lower Ball Joint w/ Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720039 and MOOG #K6145.

    Precision Ball Joints Illustration (GIF)

    See Application tab for corresponding vehicle models. 

  • Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1976 Chevy Impala 

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22480 Repl Ball Joint Stud for 917-22421 K5103 Style
    Howe Racing 22480 Repl Ball Joint Stud for 917-22421 K5103 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1964-1972 Chevelle & Malibu 

    For Howe Precision Ball Joints ONLY.

  • Howe Racing 22470 Repl Ball Joint Stud for 917-22420 K6145 Style
    Howe Racing 22470 Repl Ball Joint Stud for 917-22420 K6145 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1977-1989 Impala
    • 1970-1981 Camaro
    • 1973-1988 Chevelle & Malibu

    For Howe Precision Ball Joints ONLY.

Goto Previous PagePrevious Page
1 2