Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"friction roller arms" Page 1 of 1

  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 3/8 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 3/8 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. Includes polylocks.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. polylocks included

     

  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 7/16 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 7/16 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included

     

  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 3/8 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. 

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included

     

  • Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 7/16 Stud
    Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. 

    Includes polylocks.  

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 7/16 Stud
    Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 7/16 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 3/8 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    These Small Block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 7/16 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    These S/B Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 3/8 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 3/8 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Big Block Chevy Stainless Steel Roller Rocker Arms
    Big Block Chevy Stainless Steel Roller Rocker Arms
    x
                

    These full-roller Stainless Steel rockers incorporate an exceptional lightweight design that provides plenty of clearance for large diameter springs. Manufactured from premium quality 15-5 PH stainless steel, a superior alloy high in Nickel and Chromium, this rigid material provides high yield strength to help resist deflection and has extraordinary fatigue resistance.

    Features full-cage friction reducing needle bearings. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to resist the severity of racing and to minimize "scrubbing". Each rocker body is hand-polished, assembled and carefully inspected to provide our customers with some of the finest quality rocker arms available to the racing and performance industry. 

    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included

    For 1968-1997, 302-460 c.i. Ford

    For 396-454 c.i. B/B Chevy V8. 1.7:1 ratio for 7/16" stud. Includes polylocks.

    For 348/409 c.i. Chevy W-Series V8. 1.7:1 ratio for 7/16" stud. Includes polylocks. 

  • SBC Sportsman Steel Roller Tip Rocker Arms, Split Ratio, 3/8 Stud, Self Aligning
    SBC Sportsman Steel Roller Tip Rocker Arms, Split Ratio, 3/8 Stud, Self Aligning
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
    • 1.5/1.6 Ratio
  • SBC Sportsman Steel Roller Tip Rocker Arms, Split Ratio, 7/16 Stud
    SBC Sportsman Steel Roller Tip Rocker Arms, Split Ratio, 7/16 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
    • 1.5/1.6 Ratio
  • Blumax SBC Aluminum Roller Rocker Arms, Split Ratio, 3/8 Stud
    Blumax SBC Aluminum Roller Rocker Arms, Split Ratio, 3/8 Stud
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Blumax Ford 302-460 Aluminum Roller Rocker Arms
    Blumax Ford 302-460 Aluminum Roller Rocker Arms
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum which gives you superior strength over other rockers. Machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. Includes polylocks.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
    See Applications tab for fitting information

     

  • Blumax SBC Alum. Roller Rocker Arms, Split Ratio, 7/16 Stud, Self Aligning
    Blumax SBC Alum. Roller Rocker Arms, Split Ratio, 7/16 Stud, Self Aligning
    x
                

    BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem.

    • Designed to meet the demands of most high-lift roller camshaft profiles
    • Specially machined to accommodate larger valve springs and retainers
    • SAE-52100 Full complement precision needle and cage roller bearings
    • Anodized for a superior finish and to reduce operating temperatures
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
  • Small Block Chevy Stainless Roller Rocker Arms, Split Ratio, 7/16 Stud
    Small Block Chevy Stainless Roller Rocker Arms, Split Ratio, 7/16 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
    • 1.5/1.6 Ratio
  • SBC Stainless Steel Roller Rocker Arms, Split Ratio, 3/8 Stud, Self Aligning
    SBC Stainless Steel Roller Rocker Arms, Split Ratio, 3/8 Stud, Self Aligning
    x
                

    These stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
    • 1.5/1.6 Ratio
  • Small Block Chevy Stainless Steel Roller Rocker Arms-Split Ratio-3/8 Stud
    Small Block Chevy Stainless Steel Roller Rocker Arms-Split Ratio-3/8 Stud
    x
                

    These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

    • Designed for higher open valve spring pressures
    • Strong 15-5PH stainless steel
    • Specially cast and machined for larger valve springs and retainers
    • Light weight with integral pushrod seat
    • Oversize trunions and full roller precision needle and cage bearings
    • More needle bearings for increased performance and rocker life
    • CNC machined pushrod cups and heat-treated Cr40 roller tips
    • Internal oiling system for long lasting performance
    • H.D. Polylocks included
    • 1.5/1.6 Ratio
  • Pro Series Small Block Chevy Aluminum Rocker Arms
    Pro Series Small Block Chevy Aluminum Rocker Arms
    x
                

    PRW Pro Series Aluminum Rocker Arms are used around the world by professional racers, engine builders and hot rod enthusiasts, offering outstanding power and performance advantages for street, strip, and track applications. Made from high strength 6061-T6 aluminum extrusions, each piece is precision CNC machined and finished by hand to ensure that out customers receive the very best PRW has to offer. PRW stud mount aluminum rockers are specially machined to allow for larger springs and retainers with full-cage friction reducing bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize wear that naturally occurs between the roller tip and the valve stem.

    • Rated at 750 lbs. open spring pressure
    • Includes rocker pivot balls and PRW ROCKERLOCS™
    • Internal Oiling system for long lasting performance
    • Available for self-aligning applications and in split sets
    • Wide assortment of ratios to suit almost any cam profile
    • Features full complement friction reducing needle bearings 
    • Engine Applications:
      • Model:  Chevrolet 262-400
      • Years:  1955-86
    • 1.5/1.6 X 7/16" Stud Mount
    • Set of 16

    ***Guide Plates Required

  • COMP Cams 17002-16 SBC High Energy Aluminum Rocker Arms-1.6:1-3/8 Stud
    COMP Cams 17002-16 SBC High Energy Aluminum Rocker Arms-1.6:1-3/8 Stud
    x
                

    High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use. Includes poly locks.

    • Larger-than-stock aluminum body for superior strength with light overall weight
    • Needle bearing fulcrum and roller tip
    • Designed to be stiffer and more durable
    • Specially engineered fulcrum and roller tip create less friction than sliding factory models
    • Lowers oil temperatures, thus improving both response and horsepower
    • Snap rings lock the trunion and bearings in place
  • COMP Cams 17004-16 SBC High Energy Alum Rocker Arms, 1.5:1, 7/16 Stud
    COMP Cams 17004-16 SBC High Energy Alum Rocker Arms, 1.5:1, 7/16 Stud
    x
                

    High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use. Includes poly locks.

    • Larger-than-stock aluminum body for superior strength with light overall weight
    • Needle bearing fulcrum and roller tip
    • Designed to be stiffer and more durable
    • Specially engineered fulcrum and roller tip create less friction than sliding factory models
    • Lowers oil temperatures, thus improving both response and horsepower
    • Snap rings lock the trunion and bearings in place
  • COMP Cams 17005-16 SBC High Energy Alum Rocker Arms, 1.6:1, 7/16 Stud
    COMP Cams 17005-16 SBC High Energy Alum Rocker Arms, 1.6:1, 7/16 Stud
    x
                

    High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use. Includes poly locks.

    • Larger-than-stock aluminum body for superior strength with light overall weight
    • Needle bearing fulcrum and roller tip
    • Designed to be stiffer and more durable
    • Specially engineered fulcrum and roller tip create less friction than sliding factory models
    • Lowers oil temperatures, thus improving both response and horsepower
    • Snap rings lock the trunion and bearings in place
  • COMP Cams 17001-16 SBC High Energy Aluminum Rocker Arms-1.5:1-3/8 Stud
    COMP Cams 17001-16 SBC High Energy Aluminum Rocker Arms-1.5:1-3/8 Stud
    x
                

    High Energy Die Cast Aluminum Roller Rocker Arms for small block Chevy V8 265-400 applications are perfect for street and moderate race use. Includes poly locks.

    • Larger-than-stock aluminum body for superior strength with light overall weight
    • Needle bearing fulcrum and roller tip
    • Designed to be stiffer and more durable
    • Specially engineered fulcrum and roller tip create less friction than sliding factory models
    • Lowers oil temperatures, thus improving both response and horsepower
    • Snap rings lock the trunion and bearings in place
  • SBC Sportsman Steel Roller Tip Rockers Split Ratio, 3/8 Stud
    SBC Sportsman Steel Roller Tip Rockers Split Ratio, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls
    • 1.5/1.6 Ratio
  • Garage Sale - Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 3/8 Stud
    Garage Sale
    Garage Sale - Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.6:1, 3/8 Stud
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    • 4340 steel rocker body
    • Adds up to 30 HP over stock rockers
    • Excellent replacement for stock or sportsman engines
    • Eliminates noise & slop associated with worn or high mileage rockers
    • Includes polylocks and grooved balls

     

    These are garage sale priced because they have been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 15 Aluminum Rockers 1.5x3/8 SBC
    Garage Sale
    Garage Sale - 15 Aluminum Rockers 1.5x3/8 SBC
    x
                Please view the product's page for more information
            
  • GARAGE SALE - SPORTSMAN ROCKER-1.5x7/16in
    Garage Sale
    GARAGE SALE - SPORTSMAN ROCKER-1.5x7/16in
    x
                

    If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

    Includes polylocks.
     
    This is Garage Sale priced because it not include rocker balls.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS