Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford ton disc brake" Page 1 of 1

  • Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    x
                

    This complete disc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindles while retaining the original 5 on 5-1/2" bolt circle.

    This kit will work with spindles having either original steering arms or with flat steel steering arms. It will NOT work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications. Will NOT work with early Ford factory wire or steel drum brake wheels. You will need to use a later disc brake steel wheel or aftermarket wheel.

    910-31909 Instructions (PDF)

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-1/2 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-1/2 Inch
    x
                

    This kit installs '76-'81 Dodge Aspen rotors or Chrysler equivalent and '70-'77 Camaro or GM equivalent calipers on 1948-1956 Ford F-100 spindles.

    916-31982 Instructions (PDF)

  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                

    This kit installs '73-'93 Ford F-150 11-3/4" rotors and '71-'76 Chevy Impala calipers on 1948-1956 Ford F-100 spindles.

    Instructions (PDF) 

  • Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    x
                

    This basic front disc brake conversion kit easily installs big '73-'93 Ford F-150 2WD 11-3/4" rotors on your '37-'48 Ford car and '37-'47 Ford half-ton pickup truck spindles while retaining the original 5 on 5-1/2" wheel bolt circle. The calipers used with this kit are '71-'76 Chevy Impala single-pistion units.

    Kit includes:

    • Caliper brackets
    • Hardware
    • New bearing and seal adapters

    Note: This kit will work with spindles having either original steering arms or with flat steel steering arms. It will not work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications.

    Early Ford Brake Kit Installation Instructions (PDF)

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-3/4 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-3/4 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-3/4 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-3/4 Inch
    x
                

    This kit installs '73-'77 GM mid-size car 11" rotors and '70-'77 Camaro or GM equivalent calipers on 1948-1956 Ford F-100 spindles.

  • Deluxe Disc Brake Kits: 1957-1964 Ford Half Ton
    Deluxe Disc Brake Kits: 1957-1964 Ford Half Ton
    x
                

    These kits allow you to put disc brakes on your 1957-64 Ford 1/2 ton pick-up.

    Kit Includes:

  • 11-3/4" brake rotor, 5 x 5-1/2"
  • Brake pads
  • GM Caliper slide bolts
  • Rubber Brake Lines
  • Rebuilt 1971-76 calipers (7/16"-20 inlets)
  • Brake brackets
  • Hardware
  • Seals
  • Inner bearing cups
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Dust caps
  • Instructions

    Instructions
  •  

     

  • Basic Disc Brake Kits: 1957-1964 Ford Half Ton
    Basic Disc Brake Kits: 1957-1964 Ford Half Ton
    x
                

    This kit allows you to put disc brakes on your 1957-1964 Ford 1/2 ton pick-ups. Uses 1979-1993 Ford F-100/F-150 or equivalent rotors and 1971-1987 GM ½ Ton truck or equivalent calipers (not included). Works with 5 on 5-1/2 inch bolt patterns.

    Kit includes:

  • Brake brackets
  • Hardware
  • 916-31985 Instructions (PDF)

  • 1935-40 Ford Master Cylinder with Pedal Bracket
    1935-40 Ford Master Cylinder with Pedal Bracket
    x
                

    Bolt a non-boosted master cylinder to your 1935-1940 Ford car and 1/2 ton pickup frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female.  

    Kit includes master cylinder, pedal assembly and hardware.

    Brake System Builder's Tip (Link)

    NOTE: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an automatic transmission. 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Bearing & Seal Kit for Brake Kit 910-31909
    Bearing & Seal Kit for Brake Kit 910-31909
    x
                

    Bearing & seal kit for 1971-76 Impala caliper/11.75" rotor/5 x 5.5" bolt pattern onto 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindle brake kit part 910-31909.

    Kit includes:

    • cone outer wheel bearings
    • tapered outer bearing cups
    • cone inner bearings
    • tapered inner bearing cups
    • seals
  • Garage Sale - 1948-56 Ford Half-Ton Disc Brake Brackets, 5 On 4-1/2 Inch
    Garage Sale
    Garage Sale - 1948-56 Ford Half-Ton Disc Brake Brackets, 5 On 4-1/2 Inch
    x
                

    This kit installs '76-'81 Dodge Aspen rotors or Chrysler equivalent and '70-'77 Camaro or GM equivalent calipers on 1948-1956 Ford F-100 spindles.

    916-31982 Instructions (PDF)

     

    These brackets are garage sale priced because they have been test fit and returned.  Brackets only. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                Please view the product's page for more information
            
  • Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                

    This kit installs '73-'93 Ford F-150 11-3/4" rotors and '71-'76 Chevy Impala calipers on 1948-1956 Ford F-100 spindles.

    Instructions (PDF) 

     

    This is garage sale priced because the bearing and seal adapters that are either pressed on the spindle or heated and pushed on the spindle to increase the O.D. for the seal and also the inner bearing are missing.  

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                

    This kit installs '73-'93 Ford F-150 11-3/4" rotors and '71-'76 Chevy Impala calipers on 1948-1956 Ford F-100 spindles.

    Instructions (PDF) 

     

    This bracket kit is garage sale priced because it is missing the spindle nuts and hardware, whay you see is what you get.  One of the brackets also appears to have been installed and returned.

     

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

  • Garage Sale - Basic Disc Brake Kit, 1957-64 Ford Half Ton
    Garage Sale
    Garage Sale - Basic Disc Brake Kit, 1957-64 Ford Half Ton
    x
                

    This kit allows you to put disc brakes on your 1957-1964 Ford 1/2 ton pick-ups. Uses 1979-1993 Ford F-100/F-150 or equivalent rotors and 1971-1987 GM ½ Ton truck or equivalent calipers (not included). Works with 5 on 5-1/2 inch bolt patterns.

    Kit includes:

  • Brake brackets
  • Hardware
  • 916-31985 Instructions (PDF)

    This bracket kit is garage sale priced because it has been test fit and returned.  This kit is missing the 4 spacers, what you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - 1948-56 Ford Pick-Up Basic Disc Brakc Bracket Kit, 5 on 4-1/2
    Garage Sale
    Garage Sale - 1948-56 Ford Pick-Up Basic Disc Brakc Bracket Kit, 5 on 4-1/2
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    916-31982 Instructions (PDF)

     

    This brake kit is garage sale priced because it has been bolted on and returned.  This one is also missing bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Disc Brake Brackets 1948-56 Ford Half Ton
    Garage Sale
    Garage Sale - Disc Brake Brackets 1948-56 Ford Half Ton
    x
                

    Brackets only.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 x 5-1/2"
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 x 5-1/2"
    x
                

     

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    Instructions (PDF)

     

    This item is garage sale priced because it is missing the bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    This brake kit is garage sale priced because it is missing the 6 spacers.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit, 5 X 5-1/2
    x
                

     

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    Instructions (PDF)

     

    This item is garage sale priced because it is missing the bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - 1948-56 Pick-Up Basic Brake Kit
    Garage Sale
    Garage Sale - 1948-56 Pick-Up Basic Brake Kit
    x
                

     

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups.

    Kit Includes:

    • Brake brackets
    • Hardware

    Instructions (PDF)

     

    This item is garage sale priced because it is missing the bearing adapters.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS