Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford spindle bolt" Page 1 of 5

  • Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    x
                

    Easily installs 11" Ford/Mopar rotors and 1969-1977 midsize GM single piston calipers to your 1937-1948 Ford passenger car spindles. No machine work needed. Great for street rods based on 1932-1948 Fords, however, these kits are much too large and heavy for a T-bucket or an early roadster.

    Not for use with bolt-on steering arms.

    Note: Some applications may require you to purchase item (617-8562) with this kit.

    910-31940 Instructions (PDF)

  • Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    Wheel Cylinder Inlet: 7/16"-20 straight thread
    NOT 7/16"-20 IFF
    Inlet fitting will require a sealing washer or O-ring style fitting
    Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically
    If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern

    We recommend use of adapter rings 916-31928 to keep the spindle centered in the backing plate 

  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Bolt Kit for 1937-48 Ford Spindle Flat Steering Arms
    Bolt Kit for 1937-48 Ford Spindle Flat Steering Arms
    x
                

    For use with our '37-'48 Ford style spindles, steering arms, and brake brackets. 

    Kit includes:

    • (4) 1/2"20 x 2" fine thread button head SCS SAE bolts
    • (4) 1/2" SAE Hex Lock Nuts
    • (4) 1/2" Thru hard washers
  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    x
                Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '37-'41 Ford style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    This basic front disc brake conversion kit allows you to bolt on modern disc brakes to your '37-'48 Ford passenger car style spindles. Kit comes with the caliper bracket, inner bearing and seal, and required hardware. Outer bearing 912-TLM11949 is not supplied with this kit.

    Not for use with bolt-on steering arms.

    Kit works with '76-'80 Dodge Aspen 11" rotors (5 on 4-1/2" wheel bolt pattern) and '69-'77 GM mid-size calipers.

    916-31921 Instructions (PDF)

  • Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    x
                GM bolt pattern 5 on 4-3/4"

    Easily installs 11" rotors and 1969-77 mid-size GM single piston calipers to your 1937-48 Ford passenger car spindles. No machine work needed.

    Kit Includes:
  • New 11" brake rotor, 5 x 4-3/4"
  • Semi-metallic brake pads
  • GM Caliper slide bolts
  • Rebuilt 1969-77 calipers (7/16"-20 inlets)
  • 1973-77 GM brake brackets
  • 1973-77 hardware
  • New bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Rubber Brake Lines
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Seals
  • Bolt kit for flat steering arm
  • Dust caps
  • Instructions
  • Not for use with bolt-on steering arms.  The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or earlier roadster.

    910-31941 Instructions (pdf)

  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Spring-Over 4 Inch Drop Front End for Ford Spindles, Plain
    Spring-Over 4 Inch Drop Front End for Ford Spindles, Plain
    x
                For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Spring-Over 4 Inch Drop Front End for Ford Spindles, Stainless
    Spring-Over 4 Inch Drop Front End for Ford Spindles, Stainless
    x
                For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Spring-Over 4 Inch Drop Front End for Ford Spindles, Chrome
    Spring-Over 4 Inch Drop Front End for Ford Spindles, Chrome
    x
                For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Chrome 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    Chrome 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly
  • Plain 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    Plain 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly
  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Chrome Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Chrome Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Disc Brake Kit for Total Performance Spindles, 5 x 4-1/2
    Disc Brake Kit for Total Performance Spindles, 5 x 4-1/2
    x
                

    Easily installs 11" vented rotors and '69-'77 midsize GM single piston calipers to your classic Total Performance T-bucket spindles. Kit comes complete with new rotors and semi-metallic pads, new bearings and seals, new caliper bolts and rebuilt calipers, along with caliper mounting brackets, bushings, hardware and instructions.

    Has a 5 on 4-1/2" Ford/Mopar style wheel bolt pattern with 1/2" Fine studs.

     

    Spindle Guide (Link)

  • Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    916-39506 Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
    Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
    x
                Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. Please see below for suggested 1973-77 GM type 11" brake rotor part #'s required.

    Kit Includes:
    • GM to Ford brake brackets
    • 1978-Up hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts

    This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.

    702-4475 Instructions (PDF)

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Ford Upper Steering Arm, Plain, 6-1/4 Inch, Tapered
    Ford Upper Steering Arm, Plain, 6-1/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Wilwood Bolt-On Front / Rear Brake Kit, Ford Spindles
    Wilwood Bolt-On Front / Rear Brake Kit, Ford Spindles
    x
                Give your T roadster the ultimate stopping power with Wilwood disc brakes. These kits feature aluminum hubs with both 5-on-4.5" and 5-on-4.75" bolt patterns, rotors, four-piston calipers with pads, plus all of the bearings, seals, brackets and hardwear you need for installation on our Ford style spindles. Rear kit bolts on new-style Big Ford Ends.
            
  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Chrome
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

Goto Previous PagePrevious Page
1 2 3 4 5