Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford performance tech" Page 1 of 9

  • Ford C4 Performance Torque Converter, 2500-2800 Stall-24 Spline
    Ford C4 Performance Torque Converter, 2500-2800 Stall-24 Spline
    x
                

    Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Ford C4 Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your Ford C-4 Automatic (with filler tube in the case). With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible.

    • 2500-2800 stall - 12" diameter, 24 spline
    • Ford C-4 transmission - 10-1/2" bolt circle

    All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.

    12" high stall converters are designed for S/B V-8 cars with performance camshafts and high ratio rear end gears (3.55-3.73 minimum).

    Made in the U.S.A.

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

  • Speedway Aluminum Radiator for 1932 Ford
    Speedway Aluminum Radiator for 1932 Ford
    x
                

    There is no reason not to run an aluminum radiator in your '32 Ford hot rod anymore. At first people were leery they would not stand up to vibration. Then they thought they would be damaged easily. Our radiators have stood the test of time and have proven themselves to be reliable, tough and efficient in both cooling and cost. These radiators are designed for Chevy engines in a 1932 Ford chassis and work with stock '32 grille shells.

    • For Chevy engine in a 1932 Ford chassis
    • Use with stock height '32 Ford grille shell
    • Two rows of 1" furnace brazed cores
    • Dummy filler neck in original location
    • Includes brackets for radiator support rods
    • Built in automatic transmission cooler with 1/8" NPT inlet
    • Drain petcock
    • 1/2" NPT port at bottom for sending unit
    • Stamped upper & lower tanks
    • All tig welded assembly

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • Flathead Ford No-Lead Hardened Valve Seat, Exhaust
    Flathead Ford No-Lead Hardened Valve Seat, Exhaust
    x
                

    The flathead Ford V8 was designed to run on fuel with high levels of lead, but even with leaded fuel, the stock valves will eventually hammer the seats out, which will close up the valve lash and leave your valves hanging open...that is if you don't seize a valve to the guides first!

    Remember what year your engine was built and how fatigued the valve train components are. Henry may have built them right with the technology he had available then, but this is now and we have the modern components you need.

    These 0.060 oversize valve seats are made of a specially hardened material to combat the effect of unleaded fuel and higher performance. Machine work is required for installation. Intake has a 30° seat and exhaust has a 45° seat.

    Flathead Valve Assembly (Link)

  • 1932 Ford HID Headlights w/ LED Turn Signal
    1932 Ford HID Headlights w/ LED Turn Signal
    x
                

    Bringing your hot rod out of the dark ages!  This is the same beautifully polished stainless headlight we've always offered but with today's technology inside!

    • Double your light intensity and visibility with HID technology
    • True Arc HID (High Intensity Discharge)
    • The same lighting technology found on today's supercars an other high performance vehicles
    • Wiring pigtail matches standard lighting configurations for easy retro-fit conversion
    • HID Ballast is hidden behind reflector
    • Integrated amber LED turn signals
  • Book - 335 HP Flathead Ford V8 Performance Handbook
    Book - 335 HP Flathead Ford V8 Performance Handbook
    x
                This book by Joe Abbin will show you 'real' horsepower figures from 'real' Flathead Ford engines that were built and run on the dyno, the street and the dragstrip. Clearly shows each engine (naturally aspirated and supercharged) being built and dyno tested. 138 pages.
            
  • Walker BZ491-2 Chopped 1932 Lo-Boy Brass Radiator - Small Block Ford
    Walker BZ491-2 Chopped 1932 Lo-Boy Brass Radiator - Small Block Ford
    x
                

    Latest high efficiency core with a 6" chop. Perfect fit with Lo-Boy grille shell and grille insert. The standard brass/copper version is best for mild small blocks.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

     

  • Book/Manual - High-Performance Differentials, Axles & Drivelines
    Book/Manual - High-Performance Differentials, Axles & Drivelines
    x
                All too often, when an enthusiast builds a  high-performance engine, swaps a more powerful engine into a car, or  mounts sticky tires, the driveline components simply can't handle the  added torque and fail. In addition, differential, axles, and driveline  parts have a limited life span under the power of a high-performance  engine. Also, the proper gear ratios need to be selected and installed  for maximum performance on the street, strip, or track. The performance  of the driveshaft, differential, axle, and other driveline components  needs to match the performance level of a particular engine, so maximum  efficiency, longevity, and reliability can be realized.

    This book covers everything you need to know about selecting the most desirable gear ratio, rebuilding differentials and other driveline components, and most importantly, matching the correct driveline components to engine power output. Learn how to set up a limited-slip differential, install high-performance axle shafts, swap out differential gears, and select the best available products for the driveline. This book covers the Chevy 12-bolt, Ford 8.8-inch, Dana units, and many other popular high-performance axles and rear ends. In addition, it explains rear differential basics, rear differential housings, rebuilding open rear differentials, limited-slip differentials, and factory differentials. Ring and pinion gears, axle housings, axle shafts, driveshafts, and U-joints are also cove
  • Quarter Master 191300 Ford Clutch and Flywheel Combo
    Quarter Master 191300 Ford Clutch and Flywheel Combo
    x
                Here is the ultimate S/B Ford Street Stock clutch! The 10.4" solid hub organic disc, lightweight steel-faced aluminum pressure plate, and steel flywheel combine to provide quick-revving performance with excellent holding capacity.   
    • 157 tooth steel flywheel - 30.8 lbs
    • Fits 1-1/8" x 10 spline input
    • 10.4" Solid Hub Organic Friction Disc
    • Internal Balance Only
    • Lightweight aluminum pressure plate

    Quarter Master Engineering & Design (PDF)

    Note: For Race applications only - not intended for Street use.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • AFCO 80102FN Universal Fit Racing Radiator, 31 Inch Ford/Mopar
    AFCO 80102FN Universal Fit Racing Radiator, 31 Inch Ford/Mopar
    x
                

    Of all the components in the cooling system, the performance of the radiator is the most critical. Afco understands the vital role the radiator plays in protecting the investment you have in your car. That is why they make no excuses or compromises in constructing the best aftermarket radiators in the industry. Don't trust your pride and joy to anything less than Afco quality. 

    Afco radiators allow your car to remain at constant temperature, which means that power delivery is more consistent. Using years of experience, advanced design, and thorough testing, Afco radiators are designed to promote optimal air flow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application.

    • 100% Aluminum construction (no epoxy)
    • 100% TIG welded
    • 100% pressure-tested
    • Cast filler necks feature screw-in-bleed, won't crack or leak with age\

    106-80102FN Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 80100FN Universal Fit Racing Radiator, 22 Inch Ford/Mopar
    AFCO 80100FN Universal Fit Racing Radiator, 22 Inch Ford/Mopar
    x
                

    Of all the components in the cooling system, the performance of the radiator is the most critical. Afco understands the vital role the radiator plays in protecting the investment you have in your car. That is why they make no excuses or compromises in constructing the best aftermarket radiators in the industry. Don't trust your pride and joy to anything less than Afco quality. 

    Afco radiators allow your car to remain at constant temperature, which means that power delivery is more consistent. Using years of experience, advanced design, and thorough testing, Afco radiators are designed to promote optimal air flow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application.

    • 100% Aluminum construction (no epoxy)
    • 100% TIG welded
    • 100% pressure-tested
    • Cast filler necks feature screw-in-bleed, won't crack or leak with age

    106-80100FN Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 80101FN Universal Fit Racing Radiator, 27-1/2 Inch Ford/Mopar
    AFCO 80101FN Universal Fit Racing Radiator, 27-1/2 Inch Ford/Mopar
    x
                

    Of all the components in the cooling system, the performance of the radiator is the most critical. Afco understands the vital role the radiator plays in protecting the investment you have in your car. That is why they make no excuses or compromises in constructing the best aftermarket radiators in the industry. Don't trust your pride and joy to anything less than Afco quality. 

    Afco radiators allow your car to remain at constant temperature, which means that power delivery is more consistent. Using years of experience, advanced design, and thorough testing, Afco radiators are designed to promote optimal air flow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application.

    • 100% Aluminum construction (no epoxy)
    • 100% TIG welded
    • 100% pressure-tested
    • Cast filler necks feature screw-in-bleed, won't crack or leak with age

    106-80101FN Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Griffin Radiators 4-227BX-FAC 1927 Ford T Aluminum Radiator, Ford V8
    Griffin Radiators 4-227BX-FAC 1927 Ford T Aluminum Radiator, Ford V8
    x
                Please view the product's page for more information
            
  • AFCO 80127FN IMCA Style Chassis Ford/Mopar Universal Radiator - 24 In
    AFCO 80127FN IMCA Style Chassis Ford/Mopar Universal Radiator - 24 In
    x
                

    Of all the components in the cooling system, the performance of the radiator is the most critical. Afco understands the vital role the radiator plays in protecting the investment you have in your car. That is why they make no excuses or compromises in constructing the best aftermarket radiators in the industry. Don't trust your pride and joy to anything less than Afco quality. 

    Afco radiators allow your car to remain at constant temperature, which means that power delivery is more consistent. Using years of experience, advanced design, and thorough testing, Afco radiators are designed to promote optimal air flow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application.

    • 100% Aluminum construction (no epoxy)
    • 100% TIG welded
    • 100% pressure-tested
    • Cast filler necks feature screw-in-bleed, won't crack or leak with age

    106-80127FN Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Powergen 1949-53 Flathead Ford One Wire Alternator, 12 Volt
    Powergen 1949-53 Flathead Ford One Wire Alternator, 12 Volt
    x
                

    If you like traditional looks and reliable, modern performance, you’ll love this cool Flathead 1-wire alternator. It has the look of an original generator, but is really a 12-volt, negative-ground alternator that produces 60 amps at idle and 75 amps going down the road. This model is designed to fit 1949-1953 Ford & Mercury Cars and 1948-1953 Ford Trucks with Flathead V8s and features a simple one-wire hookup.

    We offer this one wire alternator in black painted or polished aluminum, and both include stock-appearing mounting brackets (the stock fan carrier bolts to that bracket) and pulleys that accept wide 5/8” belts.

    • Easy one-wire hookup
    • 5/8" wide belt pulley included
    • If using 3/8" wide belt, order pulley # 91067178
    • Uses stock-appearing bracket and fan carrier bolts

    910-67165 Instructions (PDF)

  • Griffin Radiators 4-240BW-AAX 1940 Ford Pickup Alum Radiator, Chevy V8
    Griffin Radiators 4-240BW-AAX 1940 Ford Pickup Alum Radiator, Chevy V8
    x
                

    With 2 rows of 1" tubes furnace brazed into the core, Griffin's 1940 Ford Pickup radiators provide 40% greater tube-to-fin contact over a copper/brass radiator. This gives you far greater cooling efficiency! For Chevy V-8 engines. 

    • Built-in HD automatic transmission oil cooler
    • Hood support brackets are included
    • Brackets on side for gille shell
    • Brackets on top for support rods
    • No A/C Condenser

    Griffin Chevy Engine Radiator Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    x
                

    You don't need to spend a fortune to get a set of top-performing, lightweight aluminum cylinder heads for your small-block Ford V8. These Flo-Tek heads have a long list of high-end features, minus the hefty price tag. Sold as complete assemblies only.

    • 180cc intake runners
    • 62cc exhaust runners
    • 1.94" intake and 1.54" swirl-polished exhaust valves
    • 58cc chambers
    • Performance valve springs (.550 lift)
    • 115 lbs. spring seat pressure
    • Compatible with most flat tappet camshafts
    • Hardened locks and retainers
    • PC seals
    • High-temp exhaust seats
    • Multi angle valve job
    • Bronze guides
    • 3/8" rocker studs and guide plates

    See how these Flo-Tek heads stack up against the competition in Car Craft Magazine's tech article; 6 Small Block Ford Cylinder Heads That Work.

    Head Flow Specs:

    Lift        Intake        Exhaust
    .400      209          137
    .500      223          161
    .600      248          191

  • Griffin Radiators 4-241BW-AAX 1941 Ford Pickup Alum Radiator, Chevy V8
    Griffin Radiators 4-241BW-AAX 1941 Ford Pickup Alum Radiator, Chevy V8
    x
                

    With 2 rows of 1" tubes furnace brazed into the core, Griffin's 1941 Ford Pickup radiators provide 40% greater tube-to-fin contact over a copper/brass radiator. This gives you far greater cooling efficiency! For Chevy V-8 engines. 

    • Built-in HD automatic transmission oil cooler
    • Hood support brackets are included
    • Brackets on side for gille shell
    • Brackets on top for support rods
    • No A/C Condenser

    Griffin Chevy Engine Radiator Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 80103FN Universal Fit Racing Radiator, 26 Inch Ford/Mopar
    AFCO 80103FN Universal Fit Racing Radiator, 26 Inch Ford/Mopar
    x
                Please view the product's page for more information
            
  • AFCO 80102-2FN Universal Fit Racing Radiator, 30-7/8 Inch Ford/Mopar
    AFCO 80102-2FN Universal Fit Racing Radiator, 30-7/8 Inch Ford/Mopar
    x
                Please view the product's page for more information
            
  • Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    x
                

    Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

    Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

    916-31926 Instructions (PDF) 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Powergen 1939-48 Flathead Ford One Wire Alternator, 12 Volt
    Powergen 1939-48 Flathead Ford One Wire Alternator, 12 Volt
    x
                

    If you like traditional looks and modern performance, you’re gonna love this cool Flathead 1-wire alternator. It has the look of an original generator, but is really a 12-volt, negative-ground alternator that produces 60 amps at idle and 75 amps going down the road.

    Designed to fit 1939-1948 Ford & Mercury Cars and 1939-1947 Ford Trucks with Flathead V8s. These feature a simple one-wire hookup and are available in black or polished aluminum.

    • Retains original generator appearance
    • Easy one-wire hookup
    • 60 amps at idle
    • 75 amps at road speed
    • Uses stock mounting bracket
    • Includes pulley for 5/8" wide belt
    • Pulleys for 3/8" wide belt available seperately

    Flathead Ford One Wire Alternator Instructions (PDF)

    Powergen Cutaway View (Link) 

  • Richmond Gear 92-0690-2800 Powertrax Ford 9 Inch Locking Differential
    Richmond Gear 92-0690-2800 Powertrax Ford 9 Inch Locking Differential
    x
                

    The Powertrax Traction System is the latest design in traction adding differential technology. It combines the smooth operation of a limited-slip differential, with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring design reduce the backlash and therefore driveline windup. An ultra-strength alloy material is used throughout, which is 67% stronger than titanium.

    Installation is simple because no ring and pinion set-up is required. In addition, no special tools or oils are needed (installs in about one hour). Step by step model specific instructions are provided with every kit.

    • Positive traction - full locker
      • Delivers engine power to both wheels when coming off the line
      • Upgrade and improve your times and your vehicles reputation 
    • Smooth quiet operation - fully automatic
    • Do-it-yourself - installs in about one hour
    • No special tools required
    • Works for both cars and trucks
    • Gives 2-wheel drive trucks the traction power of 4x4's
    • Excellent replacement for Trac loc style lockers
  • Powergen 1939-48 Flathead Ford One Wire Alternator, 6 Volt
    Powergen 1939-48 Flathead Ford One Wire Alternator, 6 Volt
    x
                

    If you like traditional looks and modern performance, you’re gonna love this cool Flathead 1-wire alternator. It has the look of an original generator, but is really a 6-volt, positive-ground alternator that produces 60 amps at idle and 75 amps going down the road.

    Designed to fit 1939-1948 Ford & Mercury Cars and 1939-1947 Ford Trucks with Flathead V8s. These feature a simple one-wire hookup and are available in black or polished aluminum.

    • Retains original generator appearance
    • Easy one-wire hookup
    • 60 amps at idle
    • 75 amps at road speed
    • Uses stock mounting bracket
    • Includes pulley for 5/8" wide belt
    • Pulleys for 3/8" wide belt available seperately

    910-67172 Instructions (PDF)

  • Griffin Radiators 4-227BX-AAC 1927 Ford T Aluminum Radiator, Chevy V8
    Griffin Radiators 4-227BX-AAC 1927 Ford T Aluminum Radiator, Chevy V8
    x
                

    Griffin Aluminum radiators give superior cooling over a brass/copper radiator. Features 2 rows of 1" tubes furnace brazed into the core which provides 40% greater tube-to-fin contact over a copper/brass radiator. WILL NOT fit a stock '27 grille shell, but it will work with our 900-2000 fiberglass shell.

    • Built-in HD automatic transmission oil cooler
    • Hood support brackets are included
    • Brackets on side for gille shell
    • Brackets on top for support rods
    • Built-in"dummy" filler neck
    Griffin Chevy Engine Radiator Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.


  • Book - How to Build Max Performance Ford V8s on a Budget
    Book - How to Build Max Performance Ford V8s on a Budget
    x
                This engine building book addresses high-performance V-8 engines such as the 289, 302, 351ci small-blocks found in Mustangs, as well as the FE series of big-blocks. Emphasis throughout is a budget approach to building high performance powerplants through the use of over-the-counter factory components and selected aftermarket pieces. Includes realistic, low-cost formulas for building serious horsepower in Ford V-8 engines.  128 pages.
            
  • 1932 Ford Xenon Headlights w/ Turn Signals
    1932 Ford Xenon Headlights w/ Turn Signals
    x
                

    Bringing your hot rod out of the dark ages!  This is the same beautifully polished stainless headlight we've always offered but with today's technology inside!

    • A-4 XENON charged halogen lighting
    • The same lighting technology found on today's supercars an other high performance vehicles
    • Wiring pigtail matches standard lighting configurations for easy retro-fit conversion
    • Integrated amber LED turn signals
  • Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    x
                Please view the product's page for more information
            
  • Ford Racing M-0750-P2013 Performance Equipment Catalog
    Ford Racing M-0750-P2013 Performance Equipment Catalog
    x
                The must have catalog for ford fanatics.  The ford racing catalog for all your high performance equipment needs.
            
  • Walker B-Z-491-2 Z-Series 1932 Ford Radiator for Ford Engine
    Walker B-Z-491-2 Z-Series 1932 Ford Radiator for Ford Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions. 

    • Works with original, reproduction, steel or fiberglass grille shells
    • 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   

  • Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    S/B Ford engines can take advantage of less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by

  • Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your v

  • Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches.

    If your rules require a full facing or sprung hub disc, the Ram 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Walker C-487-2 Cobra 1930-1931 Ford Model A Radiator for Chevy Engine
    Walker C-487-2 Cobra 1930-1931 Ford Model A Radiator for Chevy Engine
    x
                Please view the product's page for more information
            
  • Walker B-Z-Ac493-1 Z-Series 1942-48 Ford Radiator/Condser Ford Engine
    Walker B-Z-Ac493-1 Z-Series 1942-48 Ford Radiator/Condser Ford Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Works with original, reproduction, steel or fiberglass grille shells
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Griffin 4-237BD-FAA Ford 1937-39 Standard-1938 Deluxe Radiator-Ford V8
    Griffin 4-237BD-FAA Ford 1937-39 Standard-1938 Deluxe Radiator-Ford V8
    x
                

    Griffin Aluminum radiators give superior cooling over a brass/copper radiator. Features 2 rows of 1" tubes furnace brazed into the core which provides 40% greater tube-to-fin contact over a copper/brass radiator.

    • Built-in HD automatic transmission oil cooler
    • Hood support brackets are included
    • Brackets on top (engine side) for gille shell (not pictured)
    • Mount brackets on all four corners
    • No "dummy" filler neck

    Griffin Ford Engine Radiator Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker B-Z-Ac495-1 Z-Series 37-39 Ford Radiator, Condenser-Ford Engine
    Walker B-Z-Ac495-1 Z-Series 37-39 Ford Radiator, Condenser-Ford Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Use Walker Fan Shroud Style E

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Powergen 1949-1953 Flathead Ford One Wire Alternator, 6 Volt
    Powergen 1949-1953 Flathead Ford One Wire Alternator, 6 Volt
    x
                

    If you like traditional looks and reliable, modern performance, you’ll love this cool Flathead alternator. It has the look of an original generator, but is really a 6-volt, positive-ground alternator that produces 60 amps at idle and 75 amps going down the road. This 1-wire alternator is designed to fit 1949-1953 Ford & Mercury Cars and 1948-1953 Ford Trucks with Flathead V8s and features a simple one-wire hookup.

    We offer it in black painted or polished aluminum, and both include stock-appearing mounting brackets (the stock fan carrier bolts to that bracket) and pulleys that accept wide 5/8” belts.

    • Easy one-wire hookup
    • 5/8" wide belt pulley included
    • If using 3/8" wide belt, order pulley # 91067178
    • Uses stock-appearing bracket and fan carrier bolts

    Flathead One Wire Alternator Instructions (PDF)

    Powergen Cutaway View (Link) 

    Flathead One Wire Alternator Specifications (Link) 

Goto Previous PagePrevious Page
1 2 3 4 5 ... 9