Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford mustang front suspension" Page 1 of 2

  • Speedway 1933-34 Ford Mustang II Crossmember
    Speedway 1933-34 Ford Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Mustang II Power and Manual Rack & Pinions
    Mustang II Power and Manual Rack & Pinions
    x
                Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

    MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Heidts Mustang II Crossmember for 1953-56 Ford F-100 Pickup Frame, Weld-On
    Heidts Mustang II Crossmember for 1953-56 Ford F-100 Pickup Frame, Weld-On
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1948-1952 Ford Pick-Up Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1948-1952 Ford Pick-Up Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Heidts PX-326 1967-70 Mustang Replacement Inner Fender Panels
    Heidts PX-326 1967-70 Mustang Replacement Inner Fender Panels
    x
                These stamped steel inner fender panels are replacements for 1967-70  Ford Mustangs with Mustang II style front suspension.  They feature a  smooth surface finish with no bead rolls.
    • Replacement stamped steel
    • 1967-70 Ford Mustangs with Mustang II style front suspension
    • Smooth surface with no bead rolls
    • Hardware included
  • Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    x
                

    These Speedway Mustang IFS kits for 1940-46 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1940-1946 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Mustang II IFS w/ New Stock Control Arms and Dropped Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Dropped Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get    brand new stamped steel upper and lower control arms with polyurethane    bushings, 2" dropped steel spindles, Rubber Brake Lines, air springs with  shocks, new manual rack & pinion with bushings   or remanufactured  power rack & pinion with bushings and an 11"  brake  kit featuring  GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4"  bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod (91034315)

  • Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, new steel spindles, Rubber Brake Lines, air springs with shocks, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • New steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod

  • Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, steel 2" dropped spindles, Rubber Brake Lines, Carrera coil-over shock & spring, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • Carrera coil-over shock & spring
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (

  • Mustang II IFS, Stock Control Arms, Springs, and Shocks, Dropped Spindles
    Mustang II IFS, Stock Control Arms, Springs, and Shocks, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get  brand new stamped steel upper and lower control arms with polyurethane  bushings, steel 2" dropped spindles, Rubber Brake Lines, new black stock  type springs & shocks, new manual rack & pinion with bushings  or remanufactured power rack & pinion with bushings and an 11" brake  kit featuring GM Metric-style calipers, with your choice of 5 x 4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • New black stock-type springs
      • New shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    WARNING: To offer our customers a better range of spring rates, the springs

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Steve Smith Autosports S289 Book - Building the Mustang Mini Stock
    Steve Smith Autosports S289 Book - Building the Mustang Mini Stock
    x
                

    A step-by-step buildup of a Mustang Mini Stock project car. Provides detailed instruction on how to build you own race car.

    • Finding a suitable car
    • Stripping the car
    • Installing a roll cage
    • Working with a unibody chassis
    • Using a McPherson strut front suspension
    • Designing the front suspension geometry
    • Working with the stock 4-point rear suspension and coil springs
    • Complete race car fabrication and preparation
    • Complete chassis setup and alignment
    • Scaling the car and adjusting the weight
    • Chassis adjustments and troubleshooting
    • Ford 2300cc performance engine build-up
    • For dirt and paved tracks
  • 2 Inch Drop Ford Upper Steering Arm
    2 Inch Drop Ford Upper Steering Arm
    x
                

    This 2" drop steel steering arm fits '37-'48 Ford style spindles. It is tapered to accept an 11/16" tie rod end. Designed for use on upper spindle mount in "traditional steering" set-ups using a reversed Corvair, '48-'56 Ford pickup, or '68-'73 Mustang steering box.

    Parallel Steering Set-Up Guide (GIF)

  • AFCO 3875CR Pro Touring Single Adjustable Rear Shock, Ford/Mercury/GM
    AFCO 3875CR Pro Touring Single Adjustable Rear Shock, Ford/Mercury/GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

  • AFCO 3870CR Pro Touring Double Adjustable Rear Shock, Ford/Mercury/GM
    AFCO 3870CR Pro Touring Double Adjustable Rear Shock, Ford/Mercury/GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

Goto Previous PagePrevious Page
1 2