Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford mechanical distributor" Page 1 of 1

  • Small Block Ford 289-302 HEI Distributor
    Small Block Ford 289-302 HEI Distributor
    x
                Finally an affordable distributor for you Ford guys! Basically this is a GM HEI distributor that fits 289-302 Fords. It is fully self-contained and requires only one wire to hook-up. No need for an MSD box. NOT compatible with computer controlled vehicles.

    It uses the GM HEI cap, rotor and module, and includes mechanical and vacuum advances. Comes complete as shown.  Shaft diameter of .450".

    910-12350 Instructions (PDF)

     

    Note: This distributor has an O-ring seal that has a VERY tight fit when installing for the first time. We suggest using a small amount of lithium grease or silicone lubricant on this seal to ease installation.

  • MSD 8582 Ford 289-302 Billet Distributor
    MSD 8582 Ford 289-302 Billet Distributor
    x
                Please view the product's page for more information
            
  • MSD 8573 1949-53 Flathead Ford V8 Electronic Distributor
    MSD 8573 1949-53 Flathead Ford V8 Electronic Distributor
    x
                

    Early Flathead racers and cruisers alike will be excited to see these front mount flathead distributors! MSD Ready-to-Run distributors do not need an external control box, so there's a simple and clean installation with only three wires to connect. Features a maintenance free magnetic pickup for unsurpassed reliability. Has HEI style terminals.  For 12 volt negative ground applications only.

    Designed for 1949-1953 Ford Flathead V8 engines.

    547-8573 Instructions (PDF)

  • MSD 8473 2.3 Ford Billet Distributor
    MSD 8473 2.3 Ford Billet Distributor
    x
                Please view the product's page for more information
            
  • MSD 8584 Ford Small Block 351W Billet Distributor
    MSD 8584 Ford Small Block 351W Billet Distributor
    x
                

    MSD's Billet 351W Distributor is for Ford enthusiasts who are serious about performance! Just under the brass terminals of the MSD cap and rotor is an easy-to-adjust mechanical advance assembly. The assembly is fine blanked from chro-moly steel, TIG-welded for strength plus receives a QPQ coating. The precision weights glide on nylon bushings for smooth advancement and different springs and stop bushings are supplied so a variety of advance curves can be tuned. The steel shaft that spins the advance and reluctor receives a friction reducing coating plus is guided by a sealed ball bearing and long sintered bushing. This combination provides stable timing signals and spark delivery at any rpm. Triggering chores are handled by MSD’s race proven, maintenance-free magnetic pick-up. 

    Fits 351 Windsor Small Block Ford V8.

    547-8584 Instructions (PDF)

  • HEI Distributor For Roller Cams, 302 Ford
    HEI Distributor For Roller Cams, 302 Ford
    x
                
    • HEI for 302 Ford
    • High performance ignition module
    • Brass terminals in cap
    • 50,000V coil
    • Hardened gear
    • Mechanical advance
    • High perf. rotor
    • Coil cover
    • Vacuum advance
    • Incredible Price
    NOTE: Will NOT work with billet roller cams.
  • 351W Ford HEI Distributor
    $129.99
    Product Rating: 5.00 Stars
    351W Ford HEI Distributor
    x
                Finally an affordable distributor for you Ford guys! 

    Basically this is a GM HEI distributor that fits 351W Fords. It is fully self-contained and requires only one wire to hook-up. No need for an MSD box. Comes complete as shown. Just drop them in and go!

    • Main shaft is 5/16" I.D. in hex pattern
    • Housing of seal area is 1.560" O.D.
    • Distance from flange at seal area to end of shaft is 4-15/16"
    • Gear is 1.23" O.D.

    It uses the GM HEI cap, rotor and module, and includes mechanical and vacuum advances.

    High Performance HEI Distributor Installation Instructions (pdf)

  • MSD 8383 Ford Y-Block Distributor
    MSD 8383 Ford Y-Block Distributor
    x
                Please view the product's page for more information
            
  • Small Block Ford 289-302 Mag-Look Electronic Distributor
    Small Block Ford 289-302 Mag-Look Electronic Distributor
    x
                

    If you don't want a magneto, but love the looks, get one of these electronic distributors! These fully self-contained distributors feature customizable full centrifugal advance for ease of starting along with 2-wire hook-up that anyone can handle. All modern electronics give you a "State-of-the-Art" ignition system. Includes detailed instruction sheet.

    • Has an internal coil rated at 2.5 amps
    • Requires spiral core (resistor core) plug wires
    • 3.5" diameter 6061-T6 billet aluminum housing
    • Cast iron drive gear
    • Electronic pickup trigger mechanism

    Small Block Ford Electric Distributor Installation Instructions (PDF)

  • Mallory Ignition 2538701 Ford Y-Block Dual Point Distributor
    Mallory Ignition 2538701 Ford Y-Block Dual Point Distributor
    x
                

    Mallory 1955-1962 Ford Y-Block Dual Point Distributor calibrated for maximum performance w/ adjustable mechanical advance. Stabilized dual contact points eliminate point float and bounce to increase coil output. Get maximum performance at any RPM!

    Fits 1955-1962 Ford 256, 272, 292, and 312 Y block engines and 1955-1958 Linclon/Mercury/Edsel 341-368 Y block engines.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Uses special heavy-duty points for increased RPM range & coil output
    • Ready to install & run

    Mallory Ford Y-Block Dual Point Distributor Instructions 500-2538701

  • PerTronix D130701 Flame-Thrower S/B Ford 289-302 Billet Distributor
    PerTronix D130701 Flame-Thrower S/B Ford 289-302 Billet Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.). Fits Small Bock Ford 221, 260, 289, and 302 V8 (except 5.0L).

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13701 Instructions (PDF)

    For even more performance, consider adding a F

  • MSD 8352 Ford 289-302 Ready-To-Run Distributor
    MSD 8352 Ford 289-302 Ready-To-Run Distributor
    x
                Please view the product's page for more information
            
  • Ford 292-312 Y-Block Mag-Look Electronic Distributors
    Ford 292-312 Y-Block Mag-Look Electronic Distributors
    x
                If you don't want a magneto, but love the looks, get one of these Ford 292-312 Y-Block electronic distributors!

    These fully self-contained Ford Y-Block distributors feature full centrifugal advance for ease of starting along with 2-wire hook-up that anyone can handle. Has an internal coil. All modern electronics give you a "State-of-the-Art" ignition system.
  • MSD 8354 Ford 351W Ready-To-Run Pro-Billet Distributor
    MSD 8354 Ford 351W Ready-To-Run Pro-Billet Distributor
    x
                Please view the product's page for more information
            
  • 1949-53 Flathead Ford Electronic Distributor
    1949-53 Flathead Ford Electronic Distributor
    x
                

    Speedway Motors offers this billet aluminum electronic distributor for the fabulous 1949-1953 Flathead Ford.

    • Billet 6061-T6 aluminum housing
    • Hardened steel shaft
    • Sealed ball bearing & sintered busing
    • Extremely accurate magnetic pickup 
    • Mechanical advance only (no vacuum advance) 
    • Comes with drive gear installed

    NOTE: Requires high energy electronic control box # 910-2015 and coil # 910-8223.

    1949-1953 Flathead Ford Electronic Distributor Installation Instructions (PDF)

  • Ford 2.3 Billet Distributor
    $99.99
    Product Rating: 3.00 Stars
    Ford 2.3 Billet Distributor
    x
                Our billet aluminum distributor for 2300 or 2.3 Liter SOHC Ford 4 cylinder engines is far superior to stock units and give you a higher spark energy and more accurate timing.  

    Requires an ignition box, mechanical advance only.
  • Mallory Ignition 3738701 Ford Y-Block Electronic Distributor
    Mallory Ignition 3738701 Ford Y-Block Electronic Distributor
    x
                

    These Mallory Ford Y-Block distributors are triggered by the Unilite photo-optic infrared LED system. Gain improved combustion efficiency and economy, increased spark plug life & cold weather starting, and maintenance free operation.

    Fits 1955-1964 Ford 256, 272, 292, and 312 Y block engines and 1955-1958 Linclon/Mercury/Edsel 341-368 Y block engines.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Includes Super-Duty cap & rotor with brass terminals
    • Easy 3-wire installation
    • No external ignition control box required

    Mallory Ford Y-Block Unilite Distributor Instructions 500-3738701 (PDF)

  • PerTronix D132701 Flame-Thrower Ford 351C, 429, 460 Distributor
    PerTronix D132701 Flame-Thrower Ford 351C, 429, 460 Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.). Fits Big Bock Ford 351C, 351M, 400, 429, and 460 V8 engines.

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13271 Instructions (PDF)

    For even more performance, consider adding 

  • Mallory Ignition 2572101 32-41 Flathead 3 Bolt Dual Point Distributor
    Mallory Ignition 2572101 32-41 Flathead 3 Bolt Dual Point Distributor
    x
                

    Mallory dual point distributors stabilize contact points eliminating point float and bounce to increase coil output. Super-Duty Cap and Rotor feature brass terminals to prevent shorting and arcing. Distributor is "ready-to-run" as the points, condenser, rotor and cap are all installed. Points are set to the proper gap.

    • Fits '32-'41 3-bolt mount Flathead V8
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Uses special heavy-duty points for increased RPM range & coil output
    • Ready to install & run

    500-2571601 Instructions (PDF)

    Note: This distributor is very likely to be in the way of the stock fan when used on 1941-1948 Ford and Mercurys. An electric fan may solve this problem.

  • Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    x
                

    Mallory Magnetic Breakerless Electronic Distributor for 1932-1941 Ford Flathead V8 with the 3-bolt mount. Includes Mallory Super-Duty cap (points style) and rotor with brass terminals.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Easy 3-wire hookup
    • Does not require an external control box
    • For 12 volt systems only

    500-5071601 Instructions (PDF)

     

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

  • Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
    Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
    x
                

    Tried and true Mallory electronic distributor for your 1949-1953 Flathead Ford. Features magnetic breakerless ignition technology for greatly improved accuracy versus points-style distributors. For 12 volt systems only.

    • Easy 3-wire hookup
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Includes Mallory Super-Duty Cap and Rotor with brass terminals
    • Distributor drive gear not included (sold separately)

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

    500-5027501 Instructions (PDF)

  • Mallory Ignition 609 Replacement Magnetic Breakerless Module
    Mallory Ignition 609 Replacement Magnetic Breakerless Module
    x
                

    Mallory's Magnetic Breakerless Ignition Modules are self contained module assemblies which have no moving parts to wear out. Using Mallory's time tested breakerless ignition circuit, combined with modern surface mount Thermal-Cladé construction, these ignition modules can drive both OEM and high performance ignition coils. Hookup is as easy as a three wire connection.

     

  • PerTronix D133701 Flame-Thrower FE Ford 352, 390, 428 Distributor
    PerTronix D133701 Flame-Thrower FE Ford 352, 390, 428 Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.). Fits Ford FE 352, 360, 390, 427, and 428 V8 engines.

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13371 Instructions (PDF)

    For even more performance, consider adding a Flame

  • PerTronix D131701 Flame-Thrower Ford 351W Billet Distributor
    PerTronix D131701 Flame-Thrower Ford 351W Billet Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.).

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13711 Instructions (PDF)

    For even more performance, consider adding a Flame-Thrower coil for increased spark energy and higher RPM po

  • MSD 8353 1932-1948 Flathead 3-Bolt Distributor
    MSD 8353 1932-1948 Flathead 3-Bolt Distributor
    x
                

    Early Flathead racers and cruisers alike will be excited to see these front mount Flathead Distributors! These distributors are built around a CNC-machined billet aluminum housing for precise tolerances.

    The distributor is topped off with our an MSD Crab Cap with spark plug style terminals for improvied wire connections. Just under the cap and Rynite race rotor is MSD's adjustable mechanical advance. This assembly features chromoly construction with TIG-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your Flathead's specs. 

    Just under the advance is MSD's race-proven magnetic pick-up. This puck, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition Control. Bring your Flathead up-to-date with MSD performance.

  • Mallory Ignition 2572001 42-48 Flathead 2 Bolt Dual Point Distributor
    Mallory Ignition 2572001 42-48 Flathead 2 Bolt Dual Point Distributor
    x
                

    Mallory dual point distributors stabilize contact points eliminating point float and bounce to increase coil output. Super-Duty Cap and Rotor feature brass terminals to prevent shorting and arcing.

    • For '42-'48 Flatheads with 2-bolt mount
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Uses special heavy-duty points for increased RPM range & coil output
    • Ready to install & run

    500-2318001 Instructions (PDF)

  • Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    x
                Mallory Magnetic Breakerless Electronic Distributor for 1942-1948 Ford  Flathead V8 with the 2-bolt mount. Easy 3-wire hookup. Adjustable mechanical  advance. Includes Mallory Super-Duty cap (Points Style) and rotor with brass  terminals. 

    For 12 volt systems only.


    500-5071501 Instructions (PDF)

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil #447-45001, no resistor will be required.

  • Garage Sale - MSD Ford 289-302 Billet Distributor
    Garage Sale
    Garage Sale - MSD Ford 289-302 Billet Distributor
    x
                

    MSD's billet distributors are for Ford enthusiasts who are serious about performance! Just under the brass terminals of the MSD cap and rotor is an easy-to-adjust mechanical advance assembly. The assembly is fine blanked from chro-moly steel, TIG-welded for strength plus receives a QPQ coating. The precision weights glide on nylon bushings for smooth advancement and different springs and stop bushings are supplied so a variety of advance curves can be tuned. The steel shaft that spins the advance and reluctor receives a friction reducing coating plus is guided by a sealed ball bearing and long sintered bushing. This combination provides stable timing signals and spark delivery at any rpm. Triggering chores are handled by MSD’s race proven, maintenance-free magnetic pick-up. 

    Fits 289-302 Small Block Ford V8. Must be used with an MSD 6, 7, 8 or 10 Series ignition control.

    547-8582 Instructions (PDF) 

     

    This distributor is garage sale priced because it has been test fit and returned.  

    &n

  • Street Demon 1900 625 CFM 4 Barrel Carburetor Carburetor, Ball Burnished Alum
    Street Demon 1900 625 CFM 4 Barrel Carburetor Carburetor, Ball Burnished Alum
    x
                Please view the product's page for more information
            
  • Street Demon 1902 625 CFM 4 Barrel Carburetor, Polished Aluminum
    Street Demon 1902 625 CFM 4 Barrel Carburetor, Polished Aluminum
    x
                Please view the product's page for more information
            
  • Garage Sale - Small Block Ford 289-302 Mag-Look Electronic Distributor
    Garage Sale
    Garage Sale - Small Block Ford 289-302 Mag-Look Electronic Distributor
    x
                

    If you don't want a magneto, but love the looks, get one of these electronic distributors! These fully self-contained distributors feature customizable full centrifugal advance for ease of starting along with 2-wire hook-up that anyone can handle. All modern electronics give you a "State-of-the-Art" ignition system. Includes detailed instruction sheet.

    • Has an internal coil rated at 2.5 amps
    • Requires spiral core (resistor core) plug wires
    • 3.5" diameter 6061-T6 billet aluminum housing
    • Cast iron drive gear
    • Electronic pickup trigger mechanism

    910-15275 Instructions (PDF)

     

    This distributor is garage sale priced because it has been test fit and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 351W Ford HEI Distributor
    $89.99
    $129.99
    Garage Sale
    Garage Sale - 351W Ford HEI Distributor
    x
                Finally an affordable distributor for you Ford guys!

    Basically this is a GM HEI distributor that fits 351W Fords. It is fully self-contained and requires only one wire to hook-up. No need for an MSD box. Comes complete as shown. Just drop them in and go!

    It uses the GM HEI cap, rotor and module, and includes mechanical and vacuum advances.

    910-12360 Instructions (pdf)

     

    This distributor is garage sale priced because the gear came unattached. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS