Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford engine cushion" Page 1 of 1

  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    x
                

    This specially designed frame adapter allows professional installation of almost any engine into the 1953-1964 Ford pickup frame. Heavy duty construction is designed to mount large motors.

    Engine Mounting Guide

    1. Combine with one of the following motor mounts:
    2. Then add our cushion kit 720-9314 to finish your conversion.
  • 1928-1934 Ford Frame Adapters
    1928-1934 Ford Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most every engine into 1928-1934 Ford frames. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Guide (GIF)

  • 1935-1940 Ford/Mercury Frame Adapters
    1935-1940 Ford/Mercury Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most every engine into 1935-1940 Ford/Mercury passenger car frames. These spacers raise the engine for tie rod clearance. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Illustration (GIF)

     

    Note: Please note that these adapters are not normally used on 1941-48 Fords and Mercurys. These cars will use a front motor plate and cushion kit only. The 1941-1948 Ford/Mercury requires no further adapters.

  • Flathead V8 to Ford AOD Transmission Conversion Kit
    Flathead V8 to Ford AOD Transmission Conversion Kit
    x
                

    Adapt your 1949-1953 Ford Flathead V8 engine to a modern Ford AOD automatic overdrive transmission so you can keep those stump-pulling low rear end gears, while still maintaining engine life and gas mileage. Plus, the lightweight flexplate and torque converter do wonders for throttle response and stop-and-go driving!

    This kit includes Speedway's Street King AOD Ford transmission compltely remanufactured with heavy duty clutches, special shift kit, torque converter, engine adapter, special flexplate, modified 12-volt starter, hardware and instructions.

    Transmission has a one year warranty.

    NOTE: Must be used with open drive rearend (not included). Cooler, shifter, and chrome dress-up parts are sold separately. Fill tube, dipstick and kickdown cable are included. 

  • 1962-1994 Small Block Ford 289-302 Engine Mount
    1962-1994 Small Block Ford 289-302 Engine Mount
    x
                

    Specially designed brackets to mount your 1962-1994 S/B Ford or Mercury 260-289-302 V8 into almost any chassis. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Guide (GIF)

    Small Block Ford Motor Mount Installation Instructions (PDF)

  • 1949-1953 Ford/Mercury Frame Adapters
    1949-1953 Ford/Mercury Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most every engine into 1949-1953 Ford/Mercury passenger car frames. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Illustration (GIF)

     

    135-3294 Instructions (PDF)

  • Ford FE Series Big Block Motor Mount
    Ford FE Series Big Block Motor Mount
    x
                Mounts a 352, 360, 390, 406, 427 or 428 Ford FE V8 engine into frames up to 38" wide. Uses heavy 1-1/2" O.D. mild steel tubing. Black powder coat finish. 

     


    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Big Block Ford Current Big Block Motor Mount
    Big Block Ford Current Big Block Motor Mount
    x
                

    Mounts 1969-up 429 and 460 engines in most frames from 28"-38" wide. Just trim to width and either weld it directly to frame or to the 3 hole flanges (included) for bolt-in convenience. Black powder coat finish.

    720-9313 Instructions (PDF)

     

     

    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Small Block Chevy to 1928-48 Ford Front Motor Mount
    Small Block Chevy to 1928-48 Ford Front Motor Mount
    x
                

    Front motor mount. Heat treated aluminum. Mounts into 1928-48 Ford, Chevy and similar chassis. Required cushion kit #720-9314.

    Engine Mounting Illustration

  • Speedway Street King Ford AOD Transmission
    Speedway Street King Ford AOD Transmission
    x
                

    Hook your 289-302-351W Ford V8 engine to a modern Ford AOD automatic overdrive transmission so you can keep those stump-pulling low rear end gears. This kit includes Speedway's Street King AOD Ford transmission compltely remanufactured with heavy duty clutches, special shift kit, and 12" torque converter. Street King units are perfect as a replacement on any Fox body Mustang, or as an upgrade for your restomod or Ford powered street rod.

    Requires a 164-tooth flexplate (NOT included). Transmission has a one year warranty.

    NOTE: Must also purchase block plate listed for proper torque converter engagement.  

    574-53103 Instructions (PDF) 

  • Universal Engine Mount Kits
    $99.99
    Product Rating: 4.67 Stars
    Universal Engine Mount Kits
    x
                

    Available for small block Chevy, GM LS or Ford applications.

    Each kit includes:

    • Weld on frame pads
    • Rubber bolt through cushion
    • Engine pads
    • Hardware
  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Trans-Dapt 4037 Big Block Ford to 1953-1964 Ford Pickup Motor Mounts
    Trans-Dapt 4037 Big Block Ford to 1953-1964 Ford Pickup Motor Mounts
    x
                Cross bar style. Mounts Ford 332-428 (except 351/400) V8's into 1953-1964 Ford pick-up and panel trucks. Designed for 28-3⁄4" frame widths. Complete with instructions and hardware.
            
  • Ford 351M-400 Motor Mounts
    $54.99
    Product Rating: 3.00 Stars
    Ford 351M-400 Motor Mounts
    x
                Mounts a 351M-400 Ford V8 into almost any frame up to 38" wide. Uses heavy 1-3/4" O.D. mild steel tubing. Black powder coated.  17" center to center mount tubes for the engine motor mounts.


    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Garage Sale - Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    Garage Sale
    Garage Sale - Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    x
                Please view the product's page for more information