Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford dash billet" Page 1 of 1

  • 1932 Ford Dash Panel
    $129.99
    Product Rating: 5.00 Stars
    1932 Ford Dash Panel
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. AutoMeter gauges. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. 

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1933-1934 Ford Dash Panel, Stewart Warner Gauges
    1933-1934 Ford Dash Panel, Stewart Warner Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with Stewart Warner gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Designed for a 3-3/8" O.D. speedometer and 2-1/16" O.D. auxillary Stewart Warner gauges. 

  • 1933-1934 Ford Dash Panel-Auto Meter Gauges
    1933-1934 Ford Dash Panel-Auto Meter Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with AutoMeter gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    • The inside of the Speedo hole is 3.178" and the outer lip is 3.325"
    • Accessory gauge holes have an inside of 2.070" and an outer lip of 2.250"
    • The light holes in this panel are .165" with an outer lip of .250"

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1932 Ford Stewart Warner Dash Panels
    1932 Ford Stewart Warner Dash Panels
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recessed lip of the factory or aftermarket dash. For use with Stewart Warner gauges.  Stewart Warner gauges only.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Measures approximately 4-3/4" high and 12" wide.

  • Classic Instruments FT53OE 1953-55 F100 Ford Pickup Dash Gauge Set
    Classic Instruments FT53OE 1953-55 F100 Ford Pickup Dash Gauge Set
    x
                The Classic Instruments 53-55 Ford F-100 package  features a dual layer design encompassing a speedometer, tachometer,  fuel, oil, temp, and volts gauges. This truck package will replace the  original instruments in your truck. For an easy installation, this  cluster is back-loaded and fastened with four bolts and one clamp. This  package is LED lit and includes turn signals as well as a blue “halo”  high beam indicator at the top of the speedometer. With a brushed finish  on the billet aluminum bezel, this package will put the finishing touch  on your custom vehicle. 
    • For '53-'55 Ford F100 truck
    • Package includes 6 gauge set pre-assembled in machined aluminum bezel, with glass, pre wired , Led lit,
    • Turn signal and high beam indicators included
    • Standard Ford sender pack included
  • 1940 Ford Dash Panel
    $179.99
    1940 Ford Dash Panel
    x
                

    This billet aluminum dash panel accepts Autometer street rod gauges and will be the finishing touch for your 1940 Ford dash.

    • Accepts Auto Meter or similar gauges
    • Panel held in place with four tabs that screw in from the back side
    • Speedometer hole is 3-3/16" I.D.
    • Gauge holes are 2-1/16" I.D.
    • Includes three recessed 5/32" holes for L.E.D. high beam and turn signal indicators
  • Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
    Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns without column shift (2" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For tilt column without column shift, 1932 Ford dash
    • 2 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole
    Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns with column shift (2-1/4" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For tilt column, 1932 Ford dash
    • 2-1/4 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.
    Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits steering columns with 1-3/4" O.D.  For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For 1932 Ford dash
    • 1-3/4 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2305280040 1932 Ford  5 Inch Steering Column Drop Mount, GM Van
    Ididit 2305280040 1932 Ford 5 Inch Steering Column Drop Mount, GM Van
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits GM van steering columns with 2" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For GM van steering columns, 1932 Ford dash
    • 2 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
    Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits GM steering columns with 2-3/8" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For GM column, 1932 Ford dash
    • 2-3/8 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • 1951-1952 Ford Truck Gauge Panel
    1951-1952 Ford Truck Gauge Panel
    x
                These polished billet aluminum five-gauge panels fit in the stock openings of your 1951-52 Ford dash, allowing you to easily install a 3-3/8 inch speedometer and four 2-1/16 inch accessory gauges. Gauges sold separately.
            
  • 1953-1955 Ford Truck Gauge Panel
    1953-1955 Ford Truck Gauge Panel
    x
                Brighten up your 1953-55 F-100 dash and gain the benefit of modern instruments with this polished billet aluminum dash panel. The ball-milled panel is designed to accept a 3-3/8 inch speedometer in the center, with two 2-1/16 inch accessory gauges on each side. Gauges sold separately.
            
  • Garage Sale - 1932 Ford Stewart Warner Dash Panels
    Garage Sale
    Garage Sale - 1932 Ford Stewart Warner Dash Panels
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recessed lip of the factory or aftermarket dash. For use with Stewart Warner gauges.  Stewart Warner gauges only.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Measures approximately 4-3/4" high and 12" wide.

     

    This is garage sale priced because it has some minor scratches and three LED's pre-installed.

     

  • Garage Sale - 1940 Ford Dash Panel
    $129.99
    $179.99
    Garage Sale
    Garage Sale - 1940 Ford Dash Panel
    x
                

    This billet aluminum dash panel accepts Autometer street rod gauges and will be the finishing touch for your 1940 Ford dash.

    • Accepts Auto Meter or similar gauges
    • Panel held in place with four tabs that screw in from the back side
    • Speedometer hole is 3-3/16" I.D.
    • Gauge holes are 2-1/16" I.D.
    • Includes three recessed 5/32" holes for L.E.D. high beam and turn signal indicators
    This dash panel is garage sale priced because it has scratches and scuffs in the finish.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    
  • Garage Sale - 1953-1955 Ford Truck Gauge Panel
    Garage Sale
    Garage Sale - 1953-1955 Ford Truck Gauge Panel
    x
                

    Brighten up your 1953-55 F-100 dash and gain the benefit of modern instruments with this polished billet aluminum dash panel. The ball-milled panel is designed to accept a 3-3/8 inch speedometer in the center, with two 2-1/16 inch accessory gauges on each side. Gauges sold separately. 

     

    This is garage sale priced because it has some scratches from shipping.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1951-1952 Ford Truck Gauge Panel
    Garage Sale
    Garage Sale - 1951-1952 Ford Truck Gauge Panel
    x
                

    These polished billet aluminum five-gauge panels fit in the stock openings of your 1951-52 Ford dash, allowing you to easily install a 3-3/8 inch speedometer and four 2-1/16 inch accessory gauges. Gauges sold separately.

     

    This is garage sale priced because it is used and the LED's will need to be replaced.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1951-52 Ford Truck Gauge Panel
    Garage Sale
    Garage Sale - 1951-52 Ford Truck Gauge Panel
    x
                

    These polished billet aluminum five-gauge panels fit in the stock openings of your 1951-52 Ford dash, allowing you to easily install a 3-3/8 inch speedometer and four 2-1/16 inch accessory gauges. Gauges sold separately.

     

    This panel is garage sale priced because it has some scratches and scuffs. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS