Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford brake" Page 1 of 10

  • GM Metric Disc Brake to 9 Inch Ford Bracket Set
    GM Metric Disc Brake to 9 Inch Ford Bracket Set
    x
                Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend.  Hardware sold separately.

    Includes:
    • 2 Caliper brackets
    • 2 Adapter plates
    • 2 Spacer plates
    • 8 5/16" spacers
    • 8 1/8" spacers

    Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

  • 12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    x
                We offer these new iron 12" x 2" brake drums with a 5 on 5-1/2" bolt circle, which are impossible to find elsewhere. Use this brake drum with our Bendix Style self-energizing 12" x 1-3/4" or 12" x 2" backing plate assemblies for 1937-1948 Ford.
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Lokar EC-81FC E-Brake Clevis for Ford Explorer & Wilwood
    Lokar EC-81FC E-Brake Clevis for Ford Explorer & Wilwood
    x
                

    Lokar Clevis Kits adapt Lokar Emergency Brake Cable kits to Ford Explorer and Wilwood Explorer-style rear disc brakes with internal drum hubs (like our 910-31938). Also works with late Corvette rear disc brakes with internal shoe-type parking brake (requires some file-fitting).

    Note: Clevis is included in kit 491-81FU. Ford Explorer rear disc brakes will need a pair of 916-41021 nuts to secure the cable ends to the thick cast iron OEM brackets.

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    x
                

    Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

    Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

    916-31926 Instructions (PDF) 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    Bendix Style Brakes for 1937-48 Ford Spindles, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    Wheel Cylinder Inlet: 7/16"-20 straight thread
    NOT 7/16"-20 IFF
    Inlet fitting will require a sealing washer or O-ring style fitting
    Bolt Pattern: 3-3/8" center-to-center both horizontal and vertically
    If using Model A or B spindles the holes will have to be elongated inward to fit the narrower bolt pattern

    We recommend use of adapter rings 916-31928 to keep the spindle centered in the backing plate 

  • Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    x
                We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware.  

    Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.

    Axle Flange Identification Chart (Link)

  • Early Ford Brake Drum Retainer
    Early Ford Brake Drum Retainer
    x
                If you snap an axle in your non-safety-hub- equipped 1939-48 Ford rear end, you can stop the loss of the brake drum and axle stub with this kit. Includes 2 brackets and hardware. 
            
  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    Brake Kit 1969-77 GM Caliper to Early Ford Spindle, Ford B-P
    x
                

    Easily installs 11" Ford/Mopar rotors and 1969-1977 midsize GM single piston calipers to your 1937-1948 Ford passenger car spindles. No machine work needed. Great for street rods based on 1932-1948 Fords, however, these kits are much too large and heavy for a T-bucket or an early roadster.

    Not for use with bolt-on steering arms.

    Note: Some applications may require you to purchase item (617-8562) with this kit.

    910-31940 Instructions (PDF)

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    x
                

    This complete disc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindles while retaining the original 5 on 5-1/2" bolt circle.

    This kit will work with spindles having either original steering arms or with flat steel steering arms. It will NOT work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications. Will NOT work with early Ford factory wire or steel drum brake wheels. You will need to use a later disc brake steel wheel or aftermarket wheel.

    910-31909 Instructions (PDF)

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • Ford F-100 Brake to 1937-48 Spindle Bearing Conversion Kit
    Ford F-100 Brake to 1937-48 Spindle Bearing Conversion Kit
    x
                

    Kit allows you to install 1953-1956 Ford F-100 11" x 2" drum brakes on your 1937-1948 Ford car spindles. Kit includes new bearings and seals to allow conversion. 

    You must supply 1953-1956 F-100 front backing plates, hubs and 1953-1966 brake drums. Minor grinding required on 1937-1941 spindles.

    Tech Tip: If replacing all brake hardware, 1966 F-100's had self adjusting brakes.

    916-31934 Instructions (PDF)

  • 1939-48 Ford Car Wheel Cylinders, Front
    1939-48 Ford Car Wheel Cylinders, Front
    x
                

    Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting, install corrosion resistant stainless steel sleeves with news pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.

    Features a 7/16"-20 straight thread inlet. To adapt to an AN# 3 brake line, use fitting # 617-4132 along with crush washer # 617-3513. Bleeder is threaded 3/8"-24.

  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    x
                

    These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

    These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 king pin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs
    • Includes king pin kit

    Be sure to include our spindle nut kit (910616004) to properly install these spindles.

    Spindle Identification Guide (GIF)

    910-32104 Instructions (PDF)

  • Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    x
                

    This basic front disc brake conversion kit easily installs big '73-'93 Ford F-150 2WD 11-3/4" rotors on your '37-'48 Ford car and '37-'47 Ford half-ton pickup truck spindles while retaining the original 5 on 5-1/2" wheel bolt circle. The calipers used with this kit are '71-'76 Chevy Impala single-pistion units.

    Kit includes:

    • Caliper brackets
    • Hardware
    • New bearing and seal adapters

    Note: This kit will work with spindles having either original steering arms or with flat steel steering arms. It will not work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications.

    Early Ford Brake Kit Installation Instructions (PDF)

  • Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
    Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
    x
                Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. Please see below for suggested 1973-77 GM type 11" brake rotor part #'s required.

    Kit Includes:
    • GM to Ford brake brackets
    • 1978-Up hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts

    This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.

    702-4475 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Steering and Brake Kit for 48 Inch Ford Axle
    Steering and Brake Kit for 48 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Basic Disc Brake Kit, 1969-77 GM Caliper to Ford Spindle, 5 on 4-3/4
    Basic Disc Brake Kit, 1969-77 GM Caliper to Ford Spindle, 5 on 4-3/4
    x
                This basic front disc brake conversion kit allows you to mount 1969-72 GM mid-size rotors (5 on 4-3/4" wheel bolt pattern) and 1969-77 GM mid-size calipers on your 1937-48 Ford passenger car style spindles. No machine work needed. Bracket is zinc plated.   

    Kit Includes:

    • 1969-1972 GM to Ford brake brackets
    • Hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts

    916-31903 Instructions (PDF)

  • Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407140 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Basic Disc Brake Kit, 1969-77 GM Caliper, Stock Ford Spindle, 5on4-3/4
    Basic Disc Brake Kit, 1969-77 GM Caliper, Stock Ford Spindle, 5on4-3/4
    x
                

    This basic front disc brake conversion kit allows you to easily install '73-'77 GM mid-size 11" rotors (5 on 4-3/4") and '69-'77 mid-size GM single piston calipers onto your '37-'48 Ford passenger car style spindles. No machine work needed.

    Kit includes:

    • 1973-77 GM brake brackets
    • 1973-77 hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts
    Note: Not for use with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or early roadster.

    916-31901 Instructions (PDf)

  • Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    x
                Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '37-'41 Ford style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.
            
  • Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    x
                GM bolt pattern 5 on 4-3/4"

    Easily installs 11" rotors and 1969-77 mid-size GM single piston calipers to your 1937-48 Ford passenger car spindles. No machine work needed.

    Kit Includes:
  • New 11" brake rotor, 5 x 4-3/4"
  • Semi-metallic brake pads
  • GM Caliper slide bolts
  • Rebuilt 1969-77 calipers (7/16"-20 inlets)
  • 1973-77 GM brake brackets
  • 1973-77 hardware
  • New bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Rubber Brake Lines
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Seals
  • Bolt kit for flat steering arm
  • Dust caps
  • Instructions
  • Not for use with bolt-on steering arms.  The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or earlier roadster.

    910-31941 Instructions (pdf)

  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                

    This kit installs '73-'93 Ford F-150 11-3/4" rotors and '71-'76 Chevy Impala calipers on 1948-1956 Ford F-100 spindles.

    Instructions (PDF) 

Goto Previous PagePrevious Page
1 2 3 4 5 ... 10