Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ford 8 inch rear" Page 1 of 3

  • Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    x
                

    This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment. Available in plain finish or polished Stainless Steel.

    Kit includes:

    • Axle Bracket (for 8" or 9" Ford)
    • Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye
    • Frame Bracket

    910-49800 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Low Rear Axle Bracket 5 3/4 Inch
    Low Rear Axle Bracket 5 3/4 Inch
    x
                All brackets are for 3" rear axle application.

    Low Rear Axle Bracket
    Mount radius rods lower than rear axle. 3/8" steel. 5-3/4" long. 3/8" holes.
  • ARP 250-3003 Ford 8.8 and 9 Inch Rear End Ring Gear Bolt Kit, 12pt
    New
    ARP 250-3003 Ford 8.8 and 9 Inch Rear End Ring Gear Bolt Kit, 12pt
    x
                These ring gear bolt kits come complete with 10 black oxide 3/4" 12-point bolts.  They are designed for use with 8.8" and 9" Ford rear ends.
    • 8.8 and 9" Ford ring gear bolts
    • 3/4" head
    • 7/16-20 thread
    • .750 under head length
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Currie CE-98129-28375 28-3/8 Long 31 Spline Rear Axle
    Currie CE-98129-28375 28-3/8 Long 31 Spline Rear Axle
    x
                Please view the product's page for more information
            
  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • 8 Inch Ford Rear End Overhaul Kit
    8 Inch Ford Rear End Overhaul Kit
    x
                Ford 8" Overhaul Kit includes all bearings, pinion nut, pinion seal, gasket, shims, crush collar, sealant, gear marking grease, brush and Loctite.
            
  • Currie CE-98132-29625 29-5/8 Long 31 Spline Rear Axle
    Currie CE-98132-29625 29-5/8 Long 31 Spline Rear Axle
    x
                Please view the product's page for more information
            
  • Currie CE-98129-26375 31 Spline Axle 26-3/8 Inch Long
    Currie CE-98129-26375 31 Spline Axle 26-3/8 Inch Long
    x
                

    Currie axle made to work in the 56" centered Speedway Motors Ford 9" rear housing (910-46100). Our matched axle to complete the set is part number 910-46109 (28-5/8" long).

    • 9 Inch Ford
    • 31 Spline
    • 26-3/8 Inch Long
    • 20-30% stronger than factory axles - increased depth allows for flex without breaking
    • Drilled for both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
    • Includes both 7/16"-20 and 1/2"-20 wheel studs
    • Compatible with "Big Ford - New Style" housing and brakes with 2-1/2" offset
    • Includes a set-20 bearing and retainer you will have to press on
    • Axles sold each, not as a pair

    Currie Rear Axle Installation Instructions

    How to Measure Your Housing Tech Tip (Link)

    Need a certain length not found on our site?  Check out Currie's 9+ Rearend Calculator to have specially sized axles or rearend housings made for your specific application.  Custom orders will be built and processed directly through Currie Enterprizes and shipped to your door. For

  • Currie CE-98129-27375 27-3/8 Long 31 Spline Rear Axle
    Currie CE-98129-27375 27-3/8 Long 31 Spline Rear Axle
    x
                Please view the product's page for more information
            
  • Currie CE-98132-30625 30-5/8 Long 31 Spline Rear Axle
    Currie CE-98132-30625 30-5/8 Long 31 Spline Rear Axle
    x
                Please view the product's page for more information
            
  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Currie CE-98129-28625 28-5/8 Long Rear Axle
    Currie CE-98129-28625 28-5/8 Long Rear Axle
    x
                Please view the product's page for more information
            
  • AFCO 6875R 6875R Reactor Rear Drag Shock, Ford/Mercury, 7 Inch Stroke
    AFCO 6875R 6875R Reactor Rear Drag Shock, Ford/Mercury, 7 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube REAR shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered
    1. The rebound adjustment is the most critical in tuning a drag racing set-up. This adjustment allows the tuner to dial in the "un-loading action" of the chassis and keep the tires planted during the critical first 60' down the track.
    2. Can be used as a coil-over shock with 106-20135D coil-over hardware kit (purchase separate).
    3. Check extended and compressed dimensions.

    See Applications tab for Ford-Mercury chassis fittment.

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 2 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • Bare 58 Inch Centered 9 Inch Ford Rear Axle Housing
    Bare 58 Inch Centered 9 Inch Ford Rear Axle Housing
    x
                

    Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 58" from hub-to-hub. You will need one 29-5/8" long axle and one 27-3/8" long axle.  Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.

    Third member sold separately.

     

  • Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407140 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Book/Manual - High-Performance Differentials, Axles & Drivelines
    Book/Manual - High-Performance Differentials, Axles & Drivelines
    x
                All too often, when an enthusiast builds a  high-performance engine, swaps a more powerful engine into a car, or  mounts sticky tires, the driveline components simply can't handle the  added torque and fail. In addition, differential, axles, and driveline  parts have a limited life span under the power of a high-performance  engine. Also, the proper gear ratios need to be selected and installed  for maximum performance on the street, strip, or track. The performance  of the driveshaft, differential, axle, and other driveline components  needs to match the performance level of a particular engine, so maximum  efficiency, longevity, and reliability can be realized.

    This book covers everything you need to know about selecting the most desirable gear ratio, rebuilding differentials and other driveline components, and most importantly, matching the correct driveline components to engine power output. Learn how to set up a limited-slip differential, install high-performance axle shafts, swap out differential gears, and select the best available products for the driveline. This book covers the Chevy 12-bolt, Ford 8.8-inch, Dana units, and many other popular high-performance axles and rear ends. In addition, it explains rear differential basics, rear differential housings, rebuilding open rear differentials, limited-slip differentials, and factory differentials. Ring and pinion gears, axle housings, axle shafts, driveshafts, and U-joints are also cove
  • 1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 11 Inch Wide
    1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 11 Inch Wide
    x
                

    Speedway Fiberglass rear fenders for your 1926-1927 Ford Model 'T' Coupe and Roadster.

    • 11-1/16" wide at center top
    • 9-3/8" wide at front by running board
    • Step inwards at front extends upward 9” from front edge
    • Width at rear at midpoint of inward step is 8-¼”
    • Rear inward step extends from mounting lip downwards 7-½”
    • End to end dimension is 41-½”
    • From floor to top of fender while sitting on floor is 19”

    Choose Stock Width, Left or Right.

  • 1932 Ford Rear Spreader Bar Spacer Shims, 1/8 Inch
    1932 Ford Rear Spreader Bar Spacer Shims, 1/8 Inch
    x
                

    These 1/8" thick spacers allow you to shim your rear spreader bar to propery fit between your aftermarket 1932 Ford rear frame horns. Steel cross bar shims are sold as a pair.

    Note: Spacers are already on an original frame. If you have an aftermarket frame, you will need this spacer kit.

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31936 Instructions (PDF)

  • Bare 56 Inch Centered 9 Inch Ford Housing w/ Axles
    Bare 56 Inch Centered 9 Inch Ford Housing w/ Axles
    x
                

    Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 56" from hub-to-hub.   The pumpkin is centered in the housing, which puts the pinion offset 2-3/8" from center

    Includes a set of Currie 31-spline heat-treated, forged alloy axle shafts. Wheel bolt patterns are dual drilled for 5 on 4 1/2" Ford and 5 on 4 3/4" Chevy, and an access hole is drilled. Axles come with a full installation package which includes one set of five 1/2"-20 Ford style wheel studs, one set of five 7/16"-20 Chevy style wheel studs, one set-20 tapered roller bearing with race, seal, & collar, and one heavy duty late model large bearing style retainer plate. Axle bearing does not come pressed onto the axle shaft, and wheel studs are not installed.

    Third member sold separately.

  • Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Steel rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 3" backspace.

    NSRA Legal

    910-31933 Instructions (PDF)

  • Deluxe Shockwave Rear Suspension Kit, Plain, 13 Inch Ride Height
    Deluxe Shockwave Rear Suspension Kit, Plain, 13 Inch Ride Height
    x
                

    These Deluxe Shockwave rear suspension kits feature smooth-riding Ridetech Shockwave air shocks and compressor. These 7000 series Shockwaves are 4" in diameter and have a load capacity of 780 lbs. @ 100 psi air pressure. They work well with a rear axle weight of 1500 lbs. or less. No air tank is required.

    Kit includes two Shockwave air-over-shocks, air compressor, air control panel, plain steel panhard bar, two plain steel 32" radius rods with mounting brackets, and all necessary hardware.

    916-49070 Instructions (PDF)

  • Deluxe Shockwave Rear Suspension Kit, Chrome, 13 Inch Ride Height
    Deluxe Shockwave Rear Suspension Kit, Chrome, 13 Inch Ride Height
    x
                

    These Deluxe Shockwave rear suspension kits feature smooth-riding Ridetech Shockwave air shocks and compressor. These 7000 series Shockwaves are 4" in diameter and have a load capacity of 780 lbs. @ 100 psi air pressure. They work well with a rear axle weight of 1500 lbs. or less. No air tank is required.

    Kit includes two Shockwave air-over-shocks, air compressor, air control panel, plain steel panhard bar, two polished stainless steel 32" radius rods with mounting brackets, and all necessary hardware.

    916-49080 Instructions (PDF)

  • Deluxe Shockwave Rear Suspension Kit, Plain, 14-1/2 Inch Ride Height
    Deluxe Shockwave Rear Suspension Kit, Plain, 14-1/2 Inch Ride Height
    x
                

    These Deluxe Shockwave rear suspension kits feature smooth-riding Ridetech Shockwave air shocks and compressor. These 7000 series Shockwaves are 4" in diameter and have a load capacity of 780 lbs. @ 100 psi air pressure. They work well with a rear axle weight of 1500 lbs. or less. No air tank is required.

    Kit includes two Shockwave air-over-shocks, air compressor, air control panel, plain steel panhard bar, two plain steel 32" radius rods with mounting brackets, and all necessary hardware.

    916-49072 Instructions (PDF)

  • Deluxe Shockwave Rear Suspension Kit, Chrome, 14-1/2 Inch Ride Height
    Deluxe Shockwave Rear Suspension Kit, Chrome, 14-1/2 Inch Ride Height
    x
                

    These Deluxe Shockwave rear suspension kits feature smooth-riding Ridetech Shockwave air shocks and compressor. These 7000 series Shockwaves are 4" in diameter and have a load capacity of 780 lbs. @ 100 psi air pressure. They work well with a rear axle weight of 1500 lbs. or less. No air tank is required.

    Kit includes two Shockwave air-over-shocks, air compressor, air control panel, plain steel panhard bar, two polished stainless steel 32" radius rods with mounting brackets, and all necessary hardware.

    916-49082 Instructions (PDF)

  • AFCO 9850-6505 10 Inch Hybrid Brake Rotor for Pinto
    AFCO 9850-6505 10 Inch Hybrid Brake Rotor for Pinto
    x
                

    This brake rotor combines the strength of a '75-'81 Ford-style hub (Granada) with the lighter design of the metric brake rotor for an unbeatable lightweight and durable package.  AFCO engineers designed this rotor with the latest CAD software and testing methods.  Manufactured to withstand rigorous racing environments, the AFCO Hybrid Rotor uses totally new castings designed and built specifically for racing.  It will remove up to 12 lbs. of sprung weight on the front of your car to improve front to rear weight bias and wheel control.

    • Uses GM metric caliper
    • Ford '74-'80 Pinto Spindle
    • Strong and Lightweight
    • Safely remove up to 13 lbs from the front of your car vs stock rotor
    • 14.8# total rotor weight with 5/8" studs
    • 10.13" diameter
    • .813" thickness (pad spacer recommended)

    Instructions (PDF) 

  • Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
    Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
    x
                One size fits all! Fits any inner axle tube with an I.D. between 2-1/2" and 2-3/4". This eliminates ordering the wrong seal and allows you to always have the correct seal on hand. Typical applications* include Ford 9”, Quick change type rears, and 12 bolt GM. All seals are supplied with general installation guidelines. 
    • Inner Axle Seal I.D. = 7/8"
    • Axle sizes/Splines:  1-3/16” thru 1-1/2” / 28-31

     

    * Applications are reference only. Seals may be used on any rear end that is within the part number’s dimensional range. Rears can vary within a single model year and within the same model. Measure listed parameters before ordering.

Goto Previous PagePrevious Page
1 2 3