Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"foot steel brake line" Page 1 of 1

  • Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    x
                Please view the product's page for more information
            
  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Mild Steel 45 Degree Inverted Flare Brake Line Kit
    Mild Steel 45 Degree Inverted Flare Brake Line Kit
    x
                

    You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares.

    This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.

    Brake System Builder Tip (GIF) 

    Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
    x
                

    Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Garage Sale - Stainless Steel Braided Hose, -10 AN, 6 Foot Length
    New
    Garage Sale - Stainless Steel Braided Hose, -10 AN, 6 Foot Length
    x
                

    This hose is garage sale priced because the ends are frayed and one end has been stripped back.  What you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels.

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels.

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBC0400 -4 AN TFE Braided High Pressure Hose, 3/16 Inch ID
    Aeroquip FBC0400 -4 AN TFE Braided High Pressure Hose, 3/16 Inch ID
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Lokar EC-81FHT Stainless Wilwood Style Rear Disc Emergency Brake Cable
    Lokar EC-81FHT Stainless Wilwood Style Rear Disc Emergency Brake Cable
    x
                Please view the product's page for more information
            
  • Garage Sale - Stainless Steel Braided Hose, -6 AN, 14.5 Feet
    Garage Sale
    Garage Sale - Stainless Steel Braided Hose, -6 AN, 14.5 Feet
    x
                

    This hose is garage sale priced because it is  14.5' cut in to 104" and 70" lengths.  Thes ends are frayed.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels. 

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels. 

    Not to be used for brake or power steering applications. Maximum operating pressure